[1]BARILE C. Innovative mechanical characterization of CFRP by using acoustic emission technique[J]. Engineering Fracture Mechanics, 2019,210: 414-421.
[2]ZHANG X, ZOU Z X, WANG K W, et al. A new rail crack detection method using LSTM network for actual application based on AE technology[J]. Applied Acoustics, 2018,142: 78-86.
[3]ZHANG X, WANG K W, WANG Y, et al. Rail crack detection using acoustic emission technique by joint optimization noise clustering and time window feature detection[J]. Applied Acoustics, 2020,160: 107141.
[4]ZHANG X, CUI Y M, WANG Y, et al. An improved AE detection method of rail defect based on multi-level ANC with VSS-LMS[J]. Mechanical Systems and Signal Processing, 2018,99: 420-433.
[5]ZHANG X, HAO Q S, WANG K W, et al. An investigation on acoustic emission detection of rail crack in actual application by chaos theory with improved feature detection method[J]. Journal of Sound and Vibration, 2018,436: 165-182.
[6]ALI J B, FNAIECH N, SAIDI L, et al. Application of empirical mode decomposition and artificial neural network for automatic bearing fault diagnosis based on vibration signals[J]. Applied Acoustics, 2015,89: 16-27.
[7]WU J D, LIAO S Y. A self-adaptive data analysis for fault diagnosis of an automotive air-conditioner blower[J]. Expert Systems with Applications, 2011,38(1): 545-552.
[8]杨宇,于德介,程军圣.基于EMD与神经网络的滚动轴承故障诊断方法[J]. 振动与冲击, 2005,24(1): 85-88.
YANG Yu, YU Dejie, CHENG Junsheng. Rolling bearing fault diagnosis method based on EMD and neural network[J]. Journal of Vibration and Shock, 2005,24(1): 85-88.
[9]ZHOU Y, LIN L, WANG D, et al. A new method to classify railway vehicle axle fatigue crack AE signal[J]. Applied Acoustics, 2018,131: 174-185.
[10]林丽,赵德有.局域波神经网络海洋平台AE信号识别研究[J]. 哈尔滨工程大学学报, 2008(7): 663-667.
LIN Li, ZHAO Deyou. Identification of acoustic emission signals of offshore structures with both local wave method and neural network[J]. Journal of Harbin Engineering University, 2008(7): 663-667.
[11]LEI Y G, HE Z J, ZI Y Y. Application of an intelligent classification method to mechanical fault diagnosis[J]. Expert Systems with Applications, 2009,36(6): 9941-9948.
[12]SINGH D S, ZHAO Q. Pseudo-fault signal assisted EMD for fault detection and isolation in rotating machines[J]. Mechanical Systems and Signal Processing, 2016,81: 202-218.
[13]徐锋,刘云飞.基于EMD-SVD的声发射信号特征提取及分类方法[J].应用基础与工程科学学报, 2014,22(6): 1238-1247.
XU Feng, LIU Yunfei. Feature extraction and classification of acoustic emission signals based on EMD-SVD[J]. Journal of Applied Basic and Engineering Sciences, 2014,22(6): 1238-1247.
[14]MOHEBALI B, TAHMASSEBI A, MEYER-BAESE A, et al. Chapter 14-probabilistic neural networks: a brief overview of theory, implementation, and application [M]// Handbook of Probabilistic Models. New York: Elsevier, 2019.
[15]FATEMI BUSHEHRI S M M, ZARCHI M S. An expert model for self-care problems classification using probabilistic neural network and feature selection approach [J]. Applied Soft Computing, 2019,82: 105545.
[16]TAM C M, TONG T K L, LAU T C T, et al. Diagnosis of prestressed concrete pile defects using probabilistic neural networks[J]. Engineering Structures, 2004,26(8): 1155-1162.
[17]NISHANTH K J, RAVI V. Probabilistic neural network based categorical data imputation[J]. Neurocomputing, 2016,218: 17-25.
[18]ZHOU Y, LIN L, WANG D, et al. A new method to classify railway vehicle axle fatigue crack AE signal[J]. Applied Acoustics, 2018,131: 174-185.
[19]朱瑜,王殿,王海洋.基于EMD和信息熵的滚动轴承故障诊断[J]. 轴承, 2012(6): 50-53.
ZHU Yu, WANG Dian, WANG Haiyang. Fault diagnosis of rolling bearings based on EMD and information entropy[J]. Bearing, 2012(6): 50-53.
[20]齐敏,李大建,郝重阳. 模式识别导论[M]. 北京:清华大学出版社, 2009.
[21]朱荣华.强噪声环境下7N01铝合金损伤声发射检测研究[D]. 哈尔滨:哈尔滨工业大学, 2013.
[22]Guidelines for the avoidance of vibration induced fatigue in process pipework [S]. London: Energy Institute, 2008.
[23]中华人民共和国国家质量监督检验检疫总局.输送流体用无缝钢管: GB/T 8163—2008[S]. 北京:中国标准出版社,2008. |