[1]SCHNEIDER E, HERZER R. Method of monitoring and controlling a screwing process: US 6581472B2[P]. 2003-06-24.
[2]PERSSON E V, ROLOFF A T. Method and apparatus for evaluating clamp force in a bolt by means of ultra-sonic measurements: US 9482588 B2 [P]. 2016-11-01.
[3]王崴, 徐浩, 马跃, 等. 振动工况下螺栓连接自松弛机理研究 [J]. 振动与冲击, 2014,33(22): 198-202.
WANG Wei, XU Hao, MA Yue, et al. Self-loosening mechanism of bolted joints under vibration[J]. Journal of Vibration and Shock, 2014,33(22): 198-202.
[4]寇剑锋, 徐绯, 冯威. 基于应变能法的单搭接螺栓剪切模型 [J]. 爆炸与冲击, 2017,37(1): 1-9.
KOU Jianfeng, XU Fei, FENG Wei. Study of strain energy based shear model for single lap bolt[J]. Explosion and Shock Waves, 2017,37(1): 1-9.
[5]WANG T, SONG G, LIU S, et al. Review of bolted connection monitoring [J]. International Journal of Distributed Sensor Networks, 2013,9(12): 1-8.
[6]BICKFORD J. Introduction to the design and behavior of bolted joints [M]. 4th ed. Boca Raton: CRC Press, 2007.
[7]KONG Q, ZHU J, HO S C M, et al. Tapping and listening: a new approach to bolt looseness monitoring [J]. Smart Materials and Structures, 2018,27(7): 07LT02.
[8]PERSSON E, ROLOFF A. Ultrasonic tightening control of a screw joint: a comparison of the clamp force accuracy from different tightening methods [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2016,230(15): 2595-2602.
[9]SUN Q, YUAN B, MU X, et al. Bolt preload measurement based on the acoustoelastic effect using smart piezoelectric bolt [J]. Smart Materials and Structures, 2019,28(5): 055005.
[10]MARTINEZ J, SISMAN A, ONEN O, et al. A synthetic phased array surface acoustic wave sensor for quantifying bolt tension [J]. Sensors, 2012,12(9): 12265-12278.
[11]VILBRANDT R, SCHRDER M, ALLEMANN H, et al. Quality assurance measures during tightening of various bolts at Wendelstein 7-X [J]. Fusion Engineering and Design, 2009,84: 1941-1946.
[12]STEBLAY B J. New instrumentation for roof bolt load measurement [J]. IEEE Transactions on Industry Applications, 1987,IA-23(4): 731-735.
[13]NASSAR S A, VEERAM A B. Ultrasonic control of fastener tightening using varying wave speed [J]. Journal of Pressure Vessel Technology, 2006,128(3): 427-432.
[14]CHAKI S, CORNELOUP G, LILLAMAND I, et al. Combination of longitudinal and transverse ultrasonic waves for in situ control of the tightening of bolts [J]. Journal of Pressure Vessel Technology, 2007,129(3): 383-390.
[15]KIM N, HONG M. Measurement of axial stress using mode-converted ultrasound [J]. NDT & E International, 2009,42(3): 164-169.
[16]DING X, WU X, WANG Y. Bolt axial stress measurement based on a mode-converted ultrasound method using an electromagnetic acoustic transducer [J]. Ultrasonics, 2014,54(3): 914-920.
[17]孙朝明, 王增勇, 李建文, 等. 声弹效应测量螺栓轴向应力的有限元计算分析 [J]. 振动与冲击, 2019,38(13): 164-171.
SUN Chaoming, WANG Zengyong , LI Jianwen, et al. Calculation of stress measurement for bolt under axial load using acoustoelastic effect by finite element method [J]. Journal of Vibration and Shock, 2019,38(13): 164-171.
[18]BATAKO A D, ROWE W B, MORGAN M N. Temperature measurement in high efficiency deep grinding [J]. International Journal of Machine Tools and Manufacture, 2005,45(11): 1231-1245.
[19]HARTMANN G. Potentials and limitations of ultrasonic clamp load testing [M]. [S.l.]: SAE International, 2007.
[20]王宁, 李宝童, 洪军, 等. 螺栓支承面有效半径的影响因素 [J]. 西安交通大学学报, 2016,46(4): 132-136.
WANG Ning, LI Baotong, HONG Jun, et al. Factors affecting bolt bearing surface effective radius[J]. Journal of Xi’an Jiaotong University, 2016,46(4): 132-136.
[21]ECCLES W, SHERRINGTON I, ARNELL R D. Frictional changes during repeated tightening of zinc plated threaded fasteners [J]. Tribology International, 2010,43(4): 700-707. |