Abstract：Chatter tends to occur during milling process of thin-walled parts due to its poor stiffness. Owing to the rapidly removal of materials, the quick changes in dynamic characteristics results in variable cutting stability. The current research focuses on the passive vibration suppression technology based on the principle of viscous damping in order to increase the damping of thin-walled parts and improve cutting stability. By taking air as an example as the filling medium, the modal test and excitation experiment of the designed damper are carried out. Modal tests show that the damper can significantly improve the damping of thin-walled parts. The vibration peak is reduced by about 60%, and the effect on the suppression of multi vibration modes is observed. The results of the excitation experiment show that the acceleration of thin-walled cylinder parts decreases by 36%-67%.
陈甜甜1，李道靖1，张素燕2，刘争2，杨毅青1. 面向薄壁零件的粘滞阻尼器设计及实验[J]. 振动与冲击, 2022, 41(7): 68-73.
CHEN Tiantian1, LI Daojing1, ZHANG Suyan2, LIU Zheng2, YANG Yiqing1. Design and tests of viscous damper for thin-walled parts. JOURNAL OF VIBRATION AND SHOCK, 2022, 41(7): 68-73.
[1] 蔡力钢，宋晓磊，赵永胜，等. 基于时域振动速度有效值的铣削稳定性研究[J]. 计算机集成制造系统，2014，20(1)：142-147.
CAI Li-gang, SONG Xiao-lei, ZHAO Yong-sheng, et.al. Milling stability based on vibration velocity in time-domain[J]. Computer Integrated Manufacturing Systems, 2014, 20(1):142-147.
[2] Den Hartog J. P. Mechanical vibration[M]. 2nd ed. New York, N. Y., USA:McGraw-Hill, 1940.
[3] Crandall S H, Mark W D. Random Vibration in Mechanical Systems [M]. Pittsburgh: Academic Press, 1963.
[4] Moradi H. Stability improvement and regen-erative chatter suppression in nonlinear mill-ing process via tunable vibration absorber[J]. Journal of Sound and Vibration, 2012, 331(21): 4668-4690.
[5] Yang Y, Muñoa J, Altintas Y. Optimization of multiple tuned mass dampers to suppress machine tool chatter[J]. International Jour-nal of Machine tools & Manufacture, 2010, 50(9): 834-842.
[6] Yang Y, Dai W, Liu Q. Design and imple-mentation of two-degree-of-freedom tuned mass damper in milling vibration mitiga-tion[J]. Journal of Sound and Vibration, 2015, 335: 78-88.
[7] Kolluru K, Axinte D, Becker A. A solution for minimizing vibrations in milling of thin walled casings by applying dampers to workpiece surface[J]. CIRP Annals - Manufacturing Technology, 2013, 62(1):415-418.
[8] Shi J, Song Q, Liu Z, et al. Partial Surface Damper to Suppress Vibration for Thin Walled Plate Milling[J]. Chinese Journal of Mechanical Engineering, 2017, 30(3):632-643.
[9] Yang Y, Xie R, Liu Q. Design of a passive damper with tunable stiffness and its application in thin-walled part milling[J]. The International Journal of Advanced Manufacturing Technology, 2017, 89(9-12):2713-2720.
[10] Ziegert J C, Stanislaus C, Schmitz T L, et al. Enhanced damping in long slender end mills[J]. Journal of Manufacturing Processes, 2006, 8(1): 39-46.
[11] Yang Y, Wang X. Investigation into the linear velocity response of cantilever beam embedded with impact damper[J]. Journal of vibration and control, 2019, 25(7): 1365-1378.
[12] Gubanov G. Broadband pneumatic mass damper for the elimination of workpiece vibrations[J]. CIRP Journal of Manufacturing Science and Technology, 2020, 30: 184-194.
[13] Altintas Y. 数控技术与制造自动化[M]. 化学工业出版社, 2002.
[14] Sims N. Vibration absorbers for chatter suppression: a new analytical tuning methodology. Journal of Sound and Vibration, 301 (3):592–607.
[15] 李玉柱, 苑明顺. 流体力学[M]. 北京：高等教育出版社, 1998.
