Abstract:In order to solve the vibration problem of circular arc gear pumps caused by cavitation, an experimental method of cavitation flow and vibration characteristics of circular arc gear pump based on ensemble empirical mode decomposition(EEMD) is proposed. Based on the cavitation test platform of circular arc gear pumps, EEMD and Hilbert marginal spectrum analysis techniques were introduced to obtain the frequency domain results of monitoring points at different speeds and different outlet pressures, and the vibration characteristics of circular arc gear pump were studied. The test results show that EEMD and Hilbert marginal spectrum analysis technology can effectively identify the outlet vibration characteristics of circular gear pump. At the rated outlet pressure, the vibration acceleration signal at the pump outlet mainly causes the increase of the energy level in the low frequency band, especially in the case of 1000Hz to 1500Hz with the increase of the working speed. At the rated speed, the marginal spectrum peak value, center frequency position and frequency variation range of vibration acceleration signal show a trend of first increasing, then decreasing and then increasing with the increase of outlet pressure. Furthermore, the peak value of marginal spectrum, center frequency and bandwidth of vibration acceleration signal of circular gear pump can be extracted as the characteristic parameters of pump cavitation.
魏小玲,冯永保,刘珂,何祯鑫. 基于EEMD的圆弧齿轮泵空化流动及振动特性试验研究[J]. 振动与冲击, 2022, 41(10): 90-98.
WEI Xiaoling,FENG Yongbao,LIU Ke,HE Zhenxin. Experimental study on the cavitation flow and vibration characteristics of circular arc gear pumps based on EEMD. JOURNAL OF VIBRATION AND SHOCK, 2022, 41(10): 90-98.
[1] Battarra M, Mucchi E. Incipient cavitation detection in external gear pumps by means of vibro-acoustic measurements[J]. Measurement, 2018, 129: 51-61.
[2] Rundo M. Models for flow rate simulation in gear pumps: A review[J]. Energies, 2017, 10(9): 1261.
[3] 强彦,王文安,罗小梅等.宽温域条件下齿轮泵内流场空化强度的变化规律[J].兰州理工大学学报,2019,4505:44-49.
QIANG Yan, WANG Wenan, LUO Xiaomei, et al. Variation regularity of cavitation intensity in flow field of gear pump operating under condition of broad range of temperature. Journal of Lanzhou University of Technology, 2019, 4505: 44-49.
[4] Adamkowski A, Henke A, Lewandowski M. Resonance of torsional vibrations of centrifugal pump shafts due to cavitation erosion of pump impellers[J]. Engineering Failure Analysis, 2016, 70(01): 56-72.
[5] Gohil P P, Saini R P. Effect of temperature, suction head and flow velocity on cavitation in a Francis turbine of small hydro power plant[J]. Energy, 2015, 93(01): 613-624.
[6] Azizi R, Attaran B, Hajnayeb A, et al. Improving accuracy of cavitation severity detection in centrifugal pumps using a hybrid feature selection technique[J]. Measurement, 2017, 108(01): 9-17.
[7] Buono D, di Cola FDS, Senatore A, et al. Modelling approach on a Gerotor pump working in cavitation conditions[J]. Energy Procedia, 2016, 101(01): 701-709.
[8]李阁强,张龙飞,韩伟锋,邓效忠,冯勇.双圆弧斜齿齿轮泵脉动特性分析及齿形设计[J].中国机械工程,2018,29(02):186-192.
LI Geqiang, ZHANG Longfei, HAN Weifeng, et al. Pulsation Characteristic Analysis and Tooth Profile Design of Double-circular-arc Helical Gear Pumps[J]. China mechanical engineering, 2019,38(03):89-95.
[9] 孟璐,刘影,黄彪,高远,吴钦.绕弹性水翼非定常空化流激振动特性研究[J].工程力学,2017,34(08):232-240.
MENG Lu, LIU Ying, HUANG Biao, et al. Investigation of Flow-Induced Vibration Characteristics of Flexible Hydrofoil in Unsteady Cavitation. Engineering Mechanics, 2017, 34(08): 232-240.
[10] Wei Haipeng,Fu Song,Wu Qin,Huang Biao,Wang Guoyu. Experimental and numerical research on cavitating flows around axisymmetric bodies[J]. Journal of Mechanical Science and Technology,2014,28(11).
[11] 刘秀梅,徐化文,李贝贝等.液压节流阀内非定常空化特性的数值分析[J].振动与冲击,2019,38(03):89-95.
LIU Xiumei, XU Huawen, LI Beibei, et al. Numerical analysis for unsteady cavitation characteristics in throttle valve[J]. Journal of vibration and shock, 2019,38(03):89-95.