Evaluation of bearing performance degradation based on MMFE and extensible k-medoids clustering algorithm
ZHAO Congcong1, LIU Yumei2, ZHAO Yinghui3, BAI Yang4, SHI Jihong1
1.College of Engineering and Technology, Jilin Agricultural University, Changchun 130118, China;
2.College of Traffic, Jilin University, Changchun 130022, China;
3.Intelligent Connected Vehicle Development Institute, R&D General Institute, FAW, Changchun 130011, China;
4.Technical Development Department, FAW-Volkswagen Automotive Co., Ltd., Changchun 130011, China
Abstract：Traditional bearing performance degradation assessment methods usually makes qualitative analysis, and takes vertical signal of bearing as the research object, ignoring the correlationship between vibration signals in different directions. To resolve this problem, the multivariable multi-scale fuzzy entropy (MMFE) for evaluating the complexity of multi-channel time series was introduced into the feature extration of bearing operating state. Extenics and k-medoids clustering algorithm were combined to establish the bearing performance degradation evaluation model. By clustering the samples in bearing normal state with k-medoids algorithm, the clustering center of bearing normal state was obtained. According to the Euclidean distance between the tested samples and the normal state clustering center, the extension sets were determined. Furthermore, based on the extension correlation function, the quantitative assessment model of bearing performance degradation was established. The bearing whole life fatigue test was used to verify the effectiveness of the proposed method. The results show that the proposed method can detect the early performance degradation of bearing effectively, evaluate the bearing performance degradation quantitatively as well.
Key words: bearing; performance degradation; multivariable multi-scale fuzzy entropy; k-medoids algorithm; extenics
赵聪聪1，刘玉梅2，赵颖慧3，白杨4，施继红1. 基于MMFE和可拓k-medoids聚类的轴承性能退化评估[J]. 振动与冲击, 2022, 41(17): 123-130.
ZHAO Congcong1, LIU Yumei2, ZHAO Yinghui3, BAI Yang4, SHI Jihong1. Evaluation of bearing performance degradation based on MMFE and extensible k-medoids clustering algorithm. JOURNAL OF VIBRATION AND SHOCK, 2022, 41(17): 123-130.
[1] LIU Yu-mei，ZHAO Cong-cong，XIONG Ming-ye，et al．Assessment of bearing performance degradation via extension and EEMD combined approach[J]．Journal of Central South University，2017，24(5)：1155-1163．
[2] 王国彪，何正嘉，陈雪峰，等．机械故障诊断基础研究“何去何从”[J]．机械工程学报，2013，49(1)：63-72．
WANG Guo-biao，HE Zheng-jia，CHEN Xue-feng，et al．Basic research on machinery fault diagnosis-what is the prescription [J]．Journal of Mechanical Engineering，2013，49(1)：63-72．
[3] 池永为．滚动轴承故障的振动特性分析与智能诊断方法研究[D]．杭州，浙江大学，2018．
[4] AHMED M U，MANDIC D P．Multivariate multiscale entropy analysis[J]．Signal Processing Letters IEEE，2012，19(2)：91-94．
[5] 李洪儒，于贺，田再克，等．基于二元多尺度熵的滚动轴承退化趋势预测[J]．中国机械工程，2017，28(20)：2420–2425 +2433．
LI Hong-ru，YU He，TIAN Zai-ke，et al. Degradation trend prediction of rolling beatings based on two-element multiscale entropy[J]．China Mechanical Engineering，2017，28(20)：2420-2425+2433．
[6] 易彩．高速列车轮对轴承状态表征与故障诊断方法研究[D]．成都，西南交通大学，2015．
[7] Rai A，Upadhyay S H． Bearing performance degradation assessment based on a combination of empirical mode decomposition and K-medoids clustering[J]．Mechanical Systems and Signal Processing，2017，93：16-29．
[8] 郑近德，潘海洋，张俊，等．基于多变量多尺度模糊熵的行星齿轮箱故障诊断[J]．振动与冲击，2019，38(06)：187-193．
ZHENG Jin-de，PAN Hai-yang，ZHANG Jun，et al. Multivariate multiscale fuzzy entropy based planetary gearbox fault diagnosis[J]．Journal of Vibration and Shock，2019，38(06)：187-193．
[9] PREET I，AROR A，DEEPAL I，et al． Analysis of K-Means and K-medoids algorithm for big data[J]．Procedia Computer Science，2016，(78)：507-512．
[10] 张龙，宋成洋，邹友军，等．基于Renyi熵和K-medoids聚类的轴承性能退化评估[J]．振动与冲击，2020，39(20)：24-31+46．
ZHANG Long，SONG Cheng-yang，ZHOU Youjun，et al．Bearing performance degradation assessment based on Renyi entropy and K-medoids clustering[J]．Journal of Vibration and Shock，2020，39(20)：24-31+46．
[11] 赵聪聪，赵颖慧，白杨，等．基于可拓学和SVDD的轴箱轴承故障监测[J]．振动与冲击，2020，39(04)：63-68．
ZHAO Cong-cong，ZHAO Ying-hui，BAI Yang，et al．Fault monitoring for axlebox bearing based on extenics and support vector data description[J]．Journal of Vibration and Shock，2020，39(04)：63-68．
[12] LEE J，QIU H，YU G，et al．Rexnord Technical Services(2007)．IMS，University of Cincinnati．“Bearing Data Set”[OL]．NASA Ames Prognostic Data Repository (http://ti.arc.nasa.gov/project/prognostic-data-repository)，NASA Ames Research Center，Moffett Field，CA，2007.
[13] ZHENG Jin-de，CHENG Jun-sheng，YANG Yu，et al． A rolling bearing fault diagnosis method based on multi-scale fuzzy entropy and variable predictive model-based class discrimination[J]．Mechanism and Machine Theory，2014，78(16)：187-200．
[14] Detroja K P，Gudi R D，Patwardhan S C．Data reduction algorithm based on principle of distributional equivalence for fault diagnosis[J]．Control Engineering Practice，2012，20(10)：1033-1041．
