Vertical-torsional coupled vibration characteristics of strip mill under additional dynamic bending moment of universal joint shaft
HOU Dongxiao1, CHEN Shanping1, FANG Cheng1, SHI Peiming2, WANG Xingang1
1.School of Control Engineering, Northeastern University (Qinhuangdao Campus), Qinhuangdao 066004, China;
2.School of Electrical Engineering, Yanshan University, Qinhuangdao 066004, China
Abstract：Considering the effect of the Angle of universal joint on the additional dynamic bending moment, the vertical torsional coupling vibration model of the lower strip mill affected by the Angle of universal joint was established. The main common amplitude-frequency equation of the rolling mill coupling system is obtained by multi-scale method. The bifurcation characteristics of the coupled vibration system are analyzed by singularity theory, and the transition set of the system and the conditions of different bifurcation forms are obtained. Finally, the actual parameters of 1780 rolling mill were used to analyze the influences of joint Angle, rolling force parameters, joint torsional stiffness and external disturbance force on the main common amplitude and frequency characteristics of the vertical and torsional directions of the rolling mill, so as to provide theoretical reference for further suppressing the vibration of the rolling mill.
Key words: joint angle;Strip rolling mill; additional dynamic moment; vertical-torsional coupled; primary resonance
侯东晓1，陈善平1，方成1，时培明2，王新刚1. 万向接轴附加动态弯矩下板带轧机垂扭耦合振动特性研究[J]. 振动与冲击, 2022, 41(19): 48-54.
HOU Dongxiao1, CHEN Shanping1, FANG Cheng1, SHI Peiming2, WANG Xingang1. Vertical-torsional coupled vibration characteristics of strip mill under additional dynamic bending moment of universal joint shaft. JOURNAL OF VIBRATION AND SHOCK, 2022, 41(19): 48-54.
[1] 刘浩然，侯东晓，时培明等.轧机辊系滞后非线 性垂直振动系统的振动特性[J].机械工程学报,2011,47(13):65-71.
LIU Haoran, HOU Hongxiao, SHI Peiming, et al. Vibration Characteristics of Hysteretic Nonlinear Vertical Vibation System of Rolling Mill Roller[J].Journal of Mechanical Engineering, 2011, 47(13): 65-71.
[2] 刘飞，刘彬，时培明等. 液压缸非线性约束下的轧机辊系振动行为[J].机械工程学报,2014,50(24):59-65.
LIU fei, LIU bin, SHI Peiming, et al. Vibration Behavior of Roll System under Nonlinear Constraints of the Hydraulic Cylinder[J]. Journal of Mechanical Engineering, 2014, 50(24): 59-65.
[3] 高崇一，杜国君，张忠健.考虑多间隙影响的轧机主传动系统 扭振分析[J].机械工程学报,2014,50(03):130-136.
GAO Chongyi, DU Guojun, ZHANG Zhongjian. Torsional Vibration Analysis of the Main Drive System of a Rolling Mill with Impact of Multi-clearance[J]. Journal of Mechanical Engineering, 2014, 50(03): 130-136.
[4] Heidari,A;Forouzan,MR;Akbarzadeh,S.Development of a Rolling Chatter Model Considering Unsteady Lubrication. 2014, 54(1): 165-170.
[5] Zeng LQ, Zang Y, Gao ZY. Hopf bifurcation control for rolling mill multiple-mode-coupling vibration under nonlinear friction, Journal of Vibration and Acoustics[J]. 2017, 139(6): 061015.
[6] 刘彬，姜甲浩，刘飞等.受轧件水平振动影响的板带轧机非线性振动特性[J].中国机械工程,2016,27(18):2513-2520.
LIU Bin, JIANG Jiahao, LIU Fei, et al. Nonlinear Vibration Characteristics of Strip Mill Influenced by Horizontal Vibration of Rolled Piece[J]. Chinese Journal of Mechanical Engineering.2016, 27(18): 2513-2520.
[7] 纪志强. 厚板轧机附加弯矩和轧机刚度与轧制力偏差关系研究[D].秦皇岛：燕山大学,2015.
JI Zhi-qiang. Study Of Relationship Between P late Mill Additional Bending Or Stiffness And Rolling Force Variation [D]. Qinhuangdao:Yanshan University.2015.
[8] 王辉，凌启辉，周杰等.万向轴倾角对热连轧机振动的影响研究[J].冶金设备,2014(02):14-18.
WANG hui, LING qi-hui, ZHOU Jie, et al. Impact Study of the Hot Continuous Rolling Millbration on Universal Shaft Inclination Angle[J]. Journal of Metallurgical Equipment, 2014(02): 14-18.
[9] Shi PM, Li JZ, Jiang JS, et al. Nonlinear Dynamics of Torsional Vibration for Rolling Mill's Main Drive System Under Parametric Excitation[J]. Journal of Iron and Steel Research(International), 2013, 20(1):7-12.
[10] 时培明，夏克伟，刘彬等.多自由度轧机传动系统非线性非主共振扭振特性[J].振动与冲击,2015,34(12):35-41.
SHI Peiming, XIA Kewei, LIU Bin, et al. Non-main resonance characteristics of nonlinear multi-degree-of-freedom main drive system[J]. Journal of Vibration and shock, 2015, 34(12): 35-41.
[11] 闫晓强，刘丽娜，史灿等. CSP轧机弯扭耦合振动频率研究[J]. 振动与冲击，2009，28(03)：182-185.
YAN Xiaoqiang, LIU Lina, SHI Chan, et al. Study on bending-torsion coupling vibration frequency of CSP mil[J]. Journal of Vibration and Shock. 2009, 28(03): 182-185.
[12] George H,Martin. Kinematics and Dynamics of Machines [M], New York: McGraw-Hill, 1969.
[13] 侯东晓，郭大武，陈小辉.基于动态轧制力的四辊轧机垂直-扭转耦合非线性振动特性研究[J].振动与冲击,2020,39(20):106-112.
HOU Dongxiao，GUO Dawu, CHEN Xiaohui. A study on vertical-torsional coupled nonlinear vibration characteristics of 4-h rolling mill based on dynamic rolling force[J].Journal of Vibration and Shock, 2020,39(20):106-112.
