Abstract：Ultrasonic assisted magnetic abrasive finishing technology adds ultrasonic vibration function on the basis of magnetic abrasive finishing, which can polish the surface to nano level in a short time . Because it has the advantages of good auxiliary grinding effect, good controllability and applicability, it has been applied in more and more fields. Firstly, the development of ultrasonic assisted magnetic abrasive finishing technology is briefly introduced, which is mainly analyzed and summarized from the aspects of surface roughness, material removal rate, microstructure and residual stress. Secondly, ultrasonic vibration process parameters are important factors affecting the grinding result. Optimizing the process parameters such as amplitude, vibration frequency, spindle speed and abrasive particle size can significantly improve the grinding effect. In addition, the appropriate machining time and machining clearance should be considered to accurately grind the complex surface. Finally, some defects in the research of ultrasonic vibration assisted magnetic abrasive finishing technology are put forward, and its future development trend is prospected.
舒坤，孙岩，陈燕. 超声振动辅助磁粒研磨技术的研究进展[J]. 振动与冲击, 2023, 42(6): 39-54.
SHU Kun，SUN Yan，CHEN Yan. Review of research progress on ultrasonic assisted magnetic abrasive finishing technology. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(6): 39-54.
[1] 张能, 魏昕, 谢小柱, 等. 超声加工技术的研究进展及其发展趋势 [J]. 机械设计与制造, 2018, (4): 266-268+272.
ZHANG Neng, WEI Xin, Xie Xiaozhu, et al. Research Progress and Development Trends of the Ultrasonic Machining Technology [J]. Machinery Design & Manufacture, 2018, (4): 266-268+272.
[2] 刘文浩, 陈燕, 李文龙, 等. 磁粒研磨加工技术的研究进展
[J]. 表面技术, 2021, 50(1): 47-61.
LIU Wenhao, CHEN Yan, Li Wenlong, et al. Research Progress of Magnetic Abrasive Finishing Technology [J]. Surface Technology, 2021, 50(1): 47-61.
[3] 郭龙文, 杨能阁, 陈燕. 磁粒研磨工艺对整体叶盘表面完整性的影响 [J]. 中国表面工程, 2013, 26(3): 10-14.
GUO Longwen, YAN Nengge, CHEN Yan.. Influence of Magnetic Abrasive Finishing Technology on Surface Integrity of Vane-integrated Disk [J]. China Surface Engineering, 2013, 26(3): 10-14.
[4] 荣烈润. 超精密研磨抛光方法 [J]. 航空精密制造技术, 2005, (2): 4-8.
RONG Lierun. Introduction to Ultraprecision Grinding Polishing Method [J]. Aviation Precision Manufacturing Technology, 2005, (2): 4-8.
[5] 袁巨龙, 张飞虎, 戴一帆, 等.超精密加工领域科学技术发展研究 [J]. 机械工程学报, 2010, 46(15): 161-177.
YUAN Julong, ZHANG Feihu, DAI Yifan, et al. Development Research of Science and Technologies in Ultra-precision Machining Field [J]. Journal of Mechanical Engineering, 2010, 46(15): 161-177.
[6] 房善想, 赵慧玲, 张勤俭. 超声加工技术的应用现状及其发
展趋势 [J]. 机械工程学报, 2017, 53(19): 22-32.
FAGN Shanxiang, ZHAO Huiling, ZHANG Qinjian. The Application Status and Development Trends of Ultrasonic Machining Technology [J]. Journal of Mechanical Engineering, 2017, 53(19): 22-32.
[7] Vipin C. Shukla, Pulak M. Pandey. Experimental investigations into sintering of magnetic abrasive powder for ultrasonic assisted magnetic abrasive finishing process [J]. Materials and Manufacturing Processes, 2017, 32(1): 108-114.
[8] 朱子俊, 韩冰, 陈燕, 等. 复合磁极磁粒研磨平面机理及试验探究 [J]. 表面技术, 2021, 50(9): 352-360.
ZHU Zijun, HAN Bin, CHEN Yan, et al. Mechanism Analysis and Experimental Study of Plane of Compound Magnetic Pole Magnetic Abrasive Lapping [J]. Surface technology, 2021, 50(9): 352-360.
[9] Z. Q. Liu, Y. Chen, Y. J. Li, et al. Comprehensive performance evaluation of the magnetic abrasive particles [J]. The International Journal of Advanced Manufacturing Technology, 2013, 68(1-4):631-640.
[10] 陈燕, 宋宗朋, 李昌, 等.磁研磨法抛光40Cr钢管件内表面的影响因素 [J].中国表面工程, 2015, 28(4): 62-69.
CHEN Yan, SONG Zongming, LI Chang, et al. Influencing Factors on Polishing lnner Surface of 40Cr Steel Pipe Fittings with a Magnetic Grinding Method [J]. China Surface Engineering, 2015, 28(4): 62-69.
[11] 马付建, 陶德松, 宫臣, 等. 难加工合金材料复杂曲面磁性磨料光整加工技术 [J].河北科技大学学报, 2016, 37(5): 449-456.
MA Fujian, TAO Desong, GONG Chen, et al. Technology of Magnetic Abrasive Finishing in Machining of difficult-to machine alloy complex surface [J]. Journal of Hebei University of Science and Technology, 2016, 37(5): 449-456.
[12] K. Zhou, Y. Chen,Z. W. Du, et al. Surface integrity of titanium part by ultrasonic magnetic abrasive finishing [J]. The International Journal of Advanced Manufacturing Technology, 2015, 80(5-8): 997-1005.
[13] 董延军. 超声辅助磁力研磨实验研究 [J]. 工具技术, 2016, 50(8): 3.
DONG Yanjun. Experimental Study of Ultrasonic Assisted Magnetic Abrasive Finishing [J]. Tool Engineering, 2016, 50(8): 3.
[14] Aviral Misra, Pulak M. Pandey, U. S. Dixit , et al. Multi-objective optimization of ultrasonic-assisted magnetic abrasive finishing process [J]. The International Journal of Advanced Manufacturing Technology, 2019, 101(5): 1661-1670.
[15] 康璐, 陈燕, 赵杨, 等. 超声振动辅助磁粒研磨协同增效机制与试验研究 [J]. 航空制造技术, 2018, 61(21): 57-62+68.
KANG Lu, CHEN Yan, ZHAO Yang. Synergistic Mechanism and Experimental Study of Ultrasonic Vibration Assisted Magnetic Grinding [J]. Aeronautical Manufacturing Technology, 2018, 61(21): 57-62+68.
[16] 王艳. 振动在磁性磨料磁粒研磨中的应用 [J].华东船舶工业学院学报, 2000, 14(01): 83-87.
WANG Yan. Application of Vibration Lapping to Magnetic Abrasive Finishing [J]. Journal of East China Shipbuilding Institute, 2000, 14(01): 83-87.
[17] 曾加恒. 超声辅助磁力研磨镍基合金试验研究 [D]. 鞍山:
辽宁科技大学, 2019.
ZENG Jiaheng. Experimental study on Nickel-based Composite byultrasonic assisted magnetic abrasion [D]. An shan: University of Science and Technology Liaoning, 2019.
[18] 陈燕, 刘昭前, 王显康. 超声波振动辅助磁粒研磨加工研究 [J]. 农业机械学报, 2013, 44(10): 294-298+293.
CHEN Yan, LIU Zhaoqian, WANG Xiankang. Ultrasonic Vibration-assisted Magnetic Abrasive Finishing [J]. Transactions of the Chinese Society for Agricultural Machinery, 2013, 44(10): 294-298+293.
[19] 刘海山. 磁力研磨技术的研究与应用 [D]. 淄博: 山东理工大学, 2008.
LIU Haishan. Research and application of magnetic grinding technology [D]. Zibo: Shandong University of technology, 2008.
[20] 朱旭, 陈宏堃, 陈剑彬, 等. 旋转超声磨削加工技术研究进展 [J]. 电加工与模具, 2018, (S1): 9-14.
ZHU Xu, CHEN Hongkun, CHEN Jianbin, et al. Development and Application Potential of Ultrasonic Machining [J].
Electromachining & Mould, 2018 (S1): 9-14.
[21] Mulik R S. Experimental investigations and analysis of ultrasonic assisted magnetic abrasive finishing process [D]. Indian institute of technology Delhi, 2011.
[22] CHEN H F, TANG J Y,Wen SHAO W, et al. An investigation on surface functional parameters in ultrasonic assisted grinding of soft steel [J]. The International Journal of Advanced Manufacturing Technology, 2018, 97(5-8): 2697–2702.
[23] Yusuf S. Dambatta, Ahmed A. D. Sarhan, M. Sayuti, et al. Ultrasonic assisted grinding of advanced materials for biomedical and aerospace applications - a review [J]. The International Journal of Advanced Manufacturing Technology, 2017, 92(9-12): 3825–3858.
[24] 秦璞. 雾化法制备CBN/铁基球形复合磁性磨粒形成机制及微结构分析 [D]. 淄博: 山东理工大学, 2019.
QIN Pu. Formation Mechanism and Microstructure Analysis of SBN/Fe-based Spherical Compositic Abrasive Prepared by Gas Atomization [D]. Zibo: Shandong University of Technology, 2019.
[25] 肖强, 李言, 李淑娟. 超声复合研磨光学玻璃机理及表面特征 [J]. 宇航材料工艺, 2011, 41(4): 89-90.
XIAO Qiang, LI Yan, LI Shujuan. Machining Mechanism and Influence of Ultrasonic Lapping on Surface Characteristic of Optical Glass [J]. Aerospace Materials & Technology, 2011, 41(4): 89-90.
[26] 芦亚萍, 张军强, 马季, 等. 模具自由曲面的超声磁粒复合研磨研究 [J]. 电加工与模具, 2007, (3): 59-62.
LU Yaping, ZHANG Junqiang, MA Ji, et al. The Study on Ultrasonic Magnetic Abrasive Finishing （UMAF） Control System [J]. Electromachining & Mould, 2007, (3): 59-62.
[27] 马付建, 姜天优, 刘宇, 等. 钛合金曲面超声辅助磁性磨料光整加工材料去除规律及去除函数 [J]. 表面技术, 2020, 49(3): 290-299.
MA Fujian, JIANG Tianyou, LIU Yu, et al. Material Removal Rule and Removal Function for Ultrasonic Assisted Magnetic Abrasive Finishing of Titanium Alloy Curved Surface [J]. Surface Technology, 2020, 49(3): 290-299.
[28] ZHANG G X, ZHAO Y G, ZHAO D B, et al. New Iron-based SiC Spherical Composite Magnetic Abrasive for Magnetic Abrasive Finishing [J]. Chinese Journal of Mechanical Engineering, 2013, 26(2): 377-383.
[29] A. Cheng Wang, L. Tsai, C. H. Liu, K. Z. Liang,S. J. Lee. Elucidating the Optimal Parameters in Magnetic Finishing with Gel Abrasive [J]. Materials and Manufacturing Processes, 2011, 26(5): 786-791.
[30] Jinzhong Wu,Yanhua Zou,Hitoshi Sugiyama. Study on finishing characteristics of magnetic abrasive finishing process using low-frequency alternating magnetic field [J]. The International Journal of Advanced Manufacturing Technology, 2016, 85(1-4): 1-10.
[31] 李长河, 孙奕澎, 蔡光起. 自由磨粒复杂曲面磁力研磨光整加工试验研究 [J].制造技术与机床, 2005, (5): 72-75.
LI Changhe, SUN Yipeng, CAI Guangqi. Experimental Research on Magnetic Abrasive Finishing Machining on Complicated Surface [J]. Manufacturing Technology & Machine Tool, 2005, (5): 72-75.
[32] Misra A, Pandey P M, Dixit U S, et al. Modeling of finishing force and torque in ultrasonic-assisted magnetic abrasive finishing process [J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2019, 233(2): 411–425.
[33] Mulik R S, Pandey P M. Experimental Investigations and Modeling of Finishing Force and Torque in Ultrasonic Assisted Magnetic Abrasive Finishing [J]. Journal of Manufacturing Science and Engineering, 2012, 134(5): 051008.
[34] Mulik R S,Srivastava V, Pandey P M. Experimental Investigations and Modeling of Temperature in the Work-Brush Interface during Ultrasonic Assisted Magnetic Abrasive Finishing Process [J]. Materials and Manufacturing Processes, 2012, 27(1): 1-9.
[35] Mulik R S, Pandey P M. Mechanism of Surface Finishing in Ultrasonic-Assisted Magnetic Abrasive Finishing Process [J]. Materials and Manufacturing Processes, 2010, 25(12): 1418-1427.
[36] Misra A, Pandey P M, Dixit U. S. Modeling of material removal in ultrasonic assisted magnetic abrasive finishing process [J]. International Journal of Mechanical Sciences, 2017,131-132: 853-867.
[37] Misra A, Pandey P M, Dixit U. S. Dixit. Modeling and simulation of surface roughness in ultrasonic assisted magnetic abrasive finishing process [J]. International Journal of Mechanical Sciences, 2017, 133: 344-356.
[38] Farwaha H S, Deepak D, Brar G S. Mathematical modeling and process parameters optimization of ultrasonic assisted electrochemical magnetic abrasive machining [J]. Journal of Mechanical Science and Technology, 2020, 34(12): 5063-5073.
[39] Kala P, Kumar S, Pandey P M. Polishing of Copper Alloy Using Double Disk Ultrasonic Assisted Magnetic Abrasive Polishing [J]. Materials and Manufacturing Processes, 2013, 28(2): 200-206.
[40] Farwaha H S, Deepak D, Brar G S. Design and performance of ultrasonic assisted magnetic abrasive finishing combined with electrolytic process set up for machining and finishing of 316L stainless steel [J]. Materials Today: Proceedings, 2020, 33(3): 1626-1631.
[41] Nitesh S, Kala P, Pandey P M. Analysis of Surface Finish Improvement during Ultrasonic Assisted Magnetic Abrasive Finishing on Chemically treated Tungsten Substrate [J]. Procedia Manufacturing, 2017, 10: 136-146.
[42] Yamamoto C, Nakada I, Kuboi T, et al. Development of magnetic field assisted ultrasonic vibration finishing process and its apparatus [J]. Journal of the Japan Society for Abrasive Technology, 2004, 48: 41-46.
[43] Amineh S K, Tehrani A F, Mosaddegh P, et al. A Comprehensive Experimental Study on Finishing Aluminum Tube by Proposed UAMAF Process [J]. Materials and Manufacturing Processes, 2015, 30(1): 93-98.
[44] S.Yin, T. Shinmura. Vertical vibration-assisted magnetic abrasive finishing and deburring formagnesium alloy [J]. International Journal of Machine Tools and Manufacture, 2004, 44: 1297–1303.
[45] 芦亚萍, 马季, 张军强, 等. 超声磁粒复合研磨技术 [J]. 煤炭学报, 2007, (5): 552-556.
LU Yaping, MA Ji, ZHANG Junqiang, et al. Ultrasonic magnetic abrasive finishing technology [J]. 2007, (5): 552-556.
[46] 吕正兵, 徐家文. 工程陶瓷超声加工的基础试验研究 [J]. 电加工与模具, 2004, (2): 57-58.
LV Zhengbin, XU Jiawen. The basic experimental studies on ultrasonic machining engineering ceramics [J]. Electromachining & Mould, 2004, (2): 57-58.
[47] 吴雁, 孙爱国, 赵波, 等. 超声振动磨削陶瓷材料高效去除机理研究 [J]. 机械制造技术与机床, 2006, (4): 1-2.
WU Yan, SUN Aiguo, ZHAO Bo. Study on the Mechanism of Material Removal of Ultrasonic Vibration Grinding of Ceramic [J]. Manufacturing Technology & Machine Tool, 2006, (4): 1-2.
[48] 陶德松. 钛合金超声辅助磁性磨料光整加工切削力与材料去除规律研究 [D]. 大连: 大连交通大学, 2018.
TAO Desong. Study on cutting force and material removal
laws of titanium alloy by ultrasonic assisted magnetic abrasive finishing [D]. Dalian: Dalian Jiaotong University, 2018.
[49] 刘冬冬, 韩冰, 陈燕, 等. 超声磁粒研磨Al6061管内表面光整试验研究 [J]. 电镀与精饰, 2019, 41(12): 14-19.
LIU Dongdong, HAN Bing, CHEN Yan, et al. Research on Application of Magnetic Abrasive Particle Aided Magnetic Needles Grinding [J]. Plating and Finishing, 2019, 41(12): 14-19.
[50] 刘顺, 韩冰, 陈燕, 等.超声磁粒复合研磨对石英玻璃管内表面的光整研究 [J]. 表面技术, 2018, 47(06): 265-270.
LIU Shun, HAN Bing, CHEN Yan, et al. Inner Surface Finishing of Quartz Glass Tube by Ultrasonic Magnetic Particle Composite Grinding [J]. Surface Technology, 2018, 47(06): 265-270.
[51] 朱子俊, 韩冰, 李奎, 等. 超声辅助磁粒研磨TC4平面的光整试验研究 [J]. 电镀与精饰, 2020, 42(10): 6-11.
ZHU Zijun, HAN Bing, LI Kui, et al. Experimental Study on Ultrasonic-Assisted Magnetic Particle Grinding of TC4 Plane [J]. Plating and Finishing, 2020, 42(10): 6-11.
[52] 马付建, 栾诗宇, 罗奇超, 等. 超声辅助磁性磨料光整加工工艺对钛合金表面完整性的影响 [J]. 中国表面工程, 2019, 32(2): 128-136.
MA Fujian, LUAN Shiyu, LUO Qichao, et al. Effects of Ultrasonic Assisted Magnetic Abrasive Finishing on Surface Integrity of Titanium Alloy [J]. China Surface Engineering, 2019, 32(2): 128-136.
[53] 朱子俊, 刘顺, 韩冰, 等. 超声振动复合研磨K9光学玻璃工艺研究 [J]. 表面技术, 2020, 49(4): 74-80.
ZHU Zijun, LIU Shun, HAN Bing, et al. Study on Hybrid Technology of Ultrasonic Vibration Assisted Abrasive Lapping K9 Optical Glass [J]. Surface Technology, 2020, 49(4): 74-80.
[54] 张德琪, 沈景凤, 陈俊豪. 基于超声振动加工变幅杆的优化设计 [J]. 农业装备与车辆工程, 2021,59(10): 131-134.
ZHANG Deqi, SHEN Jingfeng, CHEN Junhao. Optimal Design of Horn Based on Ultrasonic Vibration Processing [J]. Agricultural Equipment & Vehicle Engineering, 2021,59(10): 131-134.
[55] 张卫锋, 刘致君, 张灿祥, 等. 旋转超声加工的研究现状及发展趋势 [J].机械制造与自动化,2021,50(3):1-4+19.
ZHANG Weifeng, LIU Zhijun, ZHANG Canxiang, et al. Research Status and Development Trend of Rotary Ultrasonic Machining [J]. Machine Building & Automation, 2021, 50(3): 1-4+19.
[56] 张巧丽, 张建富, 冯平法, 等. 斜槽式超声变幅杆纵扭特性研究 [J]. 振动与冲击, 2019, 38(10): 58-64+78.
ZHANG Qiaoli, ZHANG Jianfu, Feng Pingfa, et al. Characteristics of the longitudinal-torsional vibration of an ultrasonic horn with slanting slots [J]. Journal of Vibration and Shock, 2019, 38(10): 58-64+78.
[57] 焦安源, 张龙龙,刘新龙, 等. 磁粒研磨去除Al 7075交叉孔棱边毛刺的试验研究 [J]. 表面技术, 2019, 48(4): 302-309.
JIAO Anyuan, ZHANG Longlong, LIU Xinlong, et al. Expermantal Study of Deburring in Al 7075 Cross Hole Edge Based on Magnetic Particles Grinding [J]. Surface Technology, 2019, 48(4): 302-309.
[58] 韩冰, 邓超, 陈燕. 球形磁铁在弯管内表面磁力研磨中的应用 [J]. 摩擦学学报, 2013, 33(6): 565-570.
HAN Bin, DENG Chao, CHEN Yan. The Spherical Magnet Processing of lnner Surface of Bending Pipe by Magnetic Abrasive Finishing. Tribology, 2013, 33(6): 565-570.
[59] 王金龙, 陈燕, 张泽群, 等. 瓦形磁极对磁粒研磨加工管件内表面的影响 [J]. 表面技术, 2022: 1-11.
WANG Jinlong, CHEN Yan, ZHANG Zequn, et al. Influence of Tile Type Magnetic Pole on lnner Surface of Magnetic Abrasive Finishing Grinding Pipe Fittings [J]. Surface Technology, 2022:1-11.
[60] Jiang T Y, Ma F J, Liu X, et al. Technological Rule of Ultrasonic Assisted Magnetic Abrasive Finishing of Titanium Alloy [J]. IOP Conference Series: Materials Science and Engineering, 2019, 616.
[61] 马季. 模具自由曲面超声磁力复合研磨机理及试验研究[D]. 长春: 吉林大学, 2007.
MA Ji. Research on Surface Quality of Ultrasonic Compositing Magnetic Grinding Ceramic Cylinder [D]. Changchun: Jilin University, 2007.
[62] 刘鑫. 钛合金超声辅助磁性磨料光整加工工艺研究 [D]. 大连: 大连交通大学, 2018.
LIU Xin. Research on Process of Ultrasonic Assisted Magnetic Abrasive Finishing of Titanium Alloy [D]. Dalian: Dalian Jiaotong University, 2018.
[63] 耿其东, 李春燕. 超声磁粒研磨加工参数对蓝宝石表面粗糙度的影响 [J]. 表面技术, 2018, 47(7): 104-111.
GENG Qidong, LI Chunyan. Influence of Ultrasonic Polishing and Magnetic Abrasive Finishing Processing Parameters on Surface Roughness of Sapphire [J]. Surface Technology, 2018, 47(7): 104-111.
[64] 芦亚萍, 张军强, 马季, 等. 超声磁粒复合研磨加工工艺参数控制系统设计 [J]. 农业机械学报, 2007, (8): 168-172.
LU Yaping, ZHANG Junqiang, MA Ji, et al. Study on the Control of Ultrasonic Magnetic Abrasive Finishing [J]. Transactions of the Chinese Society for Agricultural Machinery, 2007, (8): 168-172.
[65] 肖强. 超声研磨SiC单晶材料去除率与表面特征研究 [J].人工晶体学报, 2011, 40(2): 496-499.
XIAO Qiamg. Research on the Material Removal rates and Surface Features of SiC Single Crystal by Ultrasonic Polishing [J]. Journal of Synthetic Crystals, 2011, 40(2): 496-499.
[66] 高全香. 外圆超声振动研磨Al2O3陶瓷的去除率研究 [J].
现代制造工程, 2004, (1): 54-56.
GAO Quanxiang. Research on material removal rate in ultrasonic vibration cylindrical lapping Al2O3 ceramics [J]. Modern Manufacturing Engineering, 2004, (1): 54-56.
[67] 铁瑛, 赵波, 张波. 超声振动研磨外圆类陶瓷工件去除率研究 [J]. 金刚石与磨料磨具工程, 2003, (2): 28-29+69.
TIE Ying, ZHAO Bo, ZHANG Bo. Study on the Removel rate of Cylindrical Ceramic Workpieces by Ultrasonic Vibration Lapping [J]. Diamond & Abrasives Engineering, 2003, (2): 28-29+69.
[68] Nitesh Sihag, Prateek Kala, Pulak M. Pandey. Experimental investigations of chemo-ultrasonic assisted magnetic abrasive finishing process [J]. International Journal of Precision Technology, 2015, 5(3/4): 246-260.
[69] Farwaha H S, Dharmpal D, Singh B G. Process Parameter Optimization of Ultrasonic Assisted Electrochemical Magnetic Abrasive Finishing of 316L Stainless Steel [J]. Journal of Physics: Conference Series, 2019, 1240: 18-22.
[70] Kala P, Pandey P M. Experimental investigations into ultrasonic-assisted double-disk magnetic abrasive finishing of two paramagnetic materials [J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2017, 231(6): 1021-1038.
[71] 张成光, 缪娟, 刘传绍, 等. 超声振动研磨加工模型理论研究 [J]. 煤矿机械, 2007, (2): 96-97.
ZHANG Chengguang, MIAO Juan, LIU Chuanshao, et al. Theoretic Study of Model Based on Ultrasonic Abrasive Hardness-brittle Materials [J]. Coal Mine Machinery, 2007, (2): 96-97.
[72] 王岩. 超声磁粒研磨工程陶瓷去除机理研究 [D]. 焦作, 河南理工大学, 2015.
WANG Yan. Research on ultrasonic assisted magnetic abrasive finishing of engieering ceramics [D]. Jiaozuo, Henan Polytechnic University, 2015.
[73] 张栋梁. 沟槽表面超声辅助磁性研磨光整加工装置设计及实验 [D]. 太原: 太原理工大学, 2021.
ZHANG Dongliang. Design and Experimental Research of Ultrasonic-Assisted Magnetic Grinding and Finishing Equipment for Groove Surface [D]. Taiyuan: Taiyuan University of Technology, 2021.
[74] 孙岩. 法向超声波振动辅助磁粒研磨加工试验研究 [C]. 2016年中国（国际）光整加工技术及表面工程学术会议暨2016年中国光整加工技术产学研协调发展论坛.鞍山：中国机械工程学会, 2016.
SUN Yan. Experimental study on normal ultrasonic vibration assisted magnetic abrasive machining [C]. China Society of Mechanical Engineering, 2016.
[75] H. Yun, B. Han, Y. Chen, et al. Internal finishing process of alumina ceramic tubes by ultrasonic-assisted magnetic abrasive finishing [J]. The International Journal of Advanced Manufacturing Technology, 2016, 85(1-4).
[76] 杨海吉, 邓祥伟, 韩冰, 等. 超声波辅助磁粒研磨TC4薄壁细长管内表面研究 [J]. 组合机床与自动化加工技术, 2018, (2): 30-33.
YANG Haiji, DENG Xiangwei, HAN Bing, et al. Study on the Inner Surface of TC4 Thin-walled Tube by Ultrasonic Vibration Assisted MAF [J]. Modular Machine Tool & Automatic Manufacturing Technique, 2018, (2): 30-33.
[77] 栾诗宇. 钛合金超声辅助磁性磨料光整加工超声作用机理研究 [D]. 大连: 大连交通大学, 2018.
LUAN Shiyu. Research on Ultrasonic Mechanism for Ultrasonic Assisted Magnetic Abrasive Finishing of Titanium Alloy [D]. Dalian: Dalian Jiaotong University, 2018.
[78] 焦龙飞. 超声复合磁粒研磨工程陶瓷外圆表面质量研究[D]. 焦作: 河南理工大学, 2016.
JIAO Longfei. Research on Surface Quality of Ultrasonic Compositing Magnetic Grinding Ceramic Cylinder [D]. Jiaozuo: Henan Polytechnic University, 2018.
[79] 张洪丽, 张建华. 超声振动辅助磨削脆性材料去除机理 [J]. 重庆大学学报, 2010, 33(10): 32-36.
ZHANG Hongli, ZHANG Jianhua. Brittle material removal mechanism of ultrasonic vibration assisted grinding [J]. Journal of Chongqing University, 2010, 33(10): 32-36.
[80] 韩冰, 云昊, 陈燕, 等. 振动辅助磁粒研磨超硬精密Al2O3陶瓷管内表面试验研究 [J]. 摩擦学学报, 2016, 36(2): 169-176.
HAN Bing, YUN Hao, CHEN Yan, et al. Experimental Study of Vibration-assisted Magnetic Abrasive Finishing on Inner Surface of Superhard Precise Al2O3 Ceramic Tubes [J]. Tribology, 2016, 36(2): 169-176.
[81] 陈燕, 曾加恒, 钱之坤, 等. 超声复合磁粒研磨异型管参数优化设计及分析 [J]. 表面技术, 2019, 48(3): 268-274.
CHEN Yan, ZENG Jiaheng, QIAN Zhikun, et al. Parameter Optimization Design and Analysis of Ultrasonic Composite Magnetic Abrasive Finishing [J]. Surface Technology, 2019, 48(3): 268-274.
[82] 曾加恒, 陈燕, 张科丙, 等. 旋转超声辅助磁粒研磨镍基合金参数优化设计及分析 [J]. 表面技术, 2018, 47(11): 274-280.
ZENG Jiaheng, CHEN Yan, ZHANG Kebing, et al. Optimization Design and Analysis of Ni Based Alloy by Rotating Ultrasonic Assisted Magnetic Abrasive Finishing [J]. Surface Technology, 2018, 47(11): 274-280.
[83] 陈燕, 曾加恒, 胡玉刚, 等. 超声复合磁粒研磨加工镍基合金GH4169异形管 [J]. 中国表面工程, 2018, 31(6): 118-124.
CHEN Yan, ZENG Jiaheng, HU Yugang, et al. Special-shaped Pipe of Nickel Based Alloy GH4169 by Ultrasonic Assisted Magnetic Abrasive Finishing [J]. China Surface Engineering, 2018, 31(6): 118-124.
[84] 曾加恒, 陈燕, 张科丙, 等. 旋转超声辅助磁粒研磨镍基合金试验研究 [J]. 硬质合金, 2018, 35(3): 180-185.
ZENG Jiaheng, CHEN Yan, ZHANG Kebing, et al. Experimental Research on Rotary Ultrasonic Assisted Magnetic Abrasive Finishing of Nickel Based Alloy [J]. Cemented Carbide, 2018, 35(3): 180-185.
[85] 谭悦, 陈燕, 曾加恒, 等. 超声磁力复合研磨对TA18管内表面光整加工 [J]. 电镀与涂饰, 2017, 36(16): 870-873.
TAN Yue, CHEN Yan, ZENG Jiaheng, et al. Finishing machining of inner surface of TA18 pipe by ultrasonic–magnetic composite grinding [J]. Electroplating & Finishing, 2017, 36(16): 870-873.
[86] 刘新龙, 陈燕, 张国富, 等.电解-旋转超声磁粒复合对TC4板抛光的研究 [J]. 电镀与精饰, 2019, 41(10): 13-16.
LIU Xinlong, CHEN Yan, ZHANG Guofu, et al. Study on Polishing of Tc4 Plate by Electrolysis-Rotating Ultrasound Magnetic Particle Composite [J]. Electroplating & Finishing, 2019, 41(10): 13-16.
[87] 刘新龙, 陈燕, 王杰, 等. 电解-旋转超声复合磁粒研磨去除TC4钛合金孔边毛刺 [J]. 电镀与涂饰, 2019, 38(13): 680-684.
LIU Xinlong, CHEN Yan, WANG Jie, et al. Deburring of TC4 titanium alloy hole edge by magnetic grinding in combination with electrolysis and rotational ultrasonic vibration [J]. Electroplating & Finishing, 2019, 38(13): 680-684.
[88] Mulik R S, Pandey P M. Ultrasonic assisted magnetic abrasive finishing of hardened AISI 52100 steel using unbonded SiC abrasives [J]. International Journal of Refractory Metals & Hard Materials, 2011, 29(1): 68-77.
[89] Mulik R S, Pandey P M. Experimental investigations and optimization of ultrasonic assisted magnetic abrasive finishing process [J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2011, 225(8): 1347-1362.
[90] 焦安源, 全洪军, 陈燕, 等. 超声磁力复合研磨钛合金锥孔的试验研究 [J]. 机械工程学报, 2017, 53(19): 114-119.
JIAO Anyuan, QUAN Hongjun, CHEN Yan, et al. Experimental Research of Titanium Alloy Taper Hole by Ultrasonic Magnetic Abrasive Finishing [J]. Journal of Mechanical Engineering, 2017, 53(19): 114-1: 114-1
