斜盘式轴向柱塞泵壳体动态特性分析

摘要
图/表
参考文献(16)
相关文章 (15)

全文: PDF (1556 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要基于斜盘式轴向柱塞泵的几何参数、运动学参数和液压参数建立泵转子的动态平衡方程。求解动态平衡方程，并从泵转子和壳体之间的三大载荷传递路径入手，逐一确定滑靴、轴承和配流盘等运动部件对壳体的动态载荷。用运动部件对壳体的动态载荷等效它们之间的相互作用，从而实现壳体结构与运动部件的单向解耦。建立柱塞泵壳体有限元模型，采用实验模态分析验证模型的正确性。在壳体结构上施加不同工况下的动态载荷，计算壳体结构的动态响应，并用实验数据验证，进一步地，基于振动烈度评估壳体结构的振动大小。斜盘式轴向柱塞泵壳体动态特性分析为面向减振降噪的壳体结构优化设计奠定基础。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	宋华庆1
	王涛2
	汪浒江2
	唐守生2
	董兴建1

关键词 ：轴向柱塞泵, 壳体, 转子, 动态特性

Abstract：The dynamic equilibrium equation of the swash-plate axial piston pump was established based on its geometric, kinematic and hydraulic parameters. The dynamic equilibrium equation was solved, and from the three load transmission paths between the pump rotor and the housing, the dynamic loads of the slippers, bearings, valve-plate and other moving parts on the housing were determined one by one. The dynamic load of the moving parts on the housing was used to replace the interaction between them, so as to realize the unidirectional decoupling of the housing structure and moving parts. The finite element model of the piston pump housing was established, and the model was verified by experimental modal analysis. The dynamic loads were applied to the housing structure under different working conditions, then the dynamic response of the housing structure was calculated, and verified by the measured data. Then the vibration magnitude of housing structure based on vibration intensity was evaluated. Dynamic characteristic analysis of housing for swash-plate axial piston pump laid a foundation for its housing structural optimization design for vibration and noise reduction.

Key words： Axial piston pump Housing Rotor Dynamic characteristic

收稿日期: 2022-09-05 出版日期: 2023-08-28

引用本文:

宋华庆1，王涛2，汪浒江2，唐守生2，董兴建1. 斜盘式轴向柱塞泵壳体动态特性分析[J]. 振动与冲击, 2023, 42(16): 175-180.
SONG Huaqing1,WANG Tao2,WANG Hujiang2,TANG Shousheng2,DONG Xingjian1. Dynamic characteristic analysis of housing for a swash-plate axial piston pump. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(16): 175-180.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2023/V42/I16/175

[1]  周天悦，王存堂，顾建，等．恒压式径向柱塞泵定子的位移振动特性分析[J]，振动与冲击, 2009, 28(7):162-165
ZHOU T.Y., WANG C.T., GU J., et al. Displacement vibration analysis for stator of a constant-pressure radial piston pump[J], Journal of Vibration and Shock, 2009, 28(7):162-165
[2]  孙涛，罗凯，周华，等．燃料柱塞泵流动特性仿真分析与低噪声设计[J]，振动与冲击, 2017, 36(2):165-169, 189
SUN T., LUO K., ZHOU H., et al. Flow characteristics simulation and low-noise design of fuel piston pump[J], Journal of Vibration and Shock, 2017, 36(2):165-169, 189
[3]  顾振杰,白长青．柱塞泵压力脉动随机动力特性分析及实验研究[J]，振动与冲击, 2019, 38(16):188-191
GU Z.J., BAI C.Q.. Stochastic dynamic analysis and experimental study on pressure fluctuation of plunger pumps[J], Journal of Vibration and Shock, 2019, 38(16):188-191
[4]  张辉，刘红，张雷，等．航空柱塞泵流动特性数值计算方法研究[J]，计算机仿真, 2019, 36(10):79-82+259.
ZHANG H., LIU H., ZHANG L., et al. Investigation on Numerical Computational Methodology for the Flow Characteristics of Aviation Piston Pump[J]， Computer Simulation, 2019, 36(10):79-82+259.
[5]  Kumar S., Bergada J.M., Watton J.. Axial piston pump grooved slipper analysis by CFD simulation of three-dimensional NVS equation in cylindrical coordinates[J], Computers & Fluids, 2009, 38(3):648-663.
[6]  GUAN C.B., JIAO Z.X., He S.Z.. Theoretical study of flow ripple for an aviation axial-piston pump with damping holes in the valve plate[J], Chinese Journal of Aeronautics, 2014, 27(1):169-181.
[7]  徐兵,张军辉,杨华勇,等.基于串联式轴向柱塞泵转位角降噪方法仿真[J].浙江大学学报(工学版), 2013, 47(1):94-101.
XU B., ZHANG J.H., YANG H.Y., et al. Simulation on noise reduction of tandem axial piston pump utilizing indexing angle[J], Journal of Zhejiang University(Engineering Science), 2013, 47(1):94-101.
[8]  Palmen A. Noise reduction of an axial piston pump by means of structural modification[J], The Hydraulikund Pneumatik, 2004, 48(4): 1-11.
[9]  权凌霄,刘嵩,焦宗夏, 等.斜盘式轴向柱塞泵后壳体机械振动传递路径研究[J].振动工程学报, 2017, 30(4):587-595.
QUAN L.X., LIU S., JIAO Z.X., et al. Study on Transmission Path of Mechanical Vibration for Back Case of Swash Axial-Plate Piston Pump[J]. Journal of Vibration Engineering, 2017, 30(4):587-595.
[10] Manring N. D., Mehta V. S., Raab F. J., et al. The shaft torque of a tandem axial-piston pump[J]. Journal of Dynamic System, Measurement, and Control, 2007; 129(3): 367–371.
[11] Ye S, Zhang J, Xu B, et al. Theoretical investigation of the contributions of the excitation forces to the vibration of an axial piston pump[J]. Mechanical Systems and Signal Processing, 2019, 129: 201-217.
[12]  李壮云. 液压元件与系统 [M]. 机械工业出版社, 2011.
[13]  Harris T.A., Kotzalas M.N. Rolling Bearing Analysis - 2 Volume Set [M], 2006
[14]  万长森. 滚动轴承的分析方法 [M]，机械工业出版社, 1987.
[15]  刘光辉, 洪军, 孙岩辉, 等. 考虑滚子位置变化的圆柱滚子轴承非线性刚度特性分析 [J]，中国机械工程, 2020, 31(05): 505-12.
LIU G.H., HONG J., SUN Y.H., et al. Nonlinear Stiffness Characteristic Analysis of Cylindrical Roller Bearings Considering Variation of Roller Positions[J], China Mechanical Engineering, 2020, 31(5): 505-12.
[16]  严济宽. 机械振动隔离技术[M]，上海科学技术文献出版社, 1986.