Impact characteristics analysis of high-speed water jet against hull surface based on ALE algorithm
XIONG Ting1,2,3, KANG Ding2,3,4, FANG Zhenlong1,2,3
1.College of Transportation and Logistics Engineering, Wuhan University of Technology, Wuhan 430063, China;
2.Sanya Science and Education Innovation Park, Wuhan University of Technology, Sanya 572025, China;
3.National Engineering Research Center for Water Transport Safety, Wuhan University of Technology, Wuhan 430063, China;
4.College of Naval Architecture, Ocean and Energy Power Engineering, Wuhan University of Technology, Wuhan 430063, China
Abstract：In order to explore the damage effect of water jet cleaning on the hull surface, based on ALE algorithm, the impact pressure and stress characteristics of water jet impacting hull surface with different incidence angle θ and different flow velocity v were studied. The results show that with the increase of incidence angle θ, the impact pressure on the target will appear in the stages of water hammer pressure and stagnation pressure. The kinetic energy of high pressure water jet increases at the appropriate incident angle θ, but decreased when the incident Angle is too large (θ=20°). The stress distribution on the surface and interior of the target strengthened by shear effect at a certain incident angle θ is more complex than that under vertical impact, the parameter combination with the least influence on the hull surface material and the fitting formula between the maximum principal stress and the incident angle and velocity of the jet parameters are obtained. The research results have good theoretical significance and practical value for the application of water jet cleaning on hull surface.
熊庭1,2,3，康丁2,3,4，方珍龙1,2,3. 基于ALE算法的高速水射流对船体表面冲击特性研究[J]. 振动与冲击, 2023, 42(17): 17-24.
XIONG Ting1,2,3, KANG Ding2,3,4, FANG Zhenlong1,2,3. Impact characteristics analysis of high-speed water jet against hull surface based on ALE algorithm. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(17): 17-24.
[1] Townsin R L. The ship hull fouling penalty[J]. Biofouling, 2003, 19(S1): 9-15.
[2] Bax N, Williamson A, Aguero M, et al. Marine invasive alien species: a threat to global biodiversity[J]. Marine policy, 2003, 27(4): 313-323.
[3] Wilson D I, Köhler H, Cai L, et al. Cleaning of a model food soil from horizontal plates by a moving vertical water jet[J]. Chemical Engineering Science, 2015, 123: 450-459.
[4] Davidson I C, Mccann L D, Sytsma M D, et al. Interrupting a multi-species bioinvasion vector: the efficacy of in-water cleaning for removing biofouling on obsolete vessels[J]. Marine Pollution Bulletin, 2008, 56(9): 1538-1544.
[5] Armağan M. Cutting of St37 steel plates in stacked form with abrasive water jet[J]. Materials and Manufacturing Processes, 2021, 36(11): 1305-1313.
[6] 周正.基于磨料水射流的钛合金表面处理研究[D]. 西华大学, 2020.
ZHOU Zheng. Study on Titanium Alloy Surface Treatment Based on Abrasive Water Jet[D]. Xihua University,2020.
[7]葛兆龙,赵汉云,卢义玉,等.高压水射流冲击作用下煤-砂岩-页岩损伤破裂特征[J].振动与冲击,2021,40(13):174-181+209.
GE Zhao-long, ZHAO Han-yun, LU Yi-yu, et al. Damage and fracture characteristics of coal-sandstone-shale under high pressure water jet impact[J]. Journal of Vibration and Shock, 2021,40(13):174-181+209.
[8] 程书铭,曹宇鹏,陆华,等.超高压水射流冲蚀船用A级钢表面实验研究[J]. 表面技术, 2022, 51(06): 229-238.
CHENG Shu-ming, CAO Yu-peng, LU Hua, et al. Experimental Study on Surface Erosion of Grade-A Marine Steel by Ultra-high Pressure Water Jet[J]. Surface Technology, 2022, 51(06): 229-238.
[9] 胡东,唐川林,张凤华.脉冲气液射流冲蚀特性实验分析[J].振动与冲击,2013,32(11):141-144.
HU Dong, TANG Chuan-lin, ZHANG Feng-hua. Erosion characteristic of a pulsed air-water jet[J]. Journal of Vibration and Shock,2013,32(11):141-144.
[10] 刘佳亮,李坤元,张娣.高压水射流冲蚀混凝土破碎区演进特征及裂纹扩展规律研究[J].振动与冲击,2019,38(24):131-137.
LIU Jia-liang, LI Kun-yuan, ZHANG Di. Broken area evolution characteristics and crack propagation rules of concrete under high pressure water jet crushing[J]. Journal of Vibration and Shock, 2019,38(24):131-137.
[11] Lu Y Y, Huang F, Liu X C, et al. On the failure pattern of sandstone impacted by high-velocity water jet[J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2015, Vol.76: 67-74
[12] Srivastava M, Hloch S, Krejci L, et al. Residual stress and surface properties of stainless steel welded joints induced by ultrasonic pulsed water jet peening.[J].Measurement,2018,Vol.127: 453-462
[13] Hsu C Y, Liang C C, Teng T L, et al. A numerical study on high-speed water jet impact(Article)[J]. Ocean Engineering, 2013, Vol.72: 98-106
[14] Gong W J, Wang J M, Gao N. Numerical simulation for abrasive water jet machining based on ALE algorithm[J]. International Journal of Advanced Manufacturing Technology, 2011, Vol.53: 247-253
[15]黄璐云,陈正寿,倪路新,等.靶距与冲击角对超高压水射流喷嘴水动力学性能影响的研究[J]. 振动与冲击,2022,41(15): 169-178+223.
HUANG Lu-yun, CHEN Zheng-shou, NI Lu-xin, et al. Effects of target distance and impact angle on hydroaynamic performance of ultra-high pressure water jet nozzle[J]. Journal of Vibration and Shock, 2022,41(15):169-178+223.
[16] 司鹄,薛永志.基于SPH算法的脉冲射流破岩应力波效应数值分析[J].振动与冲击,2016,35(05):146-152.
SI Hu, XUE Yong-zhi. Numerical analysis for stress wave effects of rock broken under pulse jets[J]. Journal of Vibration and Shock,2016,35(05):146-152.
[17] 潘越,杨帆,张泽鹏,等.截断式脉冲水射流冲蚀煤岩特性数值模拟[J]. 振动与冲击,2021,40(06):283-288.
PAN Yue, YANG Fan, ZHANG Ze-peng, et al. Numerical simulation of coal rock fragmentation characteristics under interrupted pulse water jet[J]. Journal of Vibration and Shock,2021,40(06):283-288.
[18] Ren F S, Fang T C, Cheng X Z. Study on rock damage and failure depth under particle water-jet coupling impact.[J]. International Journal of Impact Engineering, 2020, Vol.139: 103504.
[19]曹源,金先龙,王建炜,等. T型管及管内流体动态响应仿真研究[J]. 振动与冲击,2010,29(04):54-58+230.
CAO Yuan, JIN Xian-long, WANG Jian-wei, et al. Numerical simmlation for dynamic response of a T-shape pipe and fluid inside[J]. Journal of Vibration and Shock, 2010,29(04):54-58+230.
[20] Mabrouki T, Raissi K, Cornier A. Numerical simulation and experimental study of the interaction between a pure high-velocity waterjet and targets: contribution to investigate the decoating process[J]. Wear, 2000, Vol.239(2): 260-273.
[21] Olovsson L, Aquelet N, Souli M. Lagrange coupling with damping effects:Application to slamming problems[J]. Computer Methods in Applied Mechanics and Engineering, 2006, Vol.195: 110-132.
[22] Hallguist J O. LS-DYNA theory manual[M]. Livermore: Livermore Software Technology Corporation, 2006: 155-161．
[23] David J B. Computational methods in Lagrangian and Eulerian hydrocodes[J]. Computer Methods in Applied Mechanics and Engineering, 1992, Vol.99: 235-394.
[24] 黄飞. 水射流冲击瞬态动力特性及破岩机理研究[D]. 重庆大学,2015.
HUANG Fei. On the Transient Dynamics of Water Jet Impinging Target and the Mechanism of Water Jet Breaking Rock[D]. Chongqing University,2015.
[25] 陈征,魏红祥,张玉峰,等. 动量、动能与牛顿的力—动力学的基础概念与图像[J].物理, 2022, 51(02):133-135.
CHEN Zheng, WEI Hong-xiang, ZHANG Yu-feng, et al. Momentum, Kinetic Energy, and Newtonian Forces—Basic Concepts and Images of Dynamics[J]. Physics,2022,51(02):133-135.
