基于AVMD-IMOMEDA的滚动轴承声信号复合故障特征分离提取

摘要
图/表
参考文献(17)
相关文章 (15)

全文: PDF (2392 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要针对滚动轴承声信号存在较强的背景噪声干扰，微弱故障特征信息难以有效提取等问题，并考虑到声信号非接触式测量的优势，本文提出一种参数自适应变分模式分解（AVMD）结合改进多点最优最小熵反褶积（improve multipoint optimal minimum entropy deconvolution adjusted,IMOMEDA）的复合故障声学诊断方法。采用综合指标（CI）解决变分模式分解（variational mode decomposition，VMD）参数自适应选择问题，利用最大加权峭度（WK）识别最优分量并重构信号，增强与故障特征相关的脉冲特征信息。结合IMOMEDA方法从重构信号中分离提取周期性的脉冲信号，通过包络解调获取故障特征频率。仿真信号和实验信号验证了该方法的有效性。与传统VMD、MOMEDA、VMD-MCKD（maximum correlation kurtosis deconvolution）方法进行比较，凸显了本文方法的优越性。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	周文杰1
	2
	周俊1
	2
	柳小勤1
	2
	刘韬1
	2

关键词 ：自适应变分模式分解, 改进多点最优最小熵反褶积, 加权峭度, 复合故障, 声学诊断

Abstract：Aiming at the problems of strong background noise interference of rolling bearing acoustic signals and difficulty in effectively extracting weak fault characteristic information, and considering the advantages of non-contact measurement of acoustic signals, this paper proposes a composite fault acoustic diagnosis method combining parameter adaptive variational mode decomposition (AVMD) combined with improved multi-point optimal minimum entropy deconvolution adjusted (IMOMEDA). The comprehensive index (CI) is used to solve the problem of adaptive selection of VMD parameters, and the maximum weighted kurtosis (WK) is used to identify the optimal component and reconstruct the signal, so as to enhance the pulse characteristic information related to the fault characteristics. Combined with the IMOMEDA method, the periodic pulse signal is extracted from the reconstruction signal, and the fault characteristic frequency is obtained through envelope demodulation. Simulation signals and experimental signals verify the effectiveness of the proposed method. Compared with the traditional VMD, MOMEDA, VMD-MCKD methods, the superiority of the proposed method is highlighted.

Key words： AVMD IMOMEDA weighted kurtosis composite fault acoustic diagnosis

收稿日期: 2023-01-03 出版日期: 2023-12-28

引用本文:

周文杰1,2，周俊1,2，柳小勤1,2，刘韬1,2. 基于AVMD-IMOMEDA的滚动轴承声信号复合故障特征分离提取[J]. 振动与冲击, 2023, 42(24): 152-159.
ZHOU Wenjie1,2，ZHOU Jun1,2，LIU Xiaoqin1,2，LIU Tao1,2. Separation and extraction of composite fault features of rolling bearing acoustic signals based on AVMD-IMOMEDA. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(24): 152-159.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2023/V42/I24/152

[1] ZHOU X Y，LI Y B，JIANG L，et al. Fault feature extraction for rolling bearings based on parameter adaptive variational mode decomposition and multi-point optimal minimum entropy deconvolution[J]. Measurement，2020，173：108469.
[2] 雷春丽，夏奔锋，薛林林，等. 基于MTF-CNN的滚动轴承故障诊断方法[J]. 振动与冲击，2022，41(9)：151-158.
LEI Chunli，Xia Benfeng，Xue Linlin，et al. Rolling bearing fault diagnosis method based on MTF-CNN [J]. Journal of Vibration and Shock，2022，41 (9)：151-158.
[3] 周俊，伍星，迟毅林，等. 盲解卷积和频域压缩感知在轴承复合故障声学诊断的应用[J]. 机械工程学报，2016，52(3)：63-70.
ZHOU Jun，WU Xing，CHI Yi，et al. Blind deconvolution and frequency domain compressive sensing application in bearing composite acoustic fault diagnosis [J]. Journal of Mechanical Engineering，2016，52 (3)：63-70.
[4] CAI W N，YANG Z J，WANG Z J，et al. A new compound fault feature extraction method based on multipoint kurtosis and variational mode decomposition [J]. Entropy，2018，20(7)：521.
[5] DRAGOMIRETSKIY K，ZOSSO D. Variational mode decomposition [J]. IEEE Transaction on Signal Processing，2014，62(3)：531-544.
[6] ZHANG X，MIAO Q，ZHANG H，et al. A parameter adaptive VMD method based on grasshopper optimization algorithm to analyze vibration signals from rotating machinery [J]. Mechanical Systems and Signal Processing，2018，108：58-72.
[7] YAN X，JIA M. Application of CSA-VMD and optimal scale morphological slice bispectrum in enhancing outer race fault detection of rolling element bearings [J]. Mechanical Systems and Signal Processing，2019，122：56-86.
[8] MIAO Y，ZHAO M，LIN J. Identification of mechanical compound fault based on the improved parameter adaptive variational mode decomposition [J]. ISA Trans，2019，84：82-95.
[9] MCDONALD G L，ZHAO Q. Multipoint optimal minimum entropy deconvolution and convolution fix：application to vibration fault detection [J]. Mechanical Systems and Signal Processing，2017，82：461-477．
[10] CAI W N，WANG Z J. Application of an improved multipoint optimal minimum entropy deconvolution adjusted for gearbox composite fault diagnosis [J]. Sensors，2018，18：2861.
[11] ZHAO L，ZHANG Y X，ZHU D C. Feature extraction for rolling element bearing weak fault based on MOMEDA and ICEEMDAN [J]. Journal of Vibroengineering，2018，20：2352–2362.
[12] LI Z R，MA J，WANG X D，et al. MVMD-MOMEDA-TEO model and Its application in feature extraction for rolling bearings [J]. Entropy，2019，21：331.
[13] 李华，伍星，刘韬，等. 基于信息熵优化变分模态分解的滚动轴承故障特征提取[J]. 振动与冲击，2018，37(23)：219-225.
LI Hua，WU Xing，LIU Tao，et al. Bearing fault feature extraction based on VMD optimization with information entropy [J]. Journal of Vibration and Shock，2018，37(23)：219-225.
[14] 李翠省，廖英英，刘永强. 基于EEMD和参数自适应VMD的高速列车轮对轴承故障诊断[J]. 振动与冲击，2022，41(1)：68-77.
LI Cuixing，LIAO Yingying，LIU Yongqiang. Fault diagnosis of wheelset bearing of high-speed train based on EEMD and parameter adaptive VMD [J]. Journal of vibration and shock，2022，41(1)：68-77.
[15] 谷然，陈捷，洪荣晶，等. 基于改进自适应变分模态分解的滚动轴承微弱故障诊断[J]. 振动与冲击，2020，39(8)：1-7.
GU Ran，CHEN Jie，HONG Rongjing，et al. Early fault diagnosis of rolling bearings based on adaptive variational mode decomposition and the teager energy operator [J]. Journal of Vibration and Shock，2020，39(8)：1-7.
[16] 王朝阁，李宏坤，胡少梁，等. 利用参数自适应多点最优最小熵反褶积的行星轮轴承微弱故障特征提取[J]. 振动工程学报，2021，34(3)：633-645.
WANG Chaoge，LI Hongkun，HU Shaoliang，et al. Weak fault feature extraction of planetary bearing based on parameter adaptive MOMEDA [J]. Journal of Vibration Engineering，2021，34(3)：633-645.
[17] 万书亭，张雄，豆龙江. 强噪源干扰下的滚动轴承复合故障分离方法研究[J]. 中南大学学报（自然科学版），2018，49(8)：1950-1959.
WAN Shuting，ZHANG Xiong，DOU Longjiang. Separation of composite rolling bearings fault features with strong noise interference [J]. Journal of Central South University(Science and Technology)，2018，49(8)：1950-1959.