非接触式直线型超声电机的振动分析
李向华;陈超;赵淳生
(南京航空航天大学精密驱动研究所,210016)
Vibration Studies of non-contact linear ultrasonic motor
Xianghua Li; Chao Chen ;Chunsheng Zhao
(Precision Driving Laboratory, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.)
摘要 非接触式超声电机装置具有结构简单、响应快的特点,因而可应用于航空航天和医疗仪器等领域.本文阐述了非接触式超声波传送装置的工作机理,对非接触直线型超声波电机的振动部份进行了分析,建立了从PZT元件受压激振到水平导轨传播纯弯曲行波的连续振动系统模型,获得了复杂边界条件下较为满意的理论结果.
关键词 :
传送装置 ,
非接触超声电机 ,
运动机理 ,
振动分析 ,
边界条件
Abstract :Of simplicity structure and rapid response, non-contact ultrasonic motor (Non-contact USM) series can be used in aeronautical, astronautical and medical fields. This paper firstly presents mechanism of Non-contact USM transporting apparatus, vibrations of each part are analyzed, the full vibration equations from the exciting PZT to the flexural traveling wave on linear guide are established and finally the related theoretical results under proper boundary conditions are given.
Key words :
Transporting apparatus
Non-contact USM
Mechanism
Vibration analyses
Boundary condition
收稿日期: 2009-04-21
[1]
刘文光;严铖. 考虑裂纹效应的弹性板振动分析模型 [J]. , 2014, 33(7): 133-137.
[2]
史冬岩;石先杰;王青山;李文龙;谷静静. T型耦合板结构振动特性研究 [J]. , 2014, 33(4): 185-189.
[3]
肖艳平;杨翊仁;叶露. 壁板边界松驰下颤振非线性动力特性分析 [J]. , 2014, 33(3): 157-161.
[4]
刘 峰;庞福振;韩端锋;缪旭弘. 运动边界相似法及船舶结构动力分析应用 [J]. , 2014, 33(20): 111-117.
[5]
牟金磊;朱石坚;刁爱民;李海涛. 边界条件对水下爆炸气泡运动特性的影响分析 [J]. , 2014, 33(13): 92-97.
[6]
卫洪涛;孔宪仁;王本利;张相盟. 基于振型转换的螺栓连接梁非线性振动研究 [J]. , 2014, 33(12): 42-47.
[7]
杜永峰;李 慧;;李春锋;. 粘滞阻尼减震结构最优极点配置与随机振动分析 [J]. , 2014, 33(11): 114-118.
[8]
徐宏海; 李晓阳. 立式玻璃磨边机砂轮离心振动特性分析 [J]. , 2013, 32(6): 168-172.
[9]
贺良国;刘永斌;张祺;张连生 潘巧生. 新型同步箝位控制压电马达 [J]. , 2013, 32(23): 26-31.
[10]
王伟东;吴冬梅;董为;杜志江. 基于虚拟激励和精细积分的移动手臂非平稳随机激励下振动分析 [J]. , 2013, 32(20): 72-75.
[11]
司乔瑞;余志顺;袁寿其;袁建平. 带诱导轮高速离心泵流动诱导振动数值分析 [J]. , 2013, 32(20): 102-106.
[12]
刘素娟;齐书浩;张文明 . 静电驱动裂纹微悬臂梁结构振动特性分析 [J]. , 2013, 32(17): 41-45.
[13]
魏 超;童水光;费钟秀. 基于灰色模型的电动助力车车架耐振性试验寿命预测 [J]. , 2013, 32(16): 112-116.
[14]
尹怡楠;胡 雄;李 勇. 重型起重电机振动的研究与健康评价标准的确定 [J]. , 2013, 32(12): 67-71.
[15]
贺岩松;沈旺;徐中明;李耀光;李传兵. 弹性板/矩形腔耦合声场的响度分析 [J]. , 2012, 31(19): 104-108.