正交各向异性矩形薄板振动的一种半解析方法

摘要
图/表
参考文献(23)
相关文章 (1)

全文: PDF (858 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要使用半解析的多项康氏法分析对边简支、对边固定和对边固定-简支的正交各向异性矩形薄板振动问题。选择多个梁特征函数作为试函数，精确满足对边所有边界条件。通过Gakerkin积分将偏微分振动方程转化为常微分方程组并整理为状态方程形式。强迫满足另一对边的边界条件，获得频率方程，确定固有频率。文献结果比较不仅证实了该方法的有效性，而且揭示通过该方法获得的对边简支板的解是精确解。最后，研究了不同长宽比下试函数项数对无量纲固有频率的影响。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章

关键词 ：正交各向异性矩形薄板, 多项康氏法, 梁特征函数, 正交性条件, 半解析解

Abstract：The semi-analytical multi-term Kantorovich method (MTKM) is adopted for vibration analysis of orthotropic thin rectangular plates with two opposite edges both simply- supported, both clamped and one clamped the other simply-supported. Multiple beam characteristic functions are used as trial functions, which can satisfy the boundary conditions on two opposite edges exactly. With the Galerkin integral, the partial differential equation of motion is turned into several ordinary differential equations, which are then rewritten in the form of a space-state equation. By enforcing the boundary conditions on the other two opposite edges, the transcendent frequency equation can be derived and non-dimensional frequencies can be determined. Good agreements are shown between the present results and those from the references. It is revealed that the results from present method are exact for thin plates with two opposite edges both simply-supported. Moreover, the effect of the term number of trail functions on the non-dimensional frequencies under different aspect ratios is also investigated.

Key words： Orthotropic thin rectangular plates multi-term Kantorovich method beam characteristic functions orthogonal conditions semi-analytical solution

收稿日期: 2015-05-25 出版日期: 2016-07-15

引用本文:

王淼1 陈永强2 李志敏3. 正交各向异性矩形薄板振动的一种半解析方法[J]. 振动与冲击, 2016, 35(14): 13-18.
Miao Wang1, Yong-Qiang Chen2, Zhi-Min Li3. A semi-analytical approach for vibration analysis of orthotropic thin rectangular plates. JOURNAL OF VIBRATION AND SHOCK, 2016, 35(14): 13-18.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2016/V35/I14/13

[1] Gorman D J. Free vibration analysis of rectangular plates [M]. New York: Elsevier North Holland. Inc, 1982.
[2] 钟阳, 张永山. 弹性地基上四边自由矩形薄板的解析解[J]. 应用数学和力学, 2006, 27(6): 735-740.
ZHONG Yang, ZHANG Yong-shan. Theoretic solution of rectangular thin plate on foundation with four edges free by symplectic geometry method [J]. Applied Mathematics and Mechanics, 2006, 27(6): 735-740.
[3] Leissa A W. Vibration of plates [R]. NASA SP-160. Washington DC: US Government Office, 1969.
[4] Kantorovich L V, Krylov V I. Approximate methods of higher analysis [M]. New York: Interscience publisher, 1958.
[5] Kerr A D. An extended Kantorovich method for the stress analysis of a clamped rectangular plate [J]. Acta Mechanica, 1968, 6(2):180-186.
[6] Yuan S, Jin Y, Williams F W. Bending analysis of Mindlin plates by the extended Kantorovich method [J]. ASCE Journal of Engineering Mechanics, 1998, 124(12): 1339-1345.
[7] Yuan S, Jin Y. Computation of elastic buckling loads of rectangular thin plates using the extended Kantorovich method [J]. Computers and Structures, 1998, 66(6): 861-867.
[8] Jones R, Milne B J. Application of the extended Kantorovich method to the vibration of clamped rectangular plates [J]. Journal of Sound and Vibration, 1976, 45(3): 309-316.
[9] Laura P A A, et al. Free vibrations of a rectangular plate of variable thickness elastically restrained against rotation along three edges and free on the fourth edge [J]. Journal of Sound and Vibration, 1979, 62(4): 493-503.
[10] 梁枢平. 求矩形薄板自振频率的一种近似解[J].振动与冲击, 1990, 9(4): 35-39.
LIANG Shu-ping. An approximate method for free vibration frequencies of rectangular thin plates [J]. Journal of Vibration and Shocks, 1990, 9(4): 35-39.
[11] Bhat R B, et al. Plate characteristic functions and natural frequencies of vibration of plates by iterative reduction of partial differential equation [J]. ASME Journal of Vibration and Acoustics, 1993, 115(2): 177-181.
[12] Lee J M, Kim K C. Vibration analysis of rectangular isotropic thick plates using Mindlin plate characteristic functions [J]. Journal of Sound and Vibration, 1995, 187(5): 865-867.
[13] Sakata T K, et al. Natural frequencies of orthotropic rectangular plates obtained by iterative reduction of the partial differential equation [J]. Journal of Sound and Vibration, 1996, 189(1): 89-101.
[14] Dalaei M, Kerr A D. Natural vibration analysis of clamped rectangular orthotropic plates [J]. Journal of Sound and Vibration, 1996, 189(3): 399-406.
[15] Bercin A N. Free vibration solution for clamped orthotropic plates using the Kantorovich method [J]. Journal of Sound and Vibration, 1996, 196(2): 243-247.
[16] Rajalingham C, et al. Vibration of rectangular plates by reduction of the plate partial differential equation into simultaneous ordinary differential equations [J]. Journal of Sound and Vibration, 1997, 203(1): 169-180.
[17] 钟阳等. 弹性地基上四边自由矩形薄板振动分析的Kantorovich法[J]. 振动与冲击, 2007, 26(3): 33-36.
ZHONG Yang, et al. Vibration analysis of a thin plate on Winkler foundation with completely free boundary by Kantorovich method [J]. Journal of Vibration and Shocks, 2007, 26(3): 33-36.
[18] Ashour A S. A semi-analytical solution of the flexural vibration of orthotropic plates of variable thickness [J]. Journal of Sound and Vibration, 2001, 240(3): 431-445.
[19] Shufrin I, Eisenberger M. Stability and vibration of shear deformable plates – first order and higher order analyses [J]. International Journal of Solids and Structures, 2005, 42(3-4): 1225-1251.
[20] Shufrin I, Eisenberger M. Vibration of shear deformable plates with variable thickness – first-order and higher-order analyses [J]. Journal of Sound and Vibration, 2006, 290(1-2): 465-489.
[21] Pairod S, Parunya T.Vibration analysis of stepped rectangular plates using the extended Kantorovich method [J]. Mechanics of Advanced Materials and Structures, 2014, DOI:
10.1080/15376494.2014.949922.
[22] Leissa A W, Qatu M S. Vibration of continuous systems [M]. New York: McGraw-Hill, 2011.
[23] Leissa A W. The free vibration of rectangular plates [J]. Journal of Sound and Vibration, 1973, 31(3): 257-293.