The purpose is to further investigate failure mechanism of tungsten alloy long rod penetrator piercing into armor target. LS-DYNA3D dynamic code is employed to simulate large plastic deformation evolution and adiabatic shear failure at penetration cratering stage. Large mushroom-head is first formed of tungsten alloy penetrator during cratering stage and then adiabatic shear failure followed due to plastic shear instability. The adiabatic shear bands are distributed mainly at the back of mushroom-head edge and the front of mushroom-head nose respectively. The mechanical condition which results in the distribution of adiabatic shear failure is also discussed. Based on the simulation, it can be proposed that the adiabatic shear failure distributing at the front of the mushroom-head may lead to short stagnating penetration, which is negative to the penetration performance.
王 猛 杨明川 罗荣梅 唐恩凌 . 钨合金杆式弹穿甲侵彻开坑阶段绝热剪切失效的数值模拟[J]. 振动与冲击, 2016, 35(18): 111-116.
Wang Meng, Yang Mingchuan, Luo Rongmei, Tang Enling . Numerical simulation of the adiabatic shear failure at cratering stage for tungsten alloy long rod piercing into armor. JOURNAL OF VIBRATION AND SHOCK, 2016, 35(18): 111-116.
[1] 范景莲. 钨合金及其制备新技术[M]. 北京：冶金工业出版社, 2006.
Fan Jinlian.Tungsten alloy and its new preparation technology[M]. Beijing: Metallurgical industry press, 2006
[2] Couque H, Nicolas G, Altmayer C. Relation between shear banding and penetration characterisitic of conventional tungsten alloy[J]. International Journal of Impact Engineering, 2007, 34(3):412-423
[3] 黄晨光, 董永香, 段祝平. 钨合金的冲击动力学性质及细微观结构的影响[J].力学进展，2003，33(4):432-445
Huang Chenguang, Dong Yongxiang, Duan Zhuping. Dynamic behaviors of tungsten alloy and its dependence on micro-and mesoscopic structure[J]. Advances in Mechanics, 2003, 33(4):432-445
[4] 徐永波, 白以龙. 动态载荷下剪切变形局部化、微结构演化与剪切断裂研究进展[J]. 力学进展, 2007, 37(4):496-516
Xu Yongbo, Bai Yilong. Shear localization, microstructure evolution and fracture under high-strain rate[J]. Advances in Mechanics, 2007, 37(4):496-516
[5] 肖大武, 李英雷, 蔡灵仓. 绝热剪切研究进展[J]. 实验力学, 2010, 25(4)：463-475
Xiao Dawu, Li Yinglei, Cai Lingcang. Progress in research on adiabatic shearing[J]. Journal of Experimental Mechanics, 2010, 25(4)：463-475
[6] Dey S, Børvik T, Hopperstad O S, et al. On the influence of constitutive in projectile impact of steel plates[J]. International Journal of Impact Engineering, 2007, 34(3):464-486
[7] Teng X, Wierzbicki T. Evaluation of six fracture models in high velocity perforation[J]. Engineering Fracture Mechanics,2006,73(12):1653-1678
[8] Rosenberg Z, Dekel E. On the deep penetration of deforming long rods[J]. International Journal of Solids and Structure, 2010,47(2):238-250
[9] Gupta N K, Iqbal M A, Sekhon G S. Effect of projectile nose, impact velocity and target thinckness on deformation behavior of aluminum plates[J]. International Journal of Solids and Structure, 2007, 44(10) : 3411-3439
[10] Johnson G R, Cook W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperature and pressures[J]. Engineering Fracture Mechanics, 1985, 21(1):31-48
[11] Li J C, Chen X W, Huang F L. FEM analysis on the self-sharpening behavior of tungsten fiber/metallic glass matrix composite long rod[J]. International Journal of Impact Engineering, 2015,86:67-83
[12] Tian Shiyu, Song Shuncheng. Dynamic properties test of steel 603 and 675 and establishment of constitutive relations[J].Journal of Ningbo University,2003,16(4):462-465
[13] Chen X W, Wei L M, Li J C. Experimental research on the long rod penetration of tungsten-fiber/Zr-based metallic glass matrix composite into Q235 steel target[J]. International Journal of Impact Engineering, 2015, 79：102-116
