Abstract：Hydraulic double-wheel trench cutter is the best underground excavation equipment today, and it will meet the diversity of the underlying soil in the process of the excavation, whose load fluctuations can bring difficulties in the process of machine designation and control. This study is based on the first domestic double-wheel trench cutter, and by designing the experiments process, extracting and analyzing the test data, comparing with the theory, draw the conclusion: The force of milling rock-soil appear periodic variation, and the periodic cycle is the time that milling wheel use in rotating a week, but affected by objective factor's randomness, the milling wheel's cutting force is random in a period; The milling wheel's force is determined by the strength of rock and soil, the milling wheel speed, the milling wheel's forward and reversing orientation, the higher the strength of rock and soil, the bigger the cutting force, the greater the cutting force's volatility; The higher the milling wheel speed , the bigger the cutting force, the greater the volatility of cutting force; Under the same conditions, the milling wheel's force is greater in forward than in the reverse operation; By cutting force curve, the change cycle time of cutting force、 the size of the average cutting force、 the cutting force fluctuation degree can be calculated, and these provide an accordance for electro-hydraulic control system.
李万莉1，刘祥勇1，姜燕1，刘佳宝1. 液压双轮铣槽机铣削岩土受力的试验探究[J]. 振动与冲击, 2016, 35(19): 119-124.
Li Wan-li1, Liu Xiang-yong1, Jiang Yan1, Liu Jia-bao1. The cutting load analysis of hydraulic double-wheel trench cutter. JOURNAL OF VIBRATION AND SHOCK, 2016, 35(19): 119-124.
[1]李万莉，刘佳宝，游正民. 双轮铣槽机铣削岩土过程的数值模拟[M]. 中国工程机械学报，2014，12(5)：31-39.
Li Wan-li, Liu Jia-bao, You Zheng-min. Double-wheel Trench Cutter’s Numerical Simulation Used in Milling Rock[M]. Chinese Journal of Construction Machinery,2014,12(5):31-39.
[2]李军强,刘宏昭,王忠民.线性粘弹性本构方程及其动力学应用研究综述[J].振动与冲击,2005,24(2): 116-121.
Li Jun-qiang, Liu Hong-zhao, Wang Zhong-min. The Review about Linear Viscoelastic Constitutive Equation and Dynamic Application Research[J]. Vibration and Shock, 2005,24(2):116-121.
[3]宋 刚．连续墙铣槽机铣轮优化设计实验研究 [D].北京：中国地质大学，2011．
Song Gang. The Milling Wheel Optimization Design Experiment Research about Continuous Wall‘s Slot [D]. Beijing: China University of Geosciences,2011.
[4] 李万莉，刘佳宝，游正民. 双轮铣槽机铣削岩土的受力分析[B]. 建筑机械化，2014，8(8)：42-45.
Li Wan-li, Liu Jia-bao, You Zheng-min. Double-wheel Trench Cutter’s Force Anlysys Used in Milling Rock[B]. Construction Mechanization,2014,8(8):42-45.
[5] 陈晓华，杨 启．大型绞吸挖泥船挖岩绞刀切削力计算分析 [J]．武汉理工大学学报（交通科学与工程版），2013，37(1):106-110．
Chen Xiao-hua, Yang Qi. Calculation of Cutting Forces for Cutter Head on Large Cutter Suction Dredger [J]. Journal of Wuhan University of Technology (Transportation Science and Engineering),2013,37(1):106-110.
[6] 李 晟．双轮铣槽机铣轮系统的动力学研究 [D].武汉：武汉大学，2014．
Li Sheng. Research on Dynamic Characteristics of Cutting Wheel System of Trench Cutter [D]. Wuhan: Wuhan University, 2014.
[7]夏毅敏，薛静，周喜温，等．盾构刀具破岩过程及其切削特性［Ｊ］．中南大学学报：自然科学版，2011，42(4):954-959.
Xia Yi-min, Xue Jing, Zhou Xi-wen,et al. The rock cutting process and cutter characteristics of shield[J]. Journal of Central South University: Science and Technology, 2011, 42(4):954-959.
[8]Livenore Software Technology Co.. LS-DYNA keyword user’s manual: Version 971[M]. Livemore: Livemore: Livemore Software Technology Corporation, 2005.
