Nonlinear Dynamics on Rubbing of a Blade-Rotor System
Liu Xin1, 2, Zhang Huabiao1, Sun Xiaolei1, Zhan Chuanlin1, Zhao Qingjun1,3
1.Institute of Engineering Thermophysics, Chinese Academy of Sciences 100190, Beijing;
2. University of Chinese Academy of Sciences 100190, Beijing;
3. Key Laboratory of Light-duty Gas-turbine, Chinese Academy of Sciences 100190, Beijing
As a kind of common failure of the rotating machines, rubbing could lead to catastrophic consequences such as instability of the rotor or blade damages. Rubbing between blades and casing is investigated in this paper. The blades are simplified as cantilever beams with centrifugal stiffening effect, while the blade/casing contact is modeled by Hertz contact force and an expression of blade/casing contact force has been derived. Based on the derived expression, influence of various parameters to the contact force is analyzed, such as the rotating speed, cross section of blade, length of blade and bending stiffness of blade. The results show that blade with shorter length and larger moment of inertia or under higher rotating speed will lead to greater contact force on the casing. Meanwhile, a blade-rotor/casing rubbing model is derived with the given expression of contact force and numeric simulations with this model are also conducted. The results show that the responses on the spectrum consist of synchronous frequency, reverse precession frequencies and their linear combinations. It is also observed that the blades can lead to side frequencies near the main frequencies. Different kinds of side frequencies are observed under different angular speeds. When the reverse precession frequencies are nearly linear with the angular speed, the side frequencies are also linear with the angular speed as well as the number of blades.
收稿日期: 2015-06-11
出版日期: 2016-10-15
引用本文:
刘昕1,2，张华彪1，孙小磊1，占传林1，赵庆军1,3. 叶轮转子碰摩的非线性动力学响应[J]. 振动与冲击, 2016, 35(20): 172-177.
Liu Xin1, 2, Zhang Huabiao1, Sun Xiaolei1, Zhan Chuanlin1, Zhao Qingjun1,3. Nonlinear Dynamics on Rubbing of a Blade-Rotor System. JOURNAL OF VIBRATION AND SHOCK, 2016, 35(20): 172-177.
[1] Zhang G F, Xu W N, Xu B, et al. Analytical study of nonlinear synchronous full annular rub motion of flexible rotor–stator system and its dynamic stability[J]. Nonlinear Dynamics, 2009, 57(4): 579-592.
[2] Jiang J, Ulbrich H. Stability analysis of sliding whirl in a nonlinear Jeffcott rotor with cross-coupling stiffness coefficients[J]. Nonlinear Dynamics, 2001, 24(3): 269-283.
[3] Zhang H, Chen Y. Bifurcation analysis on full annular rub of a nonlinear rotor system[J]. Science China Technological Sciences, 2011, 54(8): 1977-1985.
[4] Chu F, Zhang Z. Bifurcation and chaos in a rub-impact Jeffcott rotor system[J]. Journal of Sound and Vibration, 1998, 210(1): 1-18.
[5] Padovan J, Choy F. Nonlinear dynamics of rotor/blade/casing rub interactions[J]. Journal of turbomachinery, 1987, 109(4): 527-534.
[6] Padova C, Barton J, Dunn M G, et al. Experimental results from controlled blade tip/shroud rubs at engine speed[J]. Journal of Turbomachinery, 2007, 129(4): 713-723.
[7] Padova C, Barton J, Dunn M G, et al. Development of an Experimental Capability to Produce Controlled Blade Tip∕ Shroud Rubs at Engine Speed[J]. Journal of turbomachinery, 2005, 127(4): 726-735.
[8] Padova C, Dunn M, Barton J, et al. Controlled fan blade tip/shroud rubs at engine conditions[C]. ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, Vancouver,Canada, 2011: 951-961.
[9] Jiang J, Ahrens J, Ulbrich H, et al. A contact model of a rotating rubbing blade[C]. Proceedings of the Fifth International Conference on Rotor Dynamics, echnische Universitat Darmstadt, Darmstadt, Germany., 1998: 478-489.
[10] Ma H, Tai X, Han Q, et al. A revised model for rubbing between rotating blade and elastic casing[J]. Journal of Sound and Vibration, 2014.
[11] Jiang J. The analytical solution and the existence condition of dry friction backward whirl in rotor-to-stator contact systems[J]. Journal of vibration and acoustics, 2007, 129(2): 260-264.
