Tests and simulation for dynamic digging response of buried steel gas pipelines under excavator loading
XU Taolong1, YAO Anlin1, ZENG Xiangguo2, LI Youlü1, LI Xing2
1.School of Oil & Natural Gas Engineering, Southwest Petroleum University, Chengdu 610500, China;
2.College of Architecture and Environment, Sichuan University, Chengdu 610065, China
Abstract：Based on the published results recently, the dynamic responses of steel gas pipelines under various digging cases were investigated here. Total 21 static/dynamic test groups with different driving cylinders, different digging heights, different digging angles and digging teeth were designed and conducted. The excavator-pipeline-soil multi-body dynamic model was established by using ADAMS. STEP function control and Script simulation control were realized according to cylinders pressure and displacement measured data to reproduce typical test cases and to acquire dynamic/ static digging loads, then the dynamic digging load factor was determined. Finally, using the static/dynamic loading extracted from simulation, the static/dynamic strains of pipeline measured points were obtained with ANSYS/LS-DYNA, they agreed well with the measured test data. Here, the quantitative identification for dynamic digging load factors under multiple cases was conducted by using tests and simulation methods, and the results provided a reference for designing prevention and control measures against digging damages of buried steel gas pipeline network under complicated environment.
徐涛龙,姚安林1，曾祥国2，李又绿1，李星2. 埋地钢质输气管道动态挖掘响应的试验研究及模拟分析[J]. 振动与冲击, 2017, 36(1): 230-239.
XU Taolong1, YAO Anlin1, ZENG Xiangguo2, LI Youlü1, LI Xing2. Tests and simulation for dynamic digging response of buried steel gas pipelines under excavator loading. JOURNAL OF VIBRATION AND SHOCK, 2017, 36(1): 230-239.
[1] www.clickbeforeyoudig.com
[2] www.call811.com
[3] http://www.national-one-call.co.uk/
[4] 8th EGIG report, December 2011.
[5] PHMSA Flagged Incidents File - Dec 6, 2013.
[6] 王婷, 郑洪龙, 宋汉成, 等.城市燃气管网的完整性管理[J]. 油气储运, 2012, 31(3): 184-187.
WANG Ting, ZHENG Hong-long, SONG Han-cheng, et al. Integrity management of urban gas pipeline network [J]. Gas Storage and Transportation, 2012, 31(3): 184-187.
[7] Roovers, P., & Steiner, M., & Zarea, M. (n.d). EPRG Recommendations for the Assessment of the Tolerance and Resistance of Pipelines to External Damage. European Pipeline Research Group (EPRG) Paper 21.
[8] Cappanera, A., & Champavere, R., & Dezobry, J., & Dodi, F., & Engel, A., & Linke, G., & Philibert, C., & Zarea, M. (n.d). The Pipe Aggression Rig: A Comprehensive Means for Studying Pipe Resistance to Third Party Damage. European Pipeline Research Group (EPRG) Paper 22.
[9] Deo, I., & Philibert, C., & Zarea, M. (n.d). Full Scale Experimental Approach of Gas Transmission Pipeline Resistance to Dynamic Puncture. European Pipeline Research Group (EPRG) Paper 23.
[10] Deo, I., & Philibert, C., & Zarea, M. (n.d). EPRG Dynamic Puncture Tests: A Video Film. European Pipeline Research Group (EPRG) Paper 24.
[11] Chatain, P. (n.d). An Experimental Evaluation of Punctures and Resulting Dents in Transmission Pipelines. European Pipeline Research Group (EPRG).
[12] Corder, I., & Corbin, P., & Hopkins, P. (n.d). The Resistance of Gas Transmission Pipelines to Mechanical Damage. European Pipeline Research Group (EPRG).
[13] Maxey, W. (n.d). Outside Force Defect Behaviour. Battelle Columbus Division.
[14] Kiefner, J.F., & Maxey, W.A. (n.d). How to Judge Defect Severity on Offshore Pipelines. Battelle Columbus Laboratories.
[15] Battelle Columbus Laboratories. Line Pipe Resistance to Outside Force. Report for American Gas Association Pipeline Research Committee, 12 October 1994.
[16] Cosham, A., & Edwards, A., & Espiner, R., & Francis, A., & Lamb, M. Uprating an In-Service Pipeline Using Reliability-Based Limit State Methods. Risk-Based and Limit State Design & Operation of Pipelines, Aberdeen, UK, 21-22 May 1997.
[17] Jones, D.G. The Significance of Mechanical Damage to Pipelines [C]. 3R International, 21. Jargang, Heft 7, Juli 1982.
[18] Jones, D.G., & Hopkins, P. The Influence of Mechanical Damage on Transmission Pipeline Integrity [C]. British Gas R&D, IGU 1983 International Gas Research Conference, London 13-16 June 1983.
[19] Fearnehough, G., & Jones, D.G. An Approach to Defect Tolerance in Pipelines [C]. British Gas R&D, Conference on Defect Tolerance of Pressure Vessels Institution of Mechanical Engineers, May 1978.
[20] British Gas Engineering Standard BGC/PS/P11. Procedures for Inspection and Repair if Damaged Steel Pipelines Designed to Operate at Pressures above 7 bar. British Gas.
[21] D.C. Brooker. Resistance of Pipelines to External Interference, Phase II - Final Report, March 2002.
[22] D.C. Brooker. Experimental puncture loads for external interference of pipelines by excavator equipment [J]. International Journal of Pressure Vessels and Piping 2005, 82: 825-832.
[23] D.C. Brooker. Numerical modelling of pipeline puncture under excavator loading.Part I. Development and validation of a finite element material failure model for puncture simulation [J]. International Journal of Pressure Vessels and Piping, 2003, 80: 715-725.
[24] D.C. Brooker. Numerical modelling of pipeline puncture under excavator loading.Part II: parametric study [J]. International Journal of Pressure Vessels and Piping, 2003, 80: 727-735.
[25] A. Stewart, Pipeline resistance to external interference[R], Tech. rep., APIA, 2000.
[26] Gas and Fuel Corporation of Victoria. Report on Puncture Resistance Testing of Pipes. Gas and Fuel Corporation of Victoria. 1983.
[27] 张善元, 路国运, 程国强等. 圆管及内充压力介质管道撞击大变形与破坏[J]. 力学进展, 2004, 34(1): 23-31.
ZHANG Shan-yuan, LU Guo-yun, CHENG Guo-qiang, et al. The advances of research on the impact damage and failure of empty and half-filled tubes [J]. Advances in Mechanics, 2004, 34(1): 23-31.
[28] 李秀峰, 何仁洋, 刘长征等. 在役埋地原油管道机械撞击损伤缺陷安全评定[J]. 化工设备与管道, 2006, 43(2): 50-53.
LI Xiu-feng, HE Ren-yang, LIU Chang-zheng, et al. Safety assessment for defects caused by mechanical impact in in service buried crude oil piping [J]. Process Equipment & Piping，2006, 43(2): 50-53.
[29] 伍颖, 张鹏, 彭星煜等. 管道中沟槽型凹痕缺陷破裂强度评估方法[J]. 压力容器, 2009, 26(4): 47-50.
WU Ying, ZHANG Peng, PENG Xing-yu, et al. Assessment of the burst strength of a dent and gouge on pipeline [J]. Pressure Vessel Technology, 2009, 26(4): 47-50.
[30] 赵忠刚, 张卿蕊, 冯斌等. 油气管道机械损伤的完整性研究进展[J]. 油气储运, 2012, 31(4): 241-245.
ZHAO Zhong-gang, ZHANG Qing-rui, FENG Bin, et al. Progress in the integrity research of mechanical damage of oil and gas pipelines [J]. Oil & Gas Storage and Transportation, 2012, 31(4): 241-245.
[31] Anlin Yao, Taolong Xu, Xiangguo Zeng, Hongye Jiang. Numerical analyses of the stress and limiting load for buried gas pipeline under excavation machine impact [J]. J. Pipeline Syst. Eng. Pract., 10.1061/(ASCE)PS.1949-1204.0000137, A4014003.
[32] 姚安林, 徐涛龙, 李星, 曾祥国. 基于试验和数值模拟确定挖掘机具作用下埋地输气管道的动载荷[J]. 振动与冲击, 2014, 33(17): 39-46.
YAO An-lin, XU Tao-long, LI Xing, et al. Determining dynamic load on a buried gas pipeline under mining machinery actions based on test and numerical simulation [J]. Journal of Vibration and Shock, 2014, 33(17): 39-46.
[33] 陆春芸, 液压挖掘机动力学研究[J]. 武汉冶金科技大学学报, 1996, 19(4): 476-481.
LU Chun-Yun, Study of dynamics of hydraulic excavator [J]. Journal of Wuhan Yejin University of Science and Technology, 1996, 19(4): 476-481.
[34] 丛培山. 矿用挖掘机原始参数的几个问题[J]. 矿山机械, 1982, 8: 1-9.
CONG Pei-Shan. Several problems of original parameters for mine excavator [J]. Mining & Processing Equipment, 1982, 8: 1-9.
[35] 太原重型机械厂设计院. P&H2300XP挖掘机测试报告[R], 1990.
[36] LS-DYNA Keyword User’s Manual, Volume 1. Livermore Software Technology Corporation, Version 971, May 2007.
[37] Johnson GR. Cook W H. A constitutive model and data for metals subjected to large strains, high strain rate and high temperatures [C]. In: Proceedings of the 7th International Symposium on Ballistics, the hague, Netherlands, 1983, 541-547.
