Characteristics of forces acted on an axial flow compressor rotor under rotating stall condition
WAN Shuting1,DOU Longjiang1,ZHAN Changgeng2
1. Department of Mechanical Engineering,North China Electric Power University,Baoding 071003,China;
2. Hangzhou Steam Turbine Co.,Ltd.,Hangzhou 310000,China
Abstract:The velocity change and tangential force acted on the rotor of an axial flow compressor were analyzed in consideration of the rotating stall condition and the characteristics of tangential force. The principle and process of rotating stall were expounded theoretically. Then the tangential force acted on the rotor of axial flow compressor was deduced,when the compressor works in both normal and stall conditions. The characteristics of tangential force in rotating stall condition were obtained,and a comparison between the simulated and theoretical results was carried out. The feasibility of the theoretical analysis was verified by experimental simulations and the characteristics of tangential force and velocity change in rotating stall condition were obtained. The work mentioned above provides a useful reference to the subsequent vibration analysis and optimum structure design of compressor rotors.
万书亭1,豆龙江1,詹长庚2. 部分失速工况下轴流压气机转子受力特性的研究[J]. 振动与冲击, 2017, 36(2): 101-106.
WAN Shuting1,DOU Longjiang1,ZHAN Changgeng2. Characteristics of forces acted on an axial flow compressor rotor under rotating stall condition. JOURNAL OF VIBRATION AND SHOCK, 2017, 36(2): 101-106.
[1] 蒋洪德,任静,李雪英. 重型燃气轮机现状与发展趋势[J]. 中国电机工程学报,2014,34(29):5096-5102
Jiang Hongde, Ren Jing, Li Xueying. Status and Development Trend of the Heavy Duty Gas Turbine [J]. Proceedings of the CSEE, 2014,34(29):5096-5102
[2] Epstein A H, Ffowcs Williams J E, Greitzer E M. Active Suppression of Compressor Instabilities [J]. Journal of Propulsion and Power, 1989,5: 204-211
[3] Day I J. Stall Inception in Axial Flow Compressor [J]. ASME Jouranl of Turbomachinery 1991, 115: 1-9
[4] Greitzer E M. Surge and Rotating Stall in Axial Flow Compressor -I:Theoretical Compression System Model[J]. Journal of Engineering for Power, Transactions ASME.1976, 98:190-198
[5] Moore F K, Greitzer E M. Theory of POST-Stall Transients in Axial Compression Systems [J]. Journal of Engineering for Gas Turbines and Power.1986,108(2):231-239
[6] Feulner M R, Hendricks G J, Paduano J D. Modeling For Control of Rotating Stall in High Speed Multi-stage Axial Compressors[R]. ASME Paper 1994-GT-2, 1994
[7] Gravdahl J T, Egeland O. A Moorre-Greitzer Axial Compressor Model with Spool Dynamics [C]. Proceeding of the 36th IEEE Conference on Decision and Control. California San Diego, US: IEEE, 1997:4714-4719
[8] HU Jun, Fottner L. A new simplified model of post stall transients in axial compression system [J]. Journal of Thermal Science, 1999, 8(3): 176-189
[9] 蒋康涛,徐刚,黄伟光,陈静宜.低速轴流压气机旋转失速的二维数值模拟[J]. 工程热物理学报,2003, 24(6): 935-938
Jiang Kangtao, Xu Gang, Huang Weiguang, Chen Jingyi. Two Dimensional Numerical Simulation of Rotating Stall in a Low Speed Axial Compressor[J]. Journal of the Engineering Thermophysics, 2003, 24(6): 935-938
[10] 蒋康涛, 张宏武,黄伟光,陈静宜.低速轴流压气机单转子旋转失速三维数值模拟和实验比较[J]. 工程热物理学报,2005, 26(Suppl): 77-80
Jiang Kangtao, Xu Gang, Huang Weiguang, Chen Jingyi. Comparison of Numerical Simulation and Experiment of Rotating Stall in a Low Speed Axial Compressor[J]. Journal of the Engineering Thermophysics, 2005, 26(Suppl): 77-80
[11] 吴艳辉, 吴俊峰, 根仿玉. 轴流压气机转子近叶尖流动的试验和数值研究之一:准定常工况流动特征分析[J]. 工程热物理学报, 2013,34(5):836-840
Wu Yanhui, Wu Junfeng, Gen Fangyu. Experimental and Numerical Investigation of Near-Tip Flow-Field in an Axial Flow Compressor Rotor-Part I: Flow Characteristics at Quasi-Steady OperatingConditions [J]. Journal of Engineering Thermophysics, 2013,34(5):836-840
[12] 吴艳辉, 吴俊峰, 根仿玉. 轴流压气机转子近叶尖流动的试验和数值研究之二:近失速工况流动特征分析[J]. 工程热物理学报, 2014,35(1):60-65
Wu Yanhui, Wu Junfeng, Gen Fangyu. Experimental and Numerical Investigation of Near-Tip Flow-Field in an Axial Flow Compressor Rotor-Part II: Flow Characteristics at Near Stall Operating Conditions [J]. Journal of Engineering Thermophysics, 2014,35(1):60-65