The vibration suppression of a composite shaft operating at high speeds is an important issue in structural design of advance power transmission of helicopters and automobiles.Constrained layer damping technology is an effective method in engineering field and it is widely used for reducing structural vibration.However,the studies on strengthening damping of a composite shaft by using constrained layer damping treatment are relatively few.Here,a mechanical model was developed for a rotating composite shaft with passive constrained layer damping (PCLD).Based on the constitutive relation of materials and the strain-displacement relation,the kinetic energy and strain energy of the composite shaft,constrained layer and viscoelastic layer were derived.Hamilton’s principle was used to derive the motion equations of the shaft with PCLD.The motion equations were discretized by using the general Galerkin method.The natural frequencies and modal damping ratios were obtained by computing a matrix eigenvalue problem.Using the assumption of proportional damping and Runge-Kutta integration algorithm,the time history responses of the system’s damped free vibration were gained.The effects of constrained layer material,viscoelastic layer material,stacking sequences,ratio of length to diameter and rotating speed on the natural vibration characteristics and damped free vibration responses of the composite shaft with PCLD were analyzed using numerical simulation.
时玉艳,任勇生,张玉环 . 具有约束层阻尼旋转复合材料轴的动态特性研究[J]. 振动与冲击, 2017, 36(7): 45-56.
SHI Yuyan,REN Yongsheng,ZHANG Yuhuan. Vibration characteristics of a rotating composite shaft with constrained layer damping. JOURNAL OF VIBRATION AND SHOCK, 2017, 36(7): 45-56.
[1]Hetherington E L, Kraus R E, Darlow M S. Demonstration of a super critical composite helicopter power transmission shaft [J]. Journal of American Helicopter Society, 1990, 35(1): 23-28.
[2]Darlow MS, Creonte J. Optimal design of composite helicopter power transmission shafts with axially varying fiber lay-up[J]. J Am Helicopter Soc 1995;40(2):50-56.
[3]Lee D G,Kim H S,Kim J W,Kim J K. Design and manufacture of an automotive hybrid aluminum/composite drive shaft[J].Composite Structures,2004,63:87-99.
[4]Talib A R A,Ali A, Badie M A, Lah N A C, Golestaneh A F.Developing a hybrid,carbon/glass fiber-reinforced,epoxy composite automotive drive shaft[J].Materials and Design,2010,31:514-521.
[5]Badie M A, Mahdi E, Hamouda A M S.An investigation into hybrid carbon/glass fiber reinforced epoxy composite automotive drive shaft[J].Materials and Design, 2011,32:1485-1500.
[6]戴德沛.阻尼技术的工程应用[M]. 北京:清华大学出版社,1991.
[7]Ross D, Ungar E E, Kerwin E M. Damping of plate flexural vibrations by means of viscoelastic laminate. Struct Damping Sect., 1959, 3:49-88.
[8]DiTaranto R A. Theory of vibratory bending for elastic and viscoelastic layered finite-length beams. J Appl. Mech., 1965, 32(4):881-886.
[9]Mead D J, Markus S. The forced vibrations of a three-layer damped sandwich beam with arbitrary boundary conditions. J Sound Vib.,1969, 10(2):163-175.
[10]Kerwin, E M. Damping of flexural waves by a constrained viscoelastic layer [J]. Journal of the Acoustical Society of America, 1959, 31(7): 952-962.
[11]Chen Y C, Huang S C. An optimal placement of CLD treatment for vibration suppression of plates[J]. International Journal of Mechanical Sciences, 2002, 44(8):1801-1821.
[12]DiTaranto R A. Theory of vibratory bending for elastic and viscoelastic layered finite-length beams[J]. J.Appl .Mech,1965,32(4):881–886.
[13]Mead, D J and Markus S. The forced vibration of a three-Layer damping sandwich beam with arbitrary boundary conditions [J]. Journal of Sound and Vibration, 1969, 10(2): 163-175.
[14]Napolitano K. L, Grippo W, Kosmatka J. B. and Johnson C. D. A comparison of two cocured damped composite torsion shafts [J]. Composite Structures, 1998, 43(2): 115–125.
[15]Venkatachalam R and Prabu S. B. Vibration characteristics of orthotropic shaft-disk system with different constrained damping layers: experimental and numerical study [J].International Journal of Advanced Manufacturing Technology, 2012, 65: 601–610.
[16]Ghoneim H, Lawrie D J. Analysis of the flexural vibration of a composite drive shaft with partial cylindrical constrained layer damping treatment[J].Journal of Vibration and Control,2006,12:25-55.
[17]Ren Yongsheng,Zhang Yuhuan. Free vibration and damping of rotating composite shaft with a constrained layer damping[J]. Shock and Vibration, vol.2016, Article ID 9045460, 20 pages.
[18]Dharmarajan S, Mccutchen H. Shear coefficients for orthotropic beams[J].Journal of Composite Materials,1973,7:530-535.
[19]Kim W, Argento A and Scott R A. Free vibration of a rotating tapered composite Timoshenko shaft[J]. Journal of sound and vibration,1999,226(1):125-147.
[20]Zinberg H, Symonds M F. The development of an advanced composite tail rotor drive shaft[C]. Presented at the 26th Annual National Forum of the American Helicopter Society, June,1970, Washington, DC.
[21]Chang M Y, Chen J K, Chang C Y. A simple spinning laminated composite shaft model[J]. International Journal of Solids and Structures,2004, 41:637-662.
[22]Singh S P, Gupta K. Composite shaft rotordynamic analysis using a layerwise theory[J]. Journal of Sound and Vibration, 1996, 191 (5):739-756.
[23]Jin GY, Yang C M, Liu Z G, Gao SY, Zhang CY. A unified method for the vibration and damping analysis of constrained layer damping cylindrical shells with arbitrary boundary conditions[J]. Composite Structures,2015, 130:124-142.