Abstract:Based on the variable limit integral theory,the weighted variable limit integral of response function was constructed with the least squares estimation technique.By performing the integral moving average method several times,the high-frequency noise in the measured noise was filtered effectively.Aiming at the residual low-frequency noise in the measured response,the L∞ norm fitting regularization method was used for load identification.In order to realize this regularization method,a monotonicity validation method was proposed to select the optimal regularization parameters.The numerical simulation and the test verification showed that the proposed monotonicity validation method can determine the optimal regularization parameters of the L∞ norm fitting regularization method effectively; in addition,the identified load is more accurate and more reliable than that using the traditional L2 norm regularization method; aiming at the characteristics of noise in telemetry data,the impact load is identified effectively by using the L∞ norm fitting regularization method and simulated telemetry data.
[1] 郭荣, 房怀庆, 裘剡, 等. 基于Tikhonov正则化及奇异值分解的载荷识别方法[J]. 振动与冲击, 2014, 33(6): 53-58.
GUO Rong, FANG Huai-qing, QIU Shan, at el. Novel load identification method based on the combination of Tikhonov regularization and singular value decomposition [J]. Journal of vibration and shock, 2014, 33(6): 53-58.
[2] 杨武, 刘莉, 周思达, 等. 前后向时间序列模型联合估计的时变结构模态参数辨识[J]. 振动与冲击, 2015, 34(3):129-135.
YANG Wu, LIU Li, ZHOU Si-da, at el. Modal parameter identification of time-varying structures using a forward-backward time series model based on joint estimation [J]. Journal of vibration and shock, 2015, 34(3):129-135.
[3] 马超, 华红星. 基于改进正则化方法的状态空间载荷识别技术. 振动与冲击, 2015, 34(11): 146-149.
MA Chao, HUA Hong-xing. State space load identification technique based on an improved regularized method [J]. Journal of vibration and shock, 2015, 34(11): 146-149.
[4] M. Ghajari, Z. Sharif-Khodaei, M.H. Aliabadi1, at el. Identification of impact force for smart composite stiffened panels [J]. Smart Materials and Structures, 2013, 22: 085014. (13pp.).
[5] 马超, 华红星. 一种基于新的正则化技术的冲击载荷识别方法[J]. 振动与冲击, 2015, 34(12): 164-168.
MA Chao, HUA Hong-xing. Impact force identification based on improved regularization technique [J]. Journal of vibration and shock, 2015, 34(12): 164-168.
[6] H. Innoue, J.J. Harrigan, S.R. Reid. Review of inverse analysis for indirect measurement of impact force [J]. Appl. Mech. Rev. 2001, 54(6): 503-524.
[7] A.N. Thite, D.J. Thompson. The quantification of structure-borne transmission paths by inverse methods, Part1: improved singular value rejection methods [J]. Journal of Sound and Vibration, 2003, 264(2): 411-431.
[8] J.F. Doyle. A wavelet deconvolution method for impact force identification [J]. Experimental mechanics, 1997, 37(4): 403-408.
[9] J. Sanchez, H. Benaroya. Review of force reconstruction techniques [J]. Journal of Sound and Vibration, 2014, 333(14): 2999-3018.
[10] Mao Y.M., Guo X.L., Zhao Y.. A state space force identification method based on Markov parameters precise computation and regularization technique [J]. J Sound Vib, 2010, 329: 3008-19.
[11] C. Clason. L∞ fitting for inverse problems with uniform noise [J]. Inverse Problem, 2012, 28; 104007 (18pp).
[12] Peter A Gorry. General Least-Squares Smoothing and Differentiation by the Convolution (Savitzky-Golay) Method [J]. Analytical Chemistry, 1990, 62(6): 570-573.
[13] Liu J., Sun X.S., Han X., et al. A Novel Computational Inverse Technique for Load Identification Using the Shape Function Method of Moving Least Square Fitting [J]. Computers and Structures, 2014, 144: 127-137.
[14] C. Clason, K. Ito, et al.. Minimal invasion: An optimal L∞ state constraint problem [J]. ESAIM: Mathematical Modelling and Numerical Analysis, 2010, 45(3): 505-522.
[15] Hintermüller, et al.. The primal-dual active set strategy as a semi-smooth Newton method [J]. SIAM J. Optim., 2003, 13(3): 865-888.
[16] Ulbrich. Semi-smooth Newton methods for operator equations in function space [J]. SIAM J. Optim., 2003, 13(3): 805-842.
[17] Golub G. H., Heath M., Wahba G.. Generalized cross-validation as a method for choosing a good ridge parameter [J]. Technometrics, 1979, 21: 215-223.
[18] K. Choi, F.K. Chang. Identification of impact force and location using distributed sensors [J]. AIAA Journal, 1996, 34(1): 136-142.
[19] G. Yan, L. Zhou. Impact load identification of composite structure using genetic algorithms [J]. Journal of Sound and Vibration, 2009, 319: 869-884.
[20] K. Zhou, J.C. Doyle, K. Glover, Robust and Optimal Control, Prentice Hall, New Jersey, 1996.