摩擦对齿轮振动噪声影响的研究进展

摘要
图/表
参考文献(72)
相关文章 (15)

全文: PDF (1192 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要围绕齿面摩擦引起的齿轮系统振动和噪声问题，从计入齿面摩擦的齿轮动力学模型、齿轮系统动态响应、齿轮摩擦噪声以及实验研究等方面，综述了近20年来齿轮振动噪声的研究现状和发展趋势。重点阐述了计入齿面摩擦的齿轮动力学研究的方式方法，总结了计入摩擦齿轮动力学的主要研究结论。最后就现有研究中存在的主要问题及研究方向提出了建议。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	刘更
	南咪咪
	刘岚
	吴立言
	赵颖

关键词 ：齿轮 , 摩擦 , 动力学 , 噪声 , 振动

Abstract：Aiming at the vibration and noise in gear systems caused by gear tooth friction, this paper summarizes the relative articles in the past two decades. This review includes the tribodynamics models, dynamic responses, gear friction noise and their experiments. The methods to analyze the tribodynamics and the friction noise of gears are summarized and some conclusions are drawn from the present studies. Based on the summary of the existing researches, some suggestions are presented for the future research and development.

Key words： Gear Friction Dynamics Noise Vibration

收稿日期: 2016-10-12 出版日期: 2018-02-15

引用本文:

刘更，南咪咪，刘岚，吴立言，赵颖. 摩擦对齿轮振动噪声影响的研究进展[J]. 振动与冲击, 2018, 37(4): 35-41.
LIU Geng，NAN Mi-mi，LIU Lan，WU Li-yan，ZHAO Ying. Review on Tribodynamics and Friction Noise of Gears. JOURNAL OF VIBRATION AND SHOCK, 2018, 37(4): 35-41.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2018/V37/I4/35

[1] Martin K F. A Review of Friction Predictions in Gear Teeth [J]. Wear, 1978, 49(2): 201−238.
[2] Welbourn D B. Fundamental Knowledge of the Gear Noise-A Survey [C]. Conference on Noise and Vibrations of Engines and Transmission, Cranfield, 1979, 9−14.
[3] Attia A Y. Noise of Involute Helical Gears [J]. Journal of Engineering for industry, 1969, (1):165−171.
[4] Houser D. The root of gear noise: Transmission error [J]. Power Transmission Design, 1986, 27−30.
[5] Eritenel T, Parker R G. Three-dimensional Nonlinear Vibration of Gear Pairs [J]. Journal of Sound and Vibration, 2012, 331(15): 3628−3648.
[6] Yoon K. Analysis of Gear Noise and Design for Gear Noise Reduction [D]. Purdue University, 1993.
[7] Wu Y, Wang J, Han Q. Contact Finite Element Method for Dynamic Meshing Characteristics Analysis of Continuous Engaged Gear Drives [J]. Journal of Mechanical Science and Technology, 2012, 26(6): 1671−1685.
[8] Kahraman A, Lim J, Ding H. A Dynamic Model of a Spur Gear Pair with Friction[C]. Proceedings of the 12th IFToMM world congress, Besancon, France, 2007.
[9] He S, Gunda R, Singh R. Inclusion of Sliding Friction in Contact Dynamics Model for Helical Gears[J]. Journal of Mechanical Design, 2007,129(1): 48−57.
[10] He S, Gunda, R, and Singh, R. Effect of Sliding Friction on the Dynamics of Spur Gear Pair With Realistic Time-Varying Stiffness [J]. Journal of Sound and Vibration. 2007, 301(3-5): 927−949.
[11] Velex P, and Cahouet V. Experimental and Numerical Investigations on the Influence of Tooth Friction in Spur and Helical Gear Dynamics [J]. Journal of Mechanical Design, 2000, 122(4): 515−522.
[12] Lundvall O, Strömberg N, Klarbring A. A Flexible Multi-Body Approach for Frictional Contact in Spur Gears [J]. Journal of Sound and Vibration, 2004, 278(3): 479−499.
[13] Liu G, Parker R G. Impact of Tooth Friction and its Bending Effect on Gear Dynamics [J]. Journal of Sound and Vibration ,2009, 320(4-5): 1039−1063.
[14] 苟向锋, 祁常君, 陈代林. 考虑齿面接触温度的齿轮系统非线性动力学建模及分析[J], 机械工程学报,2015, 51(11): 71−77.
Gou Xiang-feng, Qi Chang-jun, Chen Dai-lin. Nonlinear Dynamic Modelling and Analysis of Gear System with Tooth Contact Temperature [J]. Journal of Mechanical Engineering, 2015, 51(11): 71-77.
[15] Saxena A, Parey A, Chouksey M. Time varying mesh stiffness calculation of spur gear pair considering sliding friction and spalling defects [J]. Engineering Failure Analysis, 2016, 70: 200−211.
[16] Vaishya M, Singh R. Sliding Friction-Induced Non-Linearity and Parametric Effects in Gear Dynamics [J]. Journal of Sound and Vibration, 2001, 248(4): 671−694.
[17] Gunda R, Singh R. Dynamic Analysis of Sliding Friction in a Gear Pair[C]. Proceedings of Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, USA, September 2-6, 2003, ASME, C2003:1−8
[18] Chang Le-hao, Liu Geng, Wu Li-yan. A robust model for determining the mesh stiffness of cylindrical gears [J]. Mechanism and Machine Theory. 2015, 87: 93-114.
[19] Chinmaya K, Mohanty A R, An Algorithm for Determination of Time-varying Frictional Force and Torque in a Helical Gear System [J], Mechanism and Machine Theory, 2007, 42(4): 482−496.
[20] Liu C, Qin D, Liao Y, Dynamic Model of Variable Speed Process for Herringbone Gears Including Friction Calculated by Variable Friction Coefficient [J], Journal of Mechanical Design, 2014, 136:041006-1−041006-12.
[21] Feng Z, Wang S, Lim T C and Peng T. Enhanced Friction Model for High-speed Right-angle Gear Dynamics [J]. Journal of Mechanical Science and Technology, 2011, 25 (11): 2741−2753.
[22] Song C, Zhu C, Liu W. Sliding Friction on Dynamics of Crossed Beveloid Gears with Small Shaft Angle[J]. Journal of Mechanical Science and Technology,2013, 27 (5): 1255−1263.
[23] GB/Z 6413.1-2003.
[24] Duan C, Singh R. Dynamics of a 3DOF torsional system with a dry friction controlled path [J]. Journal of Sound and Vibration, 2006, 289 (4-5): 657−688.
[25] Drozdov Y N, and Gavrikov Y A. Friction and Scoring Under the Conditions of Simultaneous Rolling and Sliding of Bodies [J]. Wear, 1967(11): 291–302.
[26] O’Donoghue J P, and Cameron A. Friction and Temperature in Rolling Sliding Contacts [J]. ASLE Transactions, 1966, 9: 186–194.
[27] ISO TC 60, DTR 13989.
[28] Benedict G H, and Kelly B W. Instantaneous Coefficients of Gear Tooth Friction [J]. Transactions of ASLE, ASLE Lubrication Conference, 1961, 4(1):59–70.
[29] Kelley B and Lemanski A. Lubrication of involute gearing [C]. Proceedings of Institution of Mechanical Engineers 1967, 182:173−184.
[30] Buckingham. Analytical Mechanics of Gears [M]. Dover Publications，New York,1949.
[31] Cheon G. Analysis of the Nonlinear Behavior of Gear Pairs Considering Hydrodynamic Lubrication and Sliding Friction [J]. Journal of Mechanical Science and Technology, 2009 , 23(8): 2125−2137.
[32] Xu H., Kahraman A., Anderson, N. E. and Maddock, D. Prediction of Mechanical Efficiency of Parallel-axis Gear Pairs [J]. Journal of Mechanical Design, 2007, 129(1): 58−68.
[33] Li S, Kahraman A. A Tribo-dynamic Model of a Spur Gear Pair [J]. Journal of Sound and Vibration,2013, 332(20): 4963−4978.
[34] He S, Cho S, Singh R. Prediction of Dynamic Friction Forces in Spur Gears Using Alternate Sliding Friction Formulations [J]. Journal of Sound and Vibration 309 2008, 309(3-5): 843−851.
[35] Diab Y, Ville F, Velex P. Prediction of Power Losses Due to Tooth Friction in Gears [J]. Tribology Transactions, 2006, 49(2): 260−270.
[36] Jiang H, Shao Y, Mechefske C K and Chen X. The Influence of Mesh Misalignment on the Dynamic Characteristics of Helical Gears Including Sliding Friction [J]. Journal of Mechanical Science and Technology, 2015, 29(11): 4563−4573.
[37] Fernandes P, Rodrigues J, Seabra J, Sabino J. Influence of Friction on Gear Dynamic [C]. 5th International Conference on Mechanics and Materials in Design, Porto-Portugal, 24-26 July, 2006:1−21.
[38] Chinmaya K, Mohanty A R. Determination of Time-varying Contact Length, Friction force, Torque and Forces at the Bearings in a Helical Gear System [J]. Journal of Sound and Vibration, 2008, 309(1-2): 307−319.
[39] Vaishya M, Singh R. Analysis of Periodically Varying Gear Mesh Systems with Coulomb Friction Using Floquet Theory [J]. Journal of Sound and Vibration, 2001, 243(3): 525−545.
[40] Ghosh S, Chakraborty G. Parametric Instability of a Multi-degree-of-freedom Spur Gear System with Friction [J]. Journal of Sound and Vibration, 2015, 354: 236−253.
[41] 常乐浩. 平行轴齿轮传动系统动力学通用建模方法与动态激励影响规律研究[D]. 西安：西北工业大学, 2014.
Chang Le-hao. A Generalized Dynamic Model for Parallel Shaft Gear Transmissions and the Influences of Dynamic Excitations [D]. Xi’an: Northwestern Polytechnical University, 2014.
[42] Velex P, Sainsot P. An Analytical Study of Teeth Friction Excitations in Errorless Spur and Helical Gears [J]. Mechanism and Machine Theory, 2002, 37(7): 641−658.
[43] 徐辅仁. 渐开线齿轮机构输出扭矩波动率与齿间滑动摩擦系数及齿数之关系[J]. 机械设计与制造, 2000(5): 37−39.
Xu Fu-ren. The Relationships between the Fluctuation Rate of the Output Torque of the Involute Gearing and Both the Sliding Friction Coefficient between Teeth and Tooth Numbers [J]. Machinery Design and Manufacture, 2000(5): 37−39.
[44] Vaishya M, Singh R. Strategies for Modeling Friction in Gear Dynamics [J]. Journal of Mechanical Design, 2003, 125(2): 383−393.
[45] He S, Singh R. Dynamic Transmission Error Prediction of Helical Gear Pair Under Sliding Friction Using Floquet Theory[J]. Journal of Mechanical Design, 2008,130(5): 052603- 1−052603-9.
[46] He S, Rook T, Singh R. Construction of Semianalytical Solutions to Spur Gear Dynamics Given Periodic Mesh Stiffness and Sliding Friction Functions [J]. Journal of Mechanical Design, 2008, 130(12): 122601-1−122601-9.
[47] Elena Garcia Pablo Gonzalez de Santos, Carlos Canudas de Wit. Velocity Dependence in the Cyclic Friction Arising with Gears [J]. The International Journal of Robotics Research, 2002, 21(9): 761−771.
[48] 李文良, 王黎钦, 常山, 戴光昊. 斜齿轮齿面摩擦力对动力学的弯曲效应[J]. 船舶力学, 2013, 17(8): 937−943.
Li Wen-liang, Wang Li-qin, Chang Shan, Dai Guang-hao. Tooth Friction Bending Effect of Helical Gear on Gear Dynamics [J]. Journal of Ship Mechanics, 2013, 17(8): 937−943.
[49] Iida H, Tamura A, Yamada Y. Vibrational Characteristics of Friction Between Gear Teeth [J]. Bull. JSME, 1985, 28(241): 1512−1519.
[50] 张靖, 陈兵奎, 康传章, 吴长鸿. 计及齿面摩擦的直齿轮动力学分析[J]. 振动与冲击, 2012, 31(21): 126−132.
Zhang Jing, Chen Bing-kui, Kang Chuan-zhang, Wu Chang-hong. Dynamic Analysis for Spur Gears Considering Friction Effect [J]. Journal of Vibration and Shock, 2012, 31(21): 126−132.
[51] Sundar S, Singh R, et. al. Effect of the Tooth Surface Waviness on the Dynamics and Structure-Borne Noise of a Spur Gear Pair [J]. Journal of Passenger Cars – Mechanical System 2013, 6(2): 1087-1093.
[52] Kuang J H, Lin A D. The Effect of Tooth Wear on the Vibration Spectrum of a Spur Gear Pair [J]. Journal of Vibration and Acoustics, 2001, 123: 311−317.
[53] Jiang H, Shao Y, Mechefske C. K. Dynamic Characteristics of Helical Gears under Sliding Friction with Spalling Defect [J]. Engineering Failure Analysis, 2014, 39: 92−107.
[54] Howard I, Jia S, Wang J. The Dynamic Modelling of a Spur Gear in Mesh Including Friction and a Crack [J]. Mechanical Systems and Signal Processing, 2001, 15(5): 831−853.
[55] 陆凤霞，王浩飞，朱如鹏，等.基于齿面摩擦的人字齿轮副动力学特性分析[J]. 振动与冲击, 2016, 35(9): 204-212.
LU Feng-xia, WANG Hao-fei, ZHU Ru-peng, et al. Dynamic characteristics analysis of double helical gear paris considering teeth surface sliding friction [J]. Journal of Vibration and Shock, 2016, 35(9): 204-212.
[56] 王三民, 沈允文, 董海军. 含摩擦和间隙直齿轮副的混沌与分叉研究[J]. 机械工程学报, 2002, 38(9): 8−11.
Wang San-min, Shen Yun-wen, Dong Hai-jun. Chaos and Bifurcation Analysis of a Spur Gear Pair with Combined Friction and Clearance [J]. Chinese Journal of Mechanical Engineering, 2002,38(9): 8−11.
[57] Wang J, Zheng J, Yang A. An Analytical Study of Bifurcation and Chaos in a Spur Gear Pair with Sliding Friction [J]. Procedia Engineering, 2012, 31: 563−570.
[58] 郜浩冬, 张以都. 含摩擦的汇流传动齿轮非线性动力学分析[J]. 振动、测试与诊断,2014,34(4):737−782.
Gao Hao-dong, Zhang Yi-du. Nonlinear Dynamics Analysis of Convergent Transmission Gear Containing Friction [J]. Journal of Vibration, Measurement and Diagnosis, 2014, 34(4):737−782.
[59] 陈思雨, 唐进元. 间隙对含摩擦和时变啮合刚度的齿轮系统动力学响应的影响[J]. 机械工程学报, 2009, 45(8): 119−124.
Chen Si-yu, Tang Jin-yuan. Effect of Backlash on Dynamics of Spur Gear Pair System with Friction and Time-varying Stiffness [J]. Journal of Mechanical Engineering, 2009, 45(8): 119−124.
[60] 刘长钊, 秦大同, 廖映华. 考虑齿面变摩擦系数的斜齿轮传动变速过程动力学分析[J]. 振动与冲击, 2014, 33(24): 150−157.
Liu Chang-zhao, Qin Da-tong, Liao Ying-hua. Dynamic Model for a Parallel-axis Helical Gears Transmission System Based on Variable Friction Coefficient between Contact Teeth [J]. Journal of Vibration and Shock, 2014, 33(24): 150−157.
[61] Chen S, Tang J, Luo C, Wang Q. Nonlinear Dynamic Characteristics of Geared Rotor Bearing Systems with Dynamic Backlash and Friction [J]. Mechanism and Machine Theory, 2011, 46(4): 466−478.
[62] Li X, Sun D, Liang Y, Wang D. Stability Study of Gear Meshing Area Considering Friction of Tooth Surface [J]. International Journal of Industrial and Systems Engineering, 2016, 22(4): 466−483.
[63] Saghafi A, Farshidianfar A. An Analytical Study of Controlling Chaotic Dynamics in a Spur Gear System [J]. Mechanism and Machine Theory, 2016, 96: 179−191.
[64] 张立军, 刁坤, 孟德建, 庞明. 摩擦引起的振动和噪声的研究现状与展望[J]. 同济大学学报（自然科学版）,2013, 41(5):765−772.
[65] Wang D W, Mo J L, Wang Z G, Chen G X, Ouyang H, Zhou Z R. Numerical Study of Friction-induced Vibration and Noise on Groove-textured Surface [J]. Tribology International 2013, 64:1-7.
[66] Theodossiades S, M. De la Cruz, Rahnejat H. Prediction of Airborne Radiated Noise from Lightly Loaded Lubricated Meshing Gear Teeth [J]. Applied Acoustics, 2015, 100: 79−86.
[67] Kim S, Singh R. Gear Surface Roughness Induced Noise Prediction Based on a Linear Time-varying Model with Sliding Friction [J]. Journal of Vibration and Control, 2007, 13(7): 1045−1063.
[68] Aziz S, Seireg A. A Parametric Study of Frictional Noise in Gears [J]. Wear, 1994, 176: 25−28.
[69] He S, Singh R, Pavic G. Effect of Sliding Friction on Gear Noise Based on a Refined Vibro-acoustic Formulation [J]. Noise Control Engineering Journal, 2008, 56(3): 164−175.
[70] Akay A. Acoustics of Friction [J]. Journal of the Acoustical Society of America, 2002, 111(4): 1525−1548.
[71] Choy F K, Zakrajsek J J, et. al. Vibration and Noise Analysis of a Gear Transmission System, NASA Technical Memorandum 106162.
[72] Rebbechi B, Oswald F B, Townsend D P. Measurement of Gear Tooth Dynamic Friction [C]. ASME Power Transmission and Gearing Conference proceedings, 1996, 88: 355−363.