Parametric recognition for a vibration isolation system with nonlinear stiffness and nonlinear damping
HU Guang-shen1, LU Ze-qi1,CHEN Li-qun1
1. Shanghai Municipal Institute of Applied Mathematics & Mechanics, Shanghai University, Shanghai 200072, China;
2. Department of Mechanics, Shanghai University, Shanghai 200444, China;
3. Key Lab for Application of Mechanics in Power Engineering, Shanghai University, Shanghai 200072, China
Aiming at vibration systems with nonlinear stiffness and nonlinear damping, two parametric identification methods were proposed. The first method was based on vibration amplitude jumping phenomenon in a nonlinear vibration system, the system was excited with a swept-sine excitation, frequency and amplitude of the amplitude-jumping point’s displacement were obtained through measurement, then the harmonic balance method was used to recognize the nonlinear vibration system’s stiffness and damping. The second method was involved in the time domain transient response of a nonlinear system, Hilbert transformation was used to gain the free vibration response’s amplitude and phase angle of the system, then combining with the analytical solution to the system excited with a transient excitation, the system’s nonlinear stiffness and nonlinear damping were recognized. Taking a vibration isolation system with nonlinear stiffness and nonlinear damping as an example, the two methods mentioned above were verified through numerical simulation. It was shown that the parametric recognition results using these two methods agree well each other. The study results provided a theoretical guide for parametric identification of vibration isolation systems with nonlinear stiffness and nonlinear damping.
胡广深1，陆泽琦1，陈立群1,2,3. 非线性阻尼非线性刚度隔振系统参数识别[J]. 振动与冲击, 2018, 37(9): 68-73.
HU Guang-shen1, LU Ze-qi1,CHEN Li-qun1. Parametric recognition for a vibration isolation system with nonlinear stiffness and nonlinear damping. JOURNAL OF VIBRATION AND SHOCK, 2018, 37(9): 68-73.
[1] 傅志方. 振动模态分析与参数辨识[M]. 北京: 机械工业出版社,1990.
[2] 李晶, 曹登庆. 基于解析模态分解和希尔伯特变换的模态参数辨识新方法[J]. 振动与冲击,2016, 35(1): 34-39.
LI Jing, CAO Deng-qing. A new method for modal parameter identification based on analytical modal decompositon and Hillbert transformation[J].Journal of Vibration and Shock, 2016, 35(1): 34-39.
[3] 杨凯,于开平. 基于信号时频分析理论识别时变模态参数实验[J]. 振动、测试与诊断, 2015, 35(5): 880-884.
YANG Kai,YU Kai-ping. Experiment on time-varying modal parameter identification based on signal time-frequency analysis theory [J]. Journal of Vibration , measurement and Diagnosis, 2015, 35(5): 880-884.
[4] 尹帮辉, 王敏庆. 结构振动阻尼测试的衰减法研究[J]. 振动与冲击,2014,33(4):100-106
LI Hui, SUN Wei. Damping identification for stiffness -nonlinearity structure[J]. Journal of Vibration and Shock, 2014,33(4):100-106
[5] 孙伟, 齐飞. 基于自由振动衰减信号包络线法辨识硬涂层复合结构阻尼特性[J]. 振动与冲击,2013, 32(12): 50-54.
SUN Wei, QI Fei. Estimating system damping for a hard coating composite structure based on envelope of a free damped vibration signal[J]. Journal of Vibration and Shock, 2013, 32(12): 50-54.
[6] Carrella A, Brennan MJ. On the force transmissibility of a vibration isolator with quasi-zero-stiffness[J]. Journal of Sound and Vibration, 2009, 322(4-5):707-717.
[7]Carrella A, Brennan MJ. Force and displacement transmissibility of a nonlinear isolator with high-static-low-dynamic-stiffness [J]. International Journal of Mechanical Sciences, 2012, 55(1): 22-29.
[8] Brennan MJ, Carrella A. On the jump-up and jump-down frequencies of the Duffing oscillator[J]. Journal of Sound and Vibration, 2008, 318(4): 1250-1261.
[9] Brosch T, Neumann H. A comparison of the effects of nonlinear damping on the free vibration of a single-degree-of-freedom system[J]. Journal of Vibration and Acoustics, 2012, 134(1): 81-84
[10] TANG Bin, Brennan MJ. A comparison of two nonlinear damping mechanism in a vibration isolator[J]. Journal of Sound and Vibration, 2013, 332(3): 510-520.
[11] TANG Bin, Brennan MJ. Experimental characterization of a nonlinear vibration absorber using free vibration [J]. Journal of Sound and Vibration, 2016, 367(1): 159-169.
[12]Feldman M. Hilbert transform in vibration analysis [J]. Mechanical Systems and Signal Processing, 2011, 25(1): 735-802.
[13] Feldman M. Non-linear system vibration analysis using Hilbert Transform I: Free vibration analysis method FREEVIB[J].Mechanical Systems and Signal Processing,1994, 8(2): 119-127.
[14] 李晖, 孙伟. 具有刚度非线性的结构系统阻尼参数测试[J]. 振动与冲击,2015, 34(9): 131-135.
LI Hui, SUN Wei. Damping identification for stiffness -nonlinearity structure[J]. Journal of Vibration and Shock, 2015, 34(9): 131-135.
[15] 邓杨, 彭志科. 基于参数化时频分析的非线性振动系统参数辨识[J]. 力学学报,2013, 45(6): 992-996.
DENG Yang, Peng Zhi-ke. Identification of nonlinear vibration systems based on parametric TFA [J]. Chinese Journal of Theoretical and Applied Mechanics, 2013, 45(6): 992-996.
[16] TANG Bin, Brennan MJ. Using Nonlinear Jumps to Estimate Cubic Stiffness Nonlinearity: An Experimental Study[J]. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 2015,0(0):1-7.
[17] Roszaidi R, Brennan MJ. Exploiting knowledge of jump-up and jump-down frequencies to determine the parameters of a Duffing oscillator[J]. Communication in Nonlinear Science Numerical Simulation, 2016, 37(1): 282-291.
