Dynamic model of drill strings considering stochastic frictional effects of well wall
TIAN Jialin1,2, YANG Yinglin1, WU Zhixin1,SHEN Tong1, LI Lei1, YANG Lin1
1.School of Mechatronic Engineering, Southwest Petroleum University, Chengdu 610500, China;
2. School of Mechanical Engineering,Southwest Jiaotong University, Chengdu 610031, China
Aiming at the actual situation of new petroleum resources, the friction stochasticity of well wall and its influence on drill string dynamic behavior were investigated here for studying drill-string dynamic characteristics under more complex formation conditions. Firstly, combined with the actual circumstance of oil-gas wells, the friction behavior of borehole wall was described, and the procedure and methods were proposed to build the random field of borehole wall. Then based on the engineering background of shale gas, the drill-string dynamic model in horizontal wells was established. The solving expressions for forces in the model and the model’s discretization method were derived. At the same time, the basic parameters of examples were determined with test data. The results obtained with different methods were compared and analyzed to verify the correctness of the proposed method. Then key parameters of the model were analyzed quantitatively. The study results provided a reference for further studying drill-string dynamic behaviors under new petroleum resources exploitation conditions, and a theoretical guidance for safety production of down hole, the methods to improve rate of penetration (ROP) and efficiency, and tools development. They were valuable for the field production.
田家林1,2, 杨应林1,杨琳1,吴志鑫1,申彤1,李蕾1. 考虑井壁摩擦随机性的钻柱动力学模型[J]. 振动与冲击, 2018, 37(11): 252-258.
TIAN Jialin1,2, YANG Yinglin1, WU Zhixin1,SHEN Tong1, LI Lei1, YANG Lin1. Dynamic model of drill strings considering stochastic frictional effects of well wall. JOURNAL OF VIBRATION AND SHOCK, 2018, 37(11): 252-258.
[1] Xue, Qilong, et al. "Dynamic Measurement of Spatial Attitude at Bottom Rotating Drillstring: Simulation, Experimental, and Field Test." Journal of Energy Resources Technology 138.2 (2016): 022903.
[2] Ghasemloonia, Ahmad, D. Geoff Rideout, and Stephen D. Butt. "A review of drillstring vibration modeling and suppression methods." Journal of Petroleum Science and Engineering 131(2015): 150-164.
[3] Kapitaniak, Marcin, et al. "Unveiling complexity of drill–string vibrations: Experiments and modelling." International Journal of Mechanical Sciences101 (2015): 324-337.
[4] 赵丽娟, 田震. 薄煤层采煤机振动特性研究[J]. 振动与冲击, 2015, 34(1):195-199.
Zhao, Lijuan,Tian Zhen. Vibration characteristics of thin coal seam shearer. Encyclopedia of Clinical Neuropsychology. Springer New York, 2015:2342-2342.
[5] Yang, Mou, et al. "Prediction of wellbore and formation temperatures during circulation and shut-in stages under kick conditions." Energy 91 (2015): 1018-1029.
[6] Albdiry, M. T., and M. F. Almensory. "Failure analysis of drillstring in petroleum industry: A review." Engineering Failure Analysis 65 (2016): 74-85.
[7] Mongkolcheep, Kathira, Annie Ruimi, and Alan Palazzolo. "Modal Reduction Technique for Predicting the Onset of Chaotic Behavior due to Lateral Vibrations in Drillstrings." Journal of Vibration and Acoustics 137.2 (2015): 021003.
[8] 靳红玲, 陈建军, 赵宽,等. 含随机参数的空间柔性梁动力学模型[J]. 振动与冲击, 2014(14):6-10.
Jin, H. L., et al. "Uncertainty dynamic modeling of spatial flexible beam with probabilistic parameters." Zhendong Yu Chongji/journal of Vibration & Shock 33.14(2014):6-10.
[9] 张佳文, 郭文华, 项超群. 基于协方差本征变换与谐波合成法的随机风场模拟[J]. 振动与冲击, 2013, 32(21):197-203.
Zhang, Jia Wen, W. H. Guo, and C. Q. Xiang. "Simulation of stochastic wind field based on covariance proper transformation and weighted amplitude wave superposition." Zhendong Yu Chongji/journal of Vibration & Shock 32.21(2013):197-203.
[10] Yang, Jinzhong, Dongxiao Zhang, and Zhiming Lu. "Stochastic analysis of saturated–unsaturated flow in heterogeneous media by combining Karhunen-Loeve expansion and perturbation method." Journal of Hydrology 294.1 (2004): 18-38.
[11] 刘颖, 杨绿峰, 莫远昌. "基于随机响应面法的结构可靠度研究." 广西大学学报: 自然科学版 33.4 (2008): 366-369.
Liu Ying, Yang Lvfeng, Mo Changyuan. " The structural reliability research based on the stochastic response surface method."Journal of Guangxi University: Natural Science Version 33.4 (2008) : 366-369.
[12] Ritto, T. G., et al. "Drill-string horizontal dynamics with uncertainty on the frictional force." Journal of Sound and Vibration 332.1 (2013): 145-153.
[13] Depouhon, Alexandre, and Emmanuel Detournay. "Instability regimes and self-excited vibrations in deep drilling systems." Journal of Sound and Vibration 333.7 (2014): 2019-2039.
[14] Franca, Luiz FP. "Drilling action of roller-cone bits: modeling and experimental validation." Journal of Energy Resources Technology 132.4 (2010): 043101.
[15] Ritto, T. G., Rubens Sampaio, and F. A. Rochinha. "Model uncertainties of flexible structures vibrations induced by internal flows." Journal of the Brazilian Society of Mechanical Sciences and Engineering 33.3 (2011): 373-380.