A study on dynamic characteristics of flexure pivot tilting pad bearings
YANG Qijiang1,2，LI Weiguang2，ZHAO Xuezhi2，GUO Mingjun2
1.School of Marine Engineering, GuangZhou Maritime University, Guangzhou 510725, China;
2.School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China
The analysis includes the oil film inertia and viscosity temperature effects.Based on the pad force equilibrium equations and the differential equations of motion, the dynamic model of the flexible bearing tilting pad bearing is was established.In this paper, an iterative calculation method to determine the flexure pivot tilting pad that bears the static equilibrium position is was proposed.The PDE toolbox was used to solve the static and frequency disturbance pressure Reynolds equation The Newton-Raphson iteration method could be used to calculate the static equilibrium position of the journal and the pad.The simulation results were compared with the experimental data, and the dynamic model and simulation method are verified.
杨期江1 李伟光2 赵学智2 郭明军2. 挠性支承可倾瓦轴承动力特性研究[J]. 振动与冲击, 2018, 37(16): 111-117.
YANG Qijiang1,2，LI Weiguang2，ZHAO Xuezhi2，GUO Mingjun2. A study on dynamic characteristics of flexure pivot tilting pad bearings. JOURNAL OF VIBRATION AND SHOCK, 2018, 37(16): 111-117.
[1] Richard W. Armentrout, Donald J. Paquette. Rotordynamic characteristics of flexure-pivot tilting-pad journal bearings[J]. Tribology Transactions, 1993, 36(3):443-451.
[2] Kepple W E, Read D W. EXPERIENCE IN THE USE OF FLEXURE PIVOT TILT PAD BEARINGS IN BOILER FEEDWATER PUMPS[J]. 1998:77-83.
[3] Zeidan F Y, Developments in Fluid Film Bearing Technology[J]. Turbomachinery International, 1992, pp. 24-31.
[4] Chen W J, Zeidan F Y and Jain D. Design Analysis, and Testing of High Performance Bearings in a High Speed Integrally Geared Compressor[C]. Proceedings of the 23rd Turbomachinery Symposium, Dallas, 1994,pp. 31-42.
[5] DeChoudhury P, Hill M R and Paquette D J. A Flexible Pad Bearing System for High Speed Centrifugal Compressor[J]. Proceeding of 21st Turbomachinery Symposium, Dallas, 1992, pp. 57-64.
[6] Andrés L S, Santiago O D. Imbalance Response of a Rotor Supported on Flexure Pivot Tilting Pad Journal Bearings in Series With Integral Squeeze Film Dampers[J]. Journal of Engineering for Gas Turbines & Power, 2001, 125(4):V004T03A023-V004T03A023.
[7] Vance J, Zeidan F, Murphy B. Machinery Vibration and Rotordynamics[M]. Wiley, 2010.
[8] Sim K H. Rotordynamic and thermal analyses of compliant flexure pivot tilting pad gas bearings[J]. Dissertations & Theses - Gradworks, 2007.
[9] AndréS L S. Hybrid Flexure Pivot-Tilting Pad Gas Bearings: Analysis and Experimental Validation[J]. Journal of Tribology, 2006, 128(3):551-558.
[10] Rimpel A, Kim D. Rotordynamic Performance of Flexure Pivot Tilting Pad Gas Bearings With Vibration Damper[J]. Journal of Tribology, 2009, 131(2).
[11] Feng K, Liu W, Zhang Z, et al. Theoretical model of flexure pivot tilting pad gas bearings with metal mesh dampers in parallel[J]. Tribology International, 2016, 94:26-38.
[12] Andres L S. Notes 07. Thermal analysis of finite length journal bearings including fluid inertia[J]. [17], 2009.
[13] 张直明. 滑动轴承的流体动力润滑理论[M]. 高等教育出版社, 1986.
[14] Wen J C. Bearing Dynamic Coefficients of Flexible-Pad Journal Bearings[J]. Tribology Transactions, 1995(2):253-260.
[15] Agnew J S. Rotordynamic Performance of a Flexure Pivot Pad Bearing with Active and Locked Integral Squeeze Film Damper Including Predictions[D]. Texas A&M University, 2011.
[16] Al-Ghasem A M. Measurement of rotordynamic coefficients for a high-speed flexure pivot tilting-pad bearing(load between pad) configuration[J]. Texas A & M University, 2006.
[17] 杨期江. 柔性阻尼支承可倾瓦轴承油膜动力及减振特性研究[D]. 华南理工大学, 2016.
