Numerical simulation for influences of fragment impact positions on-anti-penetration performance of UHMWPE plate
FANG Zhiwei1,2, HOU Hailiang1, LI Dian1, ZHU Xi1, HU Nianming1
1.College of Naval Architecture and Ocean Engineering, Naval University of Engineering,-Wuhan 430033, China;
2.Unit 91189 of PLA, Lianyungang 222041, China
Abstract:UHMWPE plate has excellent anti-penetration performance and usually needs to be cut into a certain size and then spliced and installed again in actual application.When high-speed fragments produced by implosion of semi-armor-piercing missiles penetrate UHMWPE plates in cabin of warship, their impact positions are random.Here, numerical simulation was used to study effects of fragment impact positions, fragment velocity and fragment length-diameter ratio on the anti-penetration performance of spliced UHMWPE plates.Result showed that when fragments start to impact a UHMWPE plate, fiber shear failure appears on the plate under combined action of bending moment and shear stress; when fragments continue to penetrate the plate, fiber tensile fracture failure occurs with a serious delamination phenomenon on the plate; when fragments penetrate two spliced plates with lower impact velocity (less than 1 000 m/s), the two spliced UHMWPE plates have an obvious anti-missile weak area, and the area is about three times of fragment radius; when fragments penetrate four spliced UHMWPE plates, the target plates can be divided into weak, sub-weak and normal areas; when UHMWPE plates are spliced and installed, considering sizes of fragments produced by implosion of semi-armor-piercing missiles and the convenience of installation processing, a 10 cm range on both sides of the splicing joint should be strengthened as an anti-missile weak area.
方志威1,2,侯海量1,李典1,朱锡1,胡年明1. 破片着靶点位置对拼接的UHMWPE板抗侵彻性能影响数值研究[J]. 振动与冲击, 2018, 37(21): 22-28.
FANG Zhiwei1,2, HOU Hailiang1, LI Dian1, ZHU Xi1, HU Nianming1. Numerical simulation for influences of fragment impact positions on-anti-penetration performance of UHMWPE plate. JOURNAL OF VIBRATION AND SHOCK, 2018, 37(21): 22-28.
[1] Lee B L,Song J W,Ward J E.Failure of spectra polyethylene fiber-reinforced composites under ballistic impact loading [J].Journal of Composite Materials,1994,28(13):1202-1226.
[2] Walsh T F,Lee B L,Song J W.Penetration failure of spectra polyethylene fiber-reinforced ballistic-grade composites[J].Key Engineering Materials,1998(141-143):367-382.
[3] 孙志杰,张佐光,沈建明.UD75防弹板工艺参数与弹道性能的初步研究[J].复合材料学报,2001,18(2):46-49.
SUN Zhijie,ZHANG Zuoguang,SHEN Jianming.Preliminary study on the process parameters and ballistic properties of UHMWPE fiber composite laminates[J].Acta Materiae Compositae Sinica,2001,18(2):46-49.(in Chinese)
[4] M.J.N.Jacobs,J.L.J.Van Dingenen.Ballistic protection mechanisms in personal armor[J].Journal of Materials Science,2001(36):3137-3142.
[5] 梁子青,周 庆,邱冠雄.超高分子量聚乙烯纤维防弹复合材料的研究[J].天津工业大学学报,2003,22(2):6-9.
LIANG Zi-qing,ZHOU Qing,QIU Guan-xiong.Study on ultra-high molecular weight polyethylene anti-ballistic composites[J].Journal of Tianjin Polytechnic University,2003,22(2):6-9.(in Chinese)
[6] M.Grujicic,G.Arakere.A ballistic material model for cross-plied unidirectional ultra-high molecular-weight polyethylene fiber-reinforced armor-grade composites[J].Materials Science and Engineering A,2008(498):231-241.
[7] Adnan Fazal,Kevin S. Fancey.UHMWPE fibre-based composites:prestress-induced enhancement of impact properties[J].CompositePart B,66(2014):1-6.
[8] 胡年明,朱 锡,侯海量.高速破片侵彻下高分子聚乙烯层合板的弹道极限估算方法[J].中国舰船研究,2014,9(4):55-62.
HU Nian-ming,ZHU Xi,Hou Hailiang.Estimating method for the ballistic limit of ultra-high weight polyethylene fiber-reinforced laminates under high-velocity fragment penetration[J].Chinese Journal of Ship Research,2014,9(4):55-62.(in Chinese)
[9] J.A. Pueryolas,F.J. Pascual,M.J. Martinez-Morlanes. Impact resistance and fractography in ultra molecular weight polyethylenes[J].Journal of the Mechanical Behavior of biomedical Materials,30(2014):111-122.
[10] Torsten Lassig, Frank Bagusat, Michael May, Stefan Hiermaier. Analysis of the shock response of UHMWPE composites using the inverse planar plate impact test and the shock reverberation technique[J]. International Journal of Impact Engineering,86(2015):240-248.
[11] Alex J. Hsieh, Tanya L.Chantawansri, Weiguo Hu, Jason Cain, Jian H.New insight into the influence of molecular dynamics of matrix elastomers on ballistic impact deformation in UHMWPE composites[J].Polymer,95(2016):52-61.
[12] 顾冰芳, 龚烈航, 徐国跃. UHMWPE纤维复合材料防弹和性能[J]. 纤维复合材料,2006, 3(1) : 20-23.
GU Bingfang,GONG Liehang,XU Guoyue. Ballistic resistance mechanism and performance of UHMWPE composites[J]..Fiber Composites,2006(1):20-23.(in Chinese)
[13] 王晓强,朱 锡,梅志远.超高分子量聚乙烯纤维增强层合厚板抗弹性能实验研究[J]. 爆炸与冲击,2009,29:29-34.
WANG Xiao-qiang, ZHU Xi, MEI Zhi-yuan.Ballistic performances of ultra-high molecular weight polyethylene fiber-reinforced thick laminated plates[J]. Explosion and Shock Waves,2009,29(1):29-34.(in Chinese)
[14] 陈 昕,朱 锡,梅志远,王晓强.UHMWPE球面层合板弹道侵彻性能研究[J].振动与冲击,2011,30(4):
119-123.
CHEN Xin, ZHU Xi, MEI ZHiyuan, Wang Xiaoqiang.
Ballistic penetration properties of UHMWPE spherical laminate[J].Journal of Vibration and Shock,2011,30(4):119-123.(in Chinese)
[15] 李 伟,李 晶,叶 勇.UHMWPE纤维层合板防弹性能数值分析研究[J].兵器材料科学与工程,2012,35(4):84-87.
LI Wei,LI Jing,YE Yong.Numerical analysis on ballistic performance of UHMWPE fiber laminate[J].
Ordnance Material Science and Engineering,2012,35(4):84-87.(in Chinese)
[16] Timothy G.Zhang, Sikhanda S.Satapathy, Lionel R. Vargas-Gonzalez, Shawn M. Walsh.Ballistic impact response of Ultra-High-Molecular-Weight Polyethylene (UHMWPE)[J]. Composite Structures, 133(2015): 191~201.
[17] 张 鹏,王志军,马武伟,王绪财,张雁思.高速弹体侵彻钢/陶瓷/超高分子量聚乙烯纤维/钢实验[J].兵器材料科学与工程,2016,39(5):104-108.
ZHANG Peng, Wang Zhi-jun, MA Wu-wei,WANG Xu-cai,ZHANG Yan-si.Experiment on high velocity projectile penetrating composite target of steel /ceramic/ ultra-high molecular weight polyethylene fiber/ steel [J].Ordnance Material Science and Engineering, 2016, 39(5):104-108.(in Chinese)