设备-结构动力相互作用振动台试验方法研究

摘要
图/表
参考文献(17)
相关文章 (15)

全文: PDF (1953 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为了合理评估设备与结构的抗震性能，本文开展设备-结构动力相互作用振动台试验方法研究。首先按照分支子结构方法推导设备-结构动力相互作用运动方程，提出了考虑设备-结构动力相互作用振动台实时子结构试验方法，该方法将设备作为试验子结构由振动台加载同时结构作为数值子结构由仿真软件计算联合进行振动台试验，能够考虑设备-结构相互作用对设备抗震性能的影响。然后设计了四层的钢框架设备-结构动力相互作用缩尺模型，进行各地震动作用下的振动台实时子结构试验与传统整体振动台试验。通过比较发现两种试验方法得到的结果基本吻合在一起，证明本文提出的振动台实时子结构方法是可靠有效的。试验分析表明忽略设备-结构动力相互作用将影响结构或设备真实的地震反应，特别是对于设备反应的影响更显著。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	姜忻良1
	张崇祥1
	姜南1
	唐贞云2

关键词 ：分支子结构, 试验子结构, 数值子结构, 设备-结构动力相互作用, 振动台

Abstract：Here, shaking table test method for equipment-structure dynamic interaction was investigated to reasonably evaluate the aseismic performance of equipment and structure.Firstly, adopting the branch substructure method, the equip-structure dynamic interaction motion equation was deduced.A shaking table real-time substructure test method for equipment-structure dynamic interaction was proposed.With this method, the equipment was taken as the test substructure loaded by the shaking table and the structure was taken as the numerical substructure calculated using simulation software to jointly conduct shaking table tests and be able to consider effects of equipment-structure interaction on the equipment’s aseismic performance.A 4-floor steel frame equipment-structure interaction scaled model was designed, and the shaking table real-time substructure test and the traditional whole shaking table one were conducted for the model under different earthquake excitations.Comparing the two test results showed that they agree well with each other; the validity of the proposed shaking table real-time substructure test method is verified; ignoring the equipment-structure dynamic interaction affects the actual seismic responses of structure and equipment, especially, the latter is affected more significantly.

Key words： branch substructure experimental substructure numerical substructure equipment-structure interaction shaking table

收稿日期: 2017-07-25 出版日期: 2019-01-28

引用本文:

姜忻良1，张崇祥1，姜南1，唐贞云2. 设备-结构动力相互作用振动台试验方法研究[J]. 振动与冲击, 2019, 38(3): 108-115.
JIANG Xinliang1, ZHANG Chongxiang1, JIANG Nan1, TANG Zhenyun2. Shaking table test method for equipment-structure dynamic interaction. JOURNAL OF VIBRATION AND SHOCK, 2019, 38(3): 108-115.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2019/V38/I3/108

[1] 姜忻良, 张崇祥. 考虑局部非线性影响的设备-结构相互作用研究[J]. 振动与冲击, 2016, 35(16):106-113.
Jiang XL, Zhang CX. The study of equipment-structure interaction considering the effect of local nonlinearity[J]. Journal of Vibration and Shock, 2016, 35(16):106-113.
[2] 李杰, 陈淮, 孙增寿. 结构-设备动力相互作用试验研究[J]. 工程力学, 2003, 20(01):157-161+85.
Li J, Chen H and Sun ZS. Shaking table tests on spatial structure-equipment model systems[J]. Engineering Mechanics, 2003, 20(1): 157-158 (In Chinese).
[3] Wang X, Astroza R, Hutchinson T C, et al. Dynamic characteristics and seismic behavior of prefabricated steel stairs in a full–scale five–story building shake table test program[J]. Earthquake Engineering and Structural Dynamics, 2015, 44(14): 2507-2527.
[4] 朱丽华, 李窍, 张现宾等. 地震作用下结构-设备耦合体系动力相互作用研究[J]. 世界地震工程, 2017, 33(2):64-70.
Zhu LH, Li Q, Zhang XB et al. Study on dynamic interaction of structure-equipment coupled system under earthquake action [J]. World Earthquake Engineering, 2017, 33(2):64-70.
[5] Mosqueda G, Retamales R, Filiatrault A, Reinhorn A. Testing facility for experimental evaluation of non-structural components under full-scale floor motions[J]. Struct. Design Tall Spec. Build., 2009, 18(4): 387-404.
[6] Nakashima M, Kato H, Takaoka E. Development of Real-time Pseudo Dynamic Testing[J]. Earthquake Engineering & Structural Dynamics, 1992, 21(1): 79-92.
[7] Wang Q, Wang J, Jin F, et al. Real-time dynamic hybrid testing for soil–structure interaction analysis[J]. Soil Dynamics and Earthquake Engineering, 2011, 31(12): 1690-1702.
[8] Lee S K, Park E C. Real-time substructuring technique for the shaking table test of upper substructures[J]. Engineering Structures, 2007, 29(9):2219–2232.
[9] Zhang R, Lauenstein P V, Phillips B M. Real-time hybrid simulation of a shear building with a uni-axial shake table[J]. Engineering Structures, 2016, 119:217-229.
[10] 姜忻良, 严士超. 分枝模态二步分析法及其在液体-结构-桩土体系中的应用[J]. 振动工程学报, 1994, 7(4):346-351.
Jiang XL and Yan SC. Two step method of the branched modal and its use for liquid-structure-pile-soil interaction system[J]. Journal of Vibration Engineering, 1994, 7(4):346-351 (In Chinese).
[11] 王菲, 姜南. 土-结构三维动力分析的线性-非线性混合子结构法[J]. 工程力学, 2012, 29(1):155-161.
Wang F, Jiang N. 3D dynamic analysis of soil-structure interaction system based on mixed linear-nonlinear substructure method[J]. Engineering Mechanics, 2012, 29(1):155-161 (In Chinese).
[12] 邓利霞, 范武. 基于Popov超稳定理论的实时子结构试验MRAC控制与仿真[J]. 振动与冲击, 2016, 35(21):42-46.
Deng LX, Fan W. MRAC control and simulation for real-time substructure testing based on Popov hyperstability theory[J]. Journal of Vibration and Shock, 2016, 35(21):42-46.
[13] 许国山, 吴斌. 弹性试件的实时子结构试验等效力控制方法[J]. 振动与冲击, 2010, 29(5):101-105.
Xu GS, Wu B. Equivalent force control method for real-time substructure testing with elastic specimen[J]. Journal of Vibration and Shock, 2010, 29(5):101-105.
[14] 周惠蒙, 吴斌. 采用滑动模态控制器的实时子结构试验等效力控制方法[J]. 振动与冲击, 2012, 31(7):27-33.
Zhou HM, Wu B. Equivalent force control method with sliding mode controller for real-time substructure test[J]. Journal of Vibration and Shock, 2012, 31(7):27-33.
[15] Tagawa Y, Tu J, Stoten DP, et al. Inverse dynamics compensation via simulation of feedback control systems (IDCS)[J]. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2011, 225(1): 137-153.
[16] Guo J, Tang ZY, Chen SC, Li ZB. Control strategy for the substructuring testing systems to simulate soil-structure interaction[J]. Smart structures and systems, 2016, 18(6): 1169-1188.
[17] MathWorks. Optimization toolbox user’s guide[M]. The MathWorks, 2015.