Influence of blade profile on the hydraulic and rotating noise characteristics of a jet centrifugal pump
GUO Rong1 LI Rennian1,2 ZHANG Renhui1,2 LI Jing1 SHEN Zhengjing1,2
1. School of Energy and Power Engineering, Lanzhou University of technology, Lanzhou ,730050, China；
2. Key Laboratory of Fluid Machinery and Systems, Gansu Province, Lanzhou, 730050, China
Abstract：To study the effect of blade profile on the hydraulic and rotational noise characteristics of a jet centrifugal pump(JCP) and improve the design level of JCP impeller, the high order Bezier curve was applied to the parametric control of the blade profile.The sensitivity analysis and screening of parameters were accomplished using the Plackett-Burman method.The central composite experiment design of 3 the most sensitive control variables was accomplished based on the response surface method.A multiple regression model between the blade profile and the efficiency, head, shaft power and rotational noise was established,and the mapping relationship between hydraulic and acoustic properties was confirmed.It is shown that the blade wrap angle, outlet angle, and inlet diameter have the most significant influences on hydraulic and acoustic performances.Smaller wrap angle, larger outlet angle and smaller inlet diameter are helpful to improve the hydraulic performances,and in the design space, the optimal parameter combination is wrap angle φ=52.5°, outlet angle β2=50°, inlet diameter Dj=14.5.It is helpful to improve the acoustic performances when the coding level of each control parameter is close to 0, and the optimal combination of parameters is wrap angle φ=76°, outlet angle β2=33°, inlet diameter Dj=18.The acoustic and hydraulic properties have the ability to approximate the Pareto solution in the sample space of the blade profile, and the Pareto front solution distributes along a downward convex curve.
郭荣1,李仁年1，2，张人会1，2，李晶1，申正精1，2. 叶片型线影响射流离心泵水力及旋转噪声特性分析[J]. 振动与冲击, 2019, 38(18): 223-230.
GUO Rong1 LI Rennian1,2 ZHANG Renhui1,2 LI Jing1 SHEN Zhengjing1,2. Influence of blade profile on the hydraulic and rotating noise characteristics of a jet centrifugal pump. JOURNAL OF VIBRATION AND SHOCK, 2019, 38(18): 223-230.
[1] Rossi, Mark J. Recognizing Applications That Require Self-
priming Pumps[J]. Plant Engineering, 1985, Vol39(5): 64-66．
[2] 李伟，常浩，刘建瑞等. 射流式自吸离心泵研究现状与前
展望[J].排灌机械工程学报,2016,34(11):947-952+966.
LI Wei, CHANG Hao, LIU Jianrui, et al. Research situation and prospect of jet type self-priming centrifugal pump[J]. Journal of drainage and irrigation machinery engineering, 2016,34(11): 947-952,966.
[3] 刘建瑞，文海罡，高振军，等. 射流喷嘴几何参数对喷灌泵自吸性能的影响[J]. 农业工程学报, 2012,28(24):47-54.
Liu Jianrui, Wen Haigang, Gao Zhenjun, et al. Effects of geometric parameters for jet nozzle on self-priming performance of spray pump[J]. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28 (24) :47-54.
[4] 王洋，韩亚文，朱新新，等. 基于CFD 的射流自吸泵性能优化与试验[J]. 农业工程学报, 2016,32(增刊2):16-21.
Wang Yang, Han Yawen, Zhu Xinxin, et al. Optimization and experiment on performance of flow-ejecting self-priming pump based on CFD[J]. Transactions of the Chinese Society of Agricultural Engineering, 2016, 32(Supp.2): 16－21.
[5] 杨雪龙，龙新平，康勇，等. 扩散器结构与喉管长度对喷射泵性能的影响[J]. 哈尔滨工业大学学报. 2014,46(01):111-
115.
Yang Xuelong, Long Xinping, Kang Yong. Effect of diffuser structure and throat length on jet pump performance[J]. Journal of Harbin Institute of Technology, 2014,46 (1):111-
115.
[6] Shah A, Chughtai I R, Inayat M H. Experimental study of the characteristics of steam jet pump and effect of mixing section length on direct-contact condensation[J]. International Journal of Heat & Mass Transfer, 2013, 58(1-2):62-69.
[7] Ian W Eames. A new prescription for the design of supersonic jet-pumps: the constant rate of momentum change method[J]. Applied Thermal Engineering,2002,22(2).
[8] De Casteljau P. Outillages methods calcul[R]. Technical Report, A. Citron, Paris, 1959.
[9] Bezier P. Example of an existing system in the motor industry[J]. Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, 1971, 321(1545):207-218.
[10] Bezier P. Numerical control mathematics and applications [J]. John Wiley and Sons, London,1972.
[11] Bezier P. The Mathematical Basic of the UNISURF CAD System[J]. Butterworths, England,1986.
[12] 张晓东，余世敏，龚彦，等. 基于Bezier曲线的涡轮叶片参数化造型及优化设计[J].机械强度,2015,37(02):266-271.
ZHANG Xiaodong, YU Shimin, GONG Yan, et al. Modeling and optimization for turbine blades based on Bezier curve[J]. Journal of Mechanical Strength,2015,37(2):266-271.
[13] 司乔瑞，袁寿其，袁建平，等. 基于CFD/CA 的离心泵流动诱导噪声数值预测[J]. 机械工程学报,2013,49(22):177-184.
SI Qiaorui, YUAN Shouqi, YUAN Jianping, et al. Flow-
induced noise calculation of centrifugal pumps based on CFD/CA method[J]. Journal of Mechanical Engineering, 2013,49(22):177-184.
[14 ] 丁剑，刘厚林，王勇，等. 叶片出口角影响离心泵噪声辐射数值研究[J]. 振动与冲击,2014,33(2):122-127.
DING Jian, LIU Houlin, WANG Yong, et al. Numerical study on the effect of blade outlet angle on centrifugal pump noise[J]. Journal of Vibration and Shock,2014,33(2):122-127.
[15] 董亮，代翠，孔繁余，等. 叶片出口安放角对离心泵作透平噪声的影响[J]. 农业工程学报,2015,31(6):69-75.
Dong Liang, Dai Cui, Kong Fanyu, et al. Impact of blade outlet angle on acoustic of centrifugal pump as turbine[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2015,31(6):69-75.
[16] 王孚懋，王建春. 噪声测量中1/3倍频程与倍频程频谱的关系与计算[J].噪声与振动控制,1996(03):39-41.
Wang Fumao, Wang Jianchun. Noise measurement and
calculation of the relationship between one-third octave and octave spectrum[J]. Noise and Vibration Control,1996,5(3): 39-41.
[17] 赵选民.试验设计方法[M]. 北京：科学技术出版社,2006：33－63.
