A study on a base isolation RC frame structure with specially shaped columns designed for seismic fortification intensity 8 zone
SU Hexian1,2, PAN Wen1,2, ZHANG Xingxian3, BAI Yu1,2, GAO Yonglin1,2, YU Mingkun4
1.School of Civil Engineering, Kunming University of Science and Technology , Kunming 650500, China;
2. Earthquake Engineering Researching Center of Yunnan, Kunming 650500, China;
3. Yunan Open University, Kunming 650500, China;
4.Yunnan Academy of Building Research, Kunming 650223, China
The isolation performance of a base seismic isolated RC frame structure with specially shaped columns designed for seismic fortification intensity 8 (0.2 g) zone were investigated through numerical analyses and shaking table test.The base isolation design of RC frame structure with specially shaped columns was compared with that of a RC frame structure with common rectangular columns.A shaking table test was conducted on the model of base seismic isolated RC frame structure with specially shaped columns that satisfied the objective of base isolation design.Results show that the RC frame structure with specially shaped columns tends to have considerable lateral stiffness, which makes it have smaller horizontal seismic decrease coefficient than the RC frame structure with rectangular columns.In addition, the shaking table test shows that the acceleration and displacement responses of base seismic isolated RC frame structure with specially shaped columns are significantly reduced.That is to say, the seismic fortification objective, i.e., buildings are neither damaged when subjected to frequently earthquake influence nor collapsed when subjected to rarely earthquake, has been achieved.Furthermore, the base isolation has been validated to be one of effective ways to enhance the seismic performance of the RC frame structure with specially shaped columns.It should be noted, however, that the weakness of the upper structure should be carefully considered in seismic isolation design, and the development of the plastic state should be constrained to a certain level.In sum, the seismic isolation technique can improve the seismic performance of the RC frame structure with specially shaped columns in seismic fortification intensity 8 (0.2 g) zone, indicating the promising application in high intensity area.
苏何先1,2，潘文1,2，张兴仙3，白羽1,2，高永林1,2，余明坤4. 8度区异形柱框架结构基础隔震研究[J]. 振动与冲击, 2019, 38(20): 154-163.
SU Hexian1,2, PAN Wen1,2, ZHANG Xingxian3, BAI Yu1,2, GAO Yonglin1,2, YU Mingkun4 . A study on a base isolation RC frame structure with specially shaped columns designed for seismic fortification intensity 8 zone. JOURNAL OF VIBRATION AND SHOCK, 2019, 38(20): 154-163.
[1] 混凝土异形柱结构技术规程:JGJ 149-2017[S]. 北京: 中国建筑工业出版社, 2017.
[2] 曹祖同, 陈云霞, 吴戈, 等. 钢筋混凝土异形柱框架节点强度的研究[J]. 建筑结构, 1999, 29(1):42-46.
CAO Zu-tong, CHEN Yun-xia, WU Ge, et al. Study on strength of reinforced concrete frame with special-shaped columns[J]. Building Structure, 1999, 29(1):42-46.
[3] 苏小卒, 张荣, 王磊, 等. 钢筋混凝土异形柱抗震性能的试验研究[J]. 结构工程师, 2007, 23(3):58-64.
SU Xiao-zu, ZHANG Rong, WANG Lei, et al. Experimental study on aseismic behavior of reinforced concrete special shaped columns[J]. Structural Engineers, 2007, 23(3):58-64.
[4] 王铁成, 张学辉, 康谷贻. 两种混凝土异形柱框架抗震性能试验对比[J].天津大学学报, 2007, 40(7):791-798.
WANG Tie-cheng, ZHANG Xue-hui, KANG Gu-yi. Exper-imental comparison of seismic behavior of two RC frames with specially shaped columns[J]. Journal of Tianjin Univer-sity, 2007, 40(7):791-798.
[5] 陈昌宏, 单建, 马乐为, 等. 钢筋混凝土异形柱框架节点抗震性能试验 [J]. 工业建筑, 2007, 37(2):6-10.
CHEN Chang-hong, SHAN Jian, MA Le-wei, et al. Aseis-mic performance experiment on the special-shaped column frame structures joints of reinforced concrete[J]. Industrial Construction, 2007, 37(2):6-10.
[6] 李杰, 肖建庄, 陈建兵, 等. 钢筋混凝土异形柱结构振动台试验研究[J]. 土木工程学报, 2002, 35(3):7-12.
LI Jie, XIAO Jian-zhuang, CHEN Jian-bing, et al. Exper-imental study on RC structures with special-shaped col-umns[J]. China Civil Engineering Journal, 2002, 35(3):7-12.
[7] 刘军进, 吕志涛, 冯健. 9层(带转换层)钢筋混凝土异形柱框架结构模型振动台试验研究[J]. 建筑结构学报, 2002, 23(1):21-26.
LIU Jun-jin, LU Zhi-tao, FENG Jian. Study on shaking table test of a 9-storey RC frame model with specially shaped col-umns and transfer storey[J]. Journal of Building Structures, 2002, 23(1):21-26.
[8] 潘文, 刘建, 杨晓东, 等. 8度区异形柱框架结构的振动台试验研究[J]. 建筑结构学报, 2007,28(增刊1):15-20.
PAN Wen, LIU Jian, YANG Xiao-dong, et al. Shaking table test of RC frame with special-shaped columns designed for seismic fortification intensity 8 zone[J]. Journal of Building Structures, 2007, 28(Suppl.1):15-20.
[9] 薛建阳, 胡宗波, 刘祖强. 型钢混凝土异形柱空间框架结构模型振动台试验研究[J]. 建筑结构学报, 2017, 38(2):74-82.
XUE Jian-yang, HU Zong-bo, LIU Zu-qiang. Shaking table test on steel reinforced concrete spatial frame structure model with special-shaped columns[J]. Journal of Building Struc-tures, 2017, 38(2):74-82.
[10] 高向宇, 周福霖, 俞公骅. 多层异型柱框架结构隔震性能的试验研究[J]. 世界地震工程, 1997, 13(4):21-27.
GAO Xiang-yu, ZHOU Fu-lin, YU Gong-hua. Experimental study on the seismic isolation effect of a RC frame model with special shaped columns[J]. World Earthquake Engineering, 1997, 13(4):21-27.
[11] 苏何先, 潘文, 白羽, 等. 隔震异形柱框架结构振动台试验研究[J]. 建筑结构学报, 2016, 37(12):65-73.
SU He-xian, Pan Wen, Bai Yu, et al. Shaking table test of seismic isolated RC frame structure with specially shaped columns[J]. Journal of Building Structures, 2016, 37(12):65-73.
[12] 苏经宇, 曾德民, 田杰. 隔震建筑概论[M]. 北京: 冶金工业出版社, 2012, 5-12.
[13] 潘毅, 韩徐扬, 刘宜丰, 等. 异形柱框架结构基础隔震设计与分析[J]. 土木工程学报, 2014, 47(增刊1):191-196.
PAN Yi, HAN Xu-yang, LIU Yi-feng, et al. Design and anal-ysis of seismic isolated frame structure with special-shaped columns[J]. China Civil Engineering Journal, 2014, 47(Suppl.1):191-196.
[114] 王依群, 赵盼. 异形柱框架结构的隔震设计[J]. 天津大学学报, 2010, 43(11):971-976.
WANG Yi-qun, ZHAO Pan. Design of seismic isolated frame structure with specially shaped column[J]. Journal of Tianjin University, 2010, 43 (11):971-976.
[15] 刘丽丽. 钢筋混凝土异形柱框架结构的基础隔震研究[D]. 河北: 河北工程大学, 2011.
LIU Li-li．Study of base isolation of R.C frame with special-shaped columns[D]. Hebei: Hebei University of Engineering, 2011.
[16] 冼巧玲, 周福霖, 王伟. 橡胶垫隔震框架结构试验研究[J]. 世界地震工程, 1996, 12(2):23-28.
XIAN Qiao-ling, ZHOU Fu-lin, WANG Wei. Testing inves-tigation for building frame with isolating rubber bearings[J]. World Earthquake Engineering, 1996, 12(2):23-28.
[17] ZHOU Fu-lin, S. F. Stieme, S. Cherry. Quantitative con-trolling of structural response for base isolation and energy dissipation system[J]. Earthquake Engineering and Engineer-ing Vibration, 1993, 13(1):30-39.
[18] 钱稼茹, 李耕勤. 异形柱用于8 度抗震设防建筑研究[J].工业建筑, 2004, 34(2):28-32.
QIAN Jia-ru, LI Geng-qin. Study on application of special-shaped columns to buildings with seismic fortification inten-sity 8[J]. Industrial Construction, 2004, 34(2):28-32.
[19] 高青松. 基础隔震异形柱框架结构振动台试验抗震性能研究[D]．昆明：昆明理工大学, 2015．
GAO Qing-song. Research on anti-seismic property of base isolation special-shaped column frame structure by shaking table test[D]. Kunming: Kunming University of Science & Technology, 2015.
[20] 张敏政. 地震模拟实验中相似律应用的若干问题[J]. 地震工程与工程振动, 1997, 17(2):52-58.
ZHANG Ming-zheng. Study on similitude laws for shaking table tests [J]. Earthquake Engineering and Engineering Vi-bration, 1997, 17(2):52-58.
[21] 何志坚, 王社良. 多层简单框架结构振动台模型设计[J]. 振动与冲击, 2013, 32(15):100-105.
HE Zhi-jian, WANG She-liang. Model design of multilayer simple frame structure in shaking table test[J]. Journal of Vi-bration and Shock, 2013, 32(15):100-105.
[22] 周颖, 吕西林, 卢文胜. 不同结构的振动台试验模型等效设计方法[J]. 结构工程师, 2006, 22 (4):37-40.
ZHOU Ying, LU Xi-lin, LU Wen-sheng. Shaking table test model design in different structures[J]. Structural Engineers, 2006, 22(4):37-40.
[23] 王经纬. 高层剪力墙基础隔震结构振动台试验抗震性能的分析与研究[D]. 昆明: 昆明理工大学, 2015.
WANG Jing-wei. Research on seismic performance of shak-ing table test of high-rise isolated shear wall structure[D]. Kunming: Kunming University of Science & Technology, 2015.
[24] 张龙飞. 山地掉层隔震结构倾覆失效机理及振动台试验研究[D]. 昆明: 昆明理工大学, 2018.
ZHANG Long-fei. Overturning failure mechanism and ex-perimental study of isolated step-terrance structure[D]. Kun-ming: Kunming University of Science & Technology, 2018.
