Abstract：In order to solve the problem of the change of milling force caused by tool wear in the milling process of splicing die, a modeling method of milling force considering the rear face wear of ball end cutter was put forward. According to the different hardness of the material, the cutting thickness of each cutting cycle was established as a function of the cutting angle, and the shear force model under different cutting angle was obtained. At the same time, the functional relationship between the friction effect stress of the rear face and the wear amount of the rear face was established, and the friction effect stress model under different cutting angles was obtained. Finally, the impact force model was obtained by introducing the single-degree-of-freedom italic collision model, using the equivalent spring damping method and Hopkinson experiment. Combined with the shear force model, friction stress model and impact force model, the milling force model at the splicing slit considering rear face wear was obtained. finally, the milling force experiment of multi-hardness hardened steel was carried out. It was shown by the experimental results that the predicted milling force amplitude and variation trend are in good agreement with the experimental values, which verifies the effectiveness of the milling force modeling method, and has a certain theoretical guiding significance for the optimization of milling process of splicing die.
岳彩旭,都建标，姜男,高海宁,朱磊,刘献礼. 考虑后刀面磨损及过缝冲击的拼接模具铣削力建模与实验研究[J]. 振动与冲击, 2019, 38(17): 284-291.
YUE Caixu DOU Jianbiao JIANG Nan GAO Haining ZHU Lei LIU Xianli . Modeling and experimental research on milling force of splicing die considering rear face wear and slit impact. JOURNAL OF VIBRATION AND SHOCK, 2019, 38(17): 284-291.
[1] Martellotti M E. An analysis of the milling process[J]. trans. ASME, 1941, 63(8): 677-700.
[2] Merchant M E. Basic mechanics of the metal cutting process[J]. Journal of Applied Mechanics, 1944, 11(A): 168-175.
[3] Nakayama K,ARAI M.On the storage of data on metal cutting forces[J]. Annals of the CIRP, 1976, 25(l): 13-18.
[4] 冯志勇, 张大卫, 黄田, 等. 一种新型的广义铣削力模型[J]. 中国机械工程, 1998, (02): 41-44.
Feng Zhiyong, Zhang David, Huang Tian, et al. A new generalized milling force model [J]. China Mechanical Engineering, 1998, (02): 41-44.
[5] Ko Jeong Hoon, Cho Dong-Woo, 3D Ball-End Milling Force Model Using Instantaneous Cutting Force Coefficients [J]. ASME J Manuf Sci Eng 2005.127(1):1-12.
[6] Tsai, Y. H, J.C.Chen, et al. An in-process surface recognition system based on neural networks in end milling cutting operations[J]. International Journal of Machine Tools and Manufacture, 1999, 39(4): 583-605.
[7] Ee Meng, et al. The prediction of dimensional error for sculptured surface productions using the ball-end milling process[J]. International Journal of Machine Tools and Manufacture, 1995, 35(8): 1149-1169.
[8] 吴俊谦. 拼接淬硬钢球头铣削力建模仿真及试验研究[D].浙江工业大学,2012.
Wu Junqian. Modeling, Simulation and Experimental study on Milling Force of spliced hardened Steel Ball head [D]. Zhejiang University of Technology,2012.
[9] 王扬渝. 多硬度拼接淬硬钢铣削动力学研究[D]. 浙江工业大学, 2013.
Wang Yangyu. Analysis of Milling Kinetics of hardened Steel with multiple hardness splicing [D]. Zhejiang University of Technology,2013.
[10] 岳彩旭, 张海涛, 马晶, 等. 基于铣削力突变的拼接模具硬态铣削工艺优化[J], 沈阳工业学报, 2016.
Yue Caixu, Zhang Haitao, Ma Jing, et al. Optimization of hard Milling process of splicing Mould based on sudden change of Milling Force [J], Shenyang Journal of Technology, 2016.
[11] 刘战强 ,艾兴.高速切削刀具磨损寿命的研究[J].工具技术,2001(12):3-7.
Liu Zhanqiang, Ai Xing. Study on wear life of high speed cutting tool [j]. Tools Engineering,2001(12):3-7.
[12] Li H Z, Zeng H, Chen X Q. An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts. J Mater Process Tech 180(1-3):296-304[J]. Journal of Materials Processing Tech, 2006, 180(1):296-304.
[13] Tansel I N, Arkan T T, Bao W Y, et al. Tool wear estimation in micro-machining: part II: neural-net-work-based periodic inspector for non-metals[J]. International Journal of Machine Tools and manufacture, 2000, 40(4): 609-620.
[14] 李锡文, 杜润生, 杨叔子. 基于后刀面磨损带面积的铣刀磨损模型的建立[J]. 华中科技大学学报, 2001, 29(4): 53-56．
Li Xiwen, du Runsheng, Yang Shuzi. The establishment of milling cutter wear model based on the area of the rear face wear belt [J]. Journal of Huazhong University of Science and Technology, 2001, 29(4): 53-56．
[15] S. K. Coundhury, S. Rath. In-process tool wear estimation in milling using cutting force model. Journal of Mater. Process. 2000, 99(1-3): 113-119.
[16] 刘才山,陈滨. 多柔体系统碰撞动力学研究综述[J].力学进展,2000,(01):7-14.
Liu Caishan, Chen Bin. A Review of collision Dynamics of flexible Multi-body Systems [J]. Progress in mechanics, 2000,(01):7-14.
[17] Lankarani H M, Nikravesh P E. Continuous contact force models for impact analysis in multibody systems[J]. Nonlinear Dynamics, 1994, 5(2): 193-207.
[18] T. M. Teitenberg, A. E. Bayoumi, and G. Yuscesan. Tool wear modeling though an analytic mechanistic model of milling processes[J]. Journal of Wear, 1992, 154(2): 287-304.
[19] E. Usui, T. Shirakashi, and T. Kitagawa. Analytical prediction of cutting tool wear. Wear.1984, 100(1-3): 129-151.
[20] Ahn K Y, Ryu B J. A modeling of impact dynamics and its application to impact force prediction[J]. Journal of Mechanical Science and Technology, 2005, 19: 422-428.
