裂纹止裂技术及裂纹动态扩展规律研究

摘要
图/表
参考文献(40)
相关文章 (1)

全文: PDF (899 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为了对动态荷载作用下水泥粉煤灰砂浆的裂缝动态扩展行为进行研究，提出了一种大尺寸带V型底边的半圆边裂纹(SECVB)试件,其V形底部具有止裂功能。SECVB试件的V形底部设计为180°，150°和120°三个角度。采用落锤冲击装置进行了冲击试验，并使用裂纹扩展计(CPG)用于测量裂纹扩展的相关参数。利用有限差分程序AUTODYN对裂纹扩展行为进行了数值模拟，并用有限元程序ABAQUS计算了裂纹的动态应力强度因子(DSIF)；根据CPG测量的裂纹萌生时间和扩展时间来确定临界应力强度因子。试验和数值模拟结果表明，SECVB试件适合于研究动态荷载作用下水泥粉煤灰砂浆的裂纹扩展行为和止裂行为。在裂纹扩展过程中，裂纹可能在一段时间内止裂，并且裂纹在起始时刻的断裂韧度高于裂纹扩展时的断裂韧度。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	郎林1
	2
	朱哲明1
	2
	万端莹1
	2
	邓帅1
	2
	王磊1
	2
	王兴渝1
	2

关键词 ：砂浆试件, 冲击加载, 裂缝止裂技术, V型底部

Abstract：In order to study the crack dynamic propagation behavior of cement fly ash mortar under dynamic loading, a large-scale semi-circular edge crack with V-shaped bottom (SECVB) specimen was proposed.The V-shaped bottom has crack arrest function and has three angles of 180, 150 and 120 degrees.Impact tests were carried out with a drop impact device, and crack propagation parameters were measured with Crack propagation gauges (CPGs).The finite difference code AUTODYN was used to simulate the crack propagation behavior, and the finite element program ABAQUS was used to calculate the dynamic stress intensity factor (DSIF).The critical stress intensity factor was determined according to the crack initiation time and propagation time measured by CPG.Experimental and numerical results show that SECVB specimens are suitable for studying crack propagation and crack arrest behavior of cement fly ash mortar under dynamic loading.In the process of crack propagation, the crack may stop for a period of time, and the fracture toughness of cement fly ash mortar crack at the beginning is higher than that of crack propagation.

Key words： mortar specimen impact loading crack arrest technique V-shaped bottom

收稿日期: 2018-09-28 出版日期: 2020-02-15

引用本文:

郎林1,2，朱哲明1,2，万端莹1,2，邓帅1,2，王磊1,2，王兴渝1,2. 裂纹止裂技术及裂纹动态扩展规律研究[J]. 振动与冲击, 2020, 39(4): 38-48.
LANG Lin1,2，ZHU Zheming1,2，WAN Duanying1,2，DENG Shuai1,2，WANG Lei1,2，WANG Xingyu1,2. A study on crack arrest technology and dynamic propagation law of crack. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(4): 38-48.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2020/V39/I4/38

[1] Kaplan M F. Crack propagation and the fracture of concrete[J]. ACI Structural Journal,1961,58(11):591-610.
[2] Kesler C E, Naus D J, Lott L L. Fracture mechanics-its applicability to concrete. In: Proceedings of the international conference on the mechanical behavior of materials[C], Kyoto, 1971, vol. 4. The Society of Material Science, 1972:113-124.
[3] Hillerborg A, Modeer M, Petersson P E. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements[J]. Cement and Concrete Research, 1976, 6: 773-782.
[4] Bazant Z P, Oh B H. Crack band theory for fracture concrete[J]. Materials and Structures (RILEM), 1983,16(93):155-167.
[5] Bazant Z P, Kazemi M T. Determination of fracture energy, process zone length, and brittleness number from size effect with application to rock and concrete[J]. International Journal of Fracture,1990,44(2):111-131.
[6] Nallathambi P, Karihaloo B L. Determination of the specimen size independent fracture toughness of plain concrete[J]. Magazine of Concrete Research,1986,38(135):67-76.
[7] Jenq Y S, Shah S P. Two-parameter fracture model for concrete[J]. Journal of Engineering Mechanics, 1985,111(10): 1227–1241.
[8]徐世烺. 混凝土双K断裂参数计算理论及规范化测试方法[J]. 三峡大学学报(自然科学版),2002,24(1):1-8.
XU Shi-lang. The Calculation Approaches of Double-K Fracture Parameters of Concrete and a Possible Coding Standard Test Method for Determining Them[J]. Journal of China Three Gorges University (Natural Science),2002,24(1):1-8.
[9] Morales-Alonsoa G, Rey-de-Pedrazab V, Gálvezb F, et al. Numerical simulation of fracture of concrete at different loading rates by using the cohesive crack model[J]. Theoretical and Applied Fracture Mechanics, 2018,96:308-325.
[10] 金浏，杜修力.加载速率及其突变对混凝土压缩破坏影响的数值研究[J]. 振动与冲击，2014, 33 (19): 187-193.
JIN Liu，DU Xiu-li. Effects of loading rate and its sudden change on concrete compressive failure[J]. Journal of vibration and shock, 2014, 33 (19): 187-193.
[11] 田威，韩女，张鹏坤. 混凝土冻融循环下动态破损机理的试验研究[J]. 振动与冲击，2017, 36 (8): 79-85.
TIAN Wei, HAN Nü, ZHANG Peng-kun. Experimental study on the dynamic damage mechanism of concrete under freeze-thaw cycles[J]. Journal of vibration and shock, 2014, 33 (19): 187-193.
[12]范向前，胡少伟，陆俊，等.不同初始损伤混凝土动态轴向拉伸试验研究[J]. 振动与冲击，2016, 35 (17): 117-133.
FAN Xiang-qian, HU Sao-wei, LU Jun, et al. Dynamic axial tensile tests of concrete with different initial damages[J]. Journal of vibration and shock, 2016, 35 (17): 117-133.
[13]聂良学,许金余,任韦波,等.不同温度及加载速率对混凝土冲击变形韧性影响［J］.振动与冲击,2015,34( 6) :67-71,
NIE Liang-xue, XU Jin-yu, REN Wei-bo, et al. Effects of temperature and impact velocity on impact deformation and toughness of concrete［J］. Journal of Vibration and Shock,2015, 34(6): 67-71.
[14］李杰, 晏小欢,任晓丹.不同加载速率下混凝土单轴受压性能大样本试验研究［J］.建筑结构学报, 2016,37( 8) : 66-75.
LI Jie,YAN Xiao-huan,ＲEN Xiao-dan. Large-sample experimental study on uniaxial compressive behavior of concrete under different loading rates[J].Journal of Building Structures,2016,37( 8) :66－75.
[15] Zhu ZM, Mohanty B, Xie HP. Numerical investigation of blasting-induced crack initiation and propagation in rocks[J]. International Journal of Rock Mechanics and Mining Sciences,2007,44(3):412-424.
[16] Zhu Z, Xie H. and Mohanty B. Numerical Investigation of Blasting-induced damage in Cylindrical Rocks[J]. International Journal of Rock Mechanics and Mining Sciences, 2008,45(2):111-121.

[17] Zhu Z, Wang C, Kang JM, et al. Study on the mechanism of zonal disintegration around an excavation[J]. International Journal of Rock Mechanics and Mining Sciences,2014,67(4):88- 95.
[18] Zhang QB, Zhao J. Determination of mechanical properties and full-field strain measurements of rock material under dynamic loads[J]. International Journal of Rock Mechanics and Mining Sciences,2013,60(8):423-439.
[19] Lee D, Tippur H, Bogert P. Dynamic fracture of graphite/epoxy composites stiffened by buffer strips: An experimental study[J]. Composite Structures, 2012, 94(12): 38-45.
[20] Avachat S, Zhou M. High-speed digital imaging and computational modeling of dynamic failure in composite structures subjected to underwater impulsive loads[J]. International Journal of Impact Engineering, 2015, 77:147-165.
[21] Jiang FC, Vecchio KS. Hopkinson bar loaded fracture experimental technique: a critical review of dynamic fracture toughness tests[J]. Applied Mechanics Reviews, 2009,62(6): 1469-1474.
[22] Wang QZ, Feng F, Ni M, et al. Measurement of mode I and mode II rock dynamic fracture toughness with cracked straight through flattened Brazilian disc impacted by split Hopkinson pressure bar[J]. Engineering Fracture
Mechanics, 2011,78(12):2455-2469.
[23] 王蒙，朱哲明，谢军. 岩石I-II 复合型裂纹动态扩展SHPB 实验及数值模拟研究[J]. 岩石力学与工程学报，2015，34(12)：2474-2485.
WANG M, ZHU Zhe-ming, XIE Jun. Experimental and numerical studies of the mixed-mode I and II crack propagation under dynamic loading using SPHB[J]. Chinese Journal of Rock Mechanics and Engineering,2015, 34(12):2 474–2 485.
[24] Yang S, Tang TX, Zollinger D, et al. Splitting tension tests to determine concrete fracture parameters by peak-load method[J]. Advanced Cement Based Materials,1997,5(1):18-28.
[25]冯峰,韦重耕,王启智, 用中心直裂纹平台巴西圆盘测试岩石动态断裂韧度的尺寸效应[J].工程力学,2009,26(4):167-173.
FENG Feng,WEI Chong-geng,WANG Qi-zhi, Size effect for rock dynamic fracture toughness tested with cracked straight through flattened Brazilian disc[J]. Engineering Mechanics , 2009, 26 (4):
167-173.
[26] Aliha MRM, Ayatollahi MR. Rock fracture toughness study using cracked chevron notched Brazilian disc specimen under pure modes I and II loading - A statistical approach[J]. Theoretical and Applied Fracture Mechanics, 2014,69(2):17-25.
[27] Surendra KVN, Simha KRY. Analysis of cracked and un-cracked semicircular rings under symmetric loading[J]. Engineering Fracture Mechanics, 2014, 128: 69-90.
[28] Ouchterlony F. suggested methods for determining the fracture toughness of rock[J]. International Journal of Rock Mechanics and Mining Sciences, 1988,25(2):71-96.
[29] Chong KP, Kuruppu MD. New specimen for fracture toughness determination of rock and other materials[J]. International Journal of Fracture, 1984, 26(2):59-62.
[30] Ravi-Chandar K, Knauss W.G. An experimental investigation into dynamic fracture: I. Crack initiation and arrest[J]. International Journal of Fracture,1984, 25:247-262.
[31] Grégoire D, Maigre H, Combescure A. New experimental and numerical techniques to study the arrest and the restart of a crack under impact in transparent materials[J]. International Journal of Solids and Structures, 2009, 46(18/19): 3480-3491.
[32]杨井瑞，张财贵，周妍，等. 用SCDC试样测试岩石动态断裂韧度的新方法[J]. 岩石力学与工程学报，2015，34(2) ： 279 -292.
Yang JR, Zhang CG, Zhou Y, et al. A new method for determing dynamic fracture toughness of rock using SCDC specimens[J]. Chinese Journal of Rock Mechanics and Engineering, 2015, 34 (2): 279-292.
[33] Wang XM, Zhu ZM, Wang M, et al. Study of rock dynamic fracture toughness by using VB-SCSC specimens under medium-low speed impacts[J]. Engineering Fracture Mechanics, 2017,181: 52-64.
[34] Freund LB. Dynamic fracture mechanics[M], Cambridge: Cambridge University Press,1990.
[35] Ravi Chandar K. Dynamic fracture[M]. Elsevier, 2004.
[36] Bhat HS, Rosakis AJ, Sammis CG. A Micromechanics Based Constitutive Model for Brittle Failure at High Strain Rates[J]. Journal of Applied Mechanics, 2012,79(3): 39-37.
[37] Dong YQ, Zhu ZM, Zhou L, et al. Wang. Study of mode I crack dynamic propagation behaviour and rock dynamic fracture toughness by using SCT specimens[J], Fatigue & Fracture of Engineering Materials and Structures, 2018,41:1810–1822.
[38] Zhang QB, Zhao J. Effect of loading rate on fracture toughness and failure micro mechanisms in marble[J]. Engineering Fracture Mechanics, 2013,102(2):288-309.
[39] Chen R, Xia K, Dai F, et al. Determination of dynamic fracture parameters using a semi-circular bend technique in split Hopkinson pressure bar testing[J]. Engineering Fracture Mechanics, 2009,76(9):1268-1276.
[40] Zhou Z, Li X, Liu A, et al. Stress uniformity of split Hopkinson pressure bar under half-sine wave loads[J]. International Journal of Rock Mechanics and Mining Sciences, 2011,48(4):697-701.