[1] 顾家柳,丁奎元,刘启洲等.转子动力学[M].北京:国防工业出版社,1985.
GUJia-liu, Ding Kui-yuan, Liu Qi-zhou, etal.Rotor dynamics[M].Beijing: National Defense Industry Press.1985.
[2] 孟光.转子动力学研究的回顾与展望[J].振动工程学报, 2002,15(1):1-9.
MENG Guang. Retrospect and prospect to the research on rotordynamics[J]. Journal of Vibration Engineering, 2002, 15(1): 1-9.
[3] 邓旺群,任兴民.高速转子动平衡技术[M].北京:科学出版社,2017.
DENG Wang-qun, REN Xing-min. High speed rotor dynamic balance technique[M]. Beijing: Science Press, 2017.
[4] 邓旺群,高德平.涡轴发动机动力涡轮转子高速动平衡技术研究.航空动力学报,2003,18(5):667-675.
DENG Wang-qun, GAO De-Ping. High speed dynamic balance technique of a power turbine rotor of a turbine shaft engine.Journal of Aerospace Power,2003,18(5):667-675.
[5]邓旺群,高德平.涡轴发动机动力涡轮转子动力特性研究[J].航空动力学报,2003,18(6):717-722.
DENG Wang-qun, GAO De-ping. Dynamics characteristics study of apower turbine rotor of a turbine shaft engine[J]. Journal of Aerospace Power,2003,18(6):717-722.
[6]邓旺群,郭飞跃,高德平.航空发动机高速柔性转子动力特性计算[J].振动与冲击,2006,25(5):130-133.
DENG Wang-qun, GUO Fei-yue, GAO De-ping. Dynamic characteristic calculation for a high speed flexible rotors of an aero-engine[J]. Journal of Vibration and Shock, 2006, 25(5):130-133.
[7] 邓旺群,王桢,舒斯荣,等.涡轴发动机细长柔性转子动力特性及高速动平衡技术研究[J].振动与冲击,2012,31(7): 162-165,170.
DENG Wang-qun, WANG Zhen, SHU Si-rong, et al. Dynamic characteristics and high speed dynamic balance technique for a power turbine rotor of a turbo-shaft engine[J].Journal of Vibration and Shock, 2012,31(7):162-165,170.
[8] 邓旺群,郭飞跃,高德平.高速柔性转子的主要零部件对其动力特性的影响分析[J].机械强度, 2006,28(6):813-819.
DENG Wang-qun, GUO Fei-yue, GAO De-ping. Analysis of influence of its main parts or components on dynamic characteristics of high speed flexible rotors[J].Journal of Mechanical Strength, 2006,28(6):813-819.
[9] 邓旺群,高德平,郭飞跃. 航空发动机动力涡轮单元体高速动平衡试验研究[J]. 机械强度, 2007,29(3):380-386.
DENG Wangqun, GAO Deping, GU0 Feiyue. Experimentresearchofhighspeeddynamicbalance ofapowerturbinemoduleofaeroengine[J].Journal of Mechanical Strength, 2007,29(3):380-386.
[10] Yi DING. Dynamic Characteristic Analysis of a Power Turbine Rotor System Based on Finite Element Method[A]. Science and Engineering of Research Center. Proceeding of 2017 2nd international Conference on Applied Mechanics and Mechatronics Engineering[C].Science and Engineeering Research Center, 2017, 6. |