Technology for detecting bolted joints based on nonlinear damping identification
AI Yanting, LIU Chengming, WANG Zhi, TIAN Jing
1.Liaoning Provincial Key Lab of Advanced Measurement and Test Technology of Aviation Propulsion Systems, Shenyang Aerospace University, Shenyang 110136, China
Abstract:Bolt connection quality is the key factor to affect the mechanical structure assembly quality, so it’s important to explore a fast and effective technique for its detection.The definition of high order nonlinear damping ratio was proposed, and a formula for the identification of nonlinear damping on the bolted joints contact surfaces was provided according to the energy conservation law.The dynamic characteristics of the system were obtained through modal experiments, combined with which the empirical mode decomposition (EMD) was used to determine the frequency sensitive to the torsional vibration of the system.Impact response experiments of L-beams under different torques were carried out.The viscous damping ratio and nonlinear damping ratio of the system were identified by using the Hilbert transform and the established nonlinear damping identification formula.The results show that the change of bolt torque has a little effect on the natural frequencies of the system, but has obvious influence on the damping of the system, especially the viscous damping ratio.When the bolt is loose, the viscous damping ratio of the system will change significantly, that is, from 0.122 5 to 0.258 7, a relative increase of 111.18%, which verifies the effectiveness of the method proposed.
艾延廷,刘成明,王志,田晶. 基于非线性阻尼识别的螺栓连接检测技术[J]. 振动与冲击, 2020, 39(9): 138-143.
AI Yanting, LIU Chengming, WANG Zhi, TIAN Jing. Technology for detecting bolted joints based on nonlinear damping identification. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(9): 138-143.
[1] 李静, 赵春蕾, 白姗姗, 等. 基于结合面密封性的螺栓组连接工艺研究[J]. 机械设计与制造, 2015, (6):154-157.
LI, Jing, ZHAO, Chun-lei, BAI, Shan-shan, et al. The Research of Bolt-Joint Process about Sealing Performance of Joint Surface[J]. 机械设计与制造, 2015, (6):154-157.
[2] 张学良. 机械结合面动态特性及应用[M]. 北京: 中国科学技术出版社, 2002.
[3] Beards C F. The Damping of Structural Vibration by Controlled Interfacial Slip in Joints [J]. Journal of Vibration and Acoustics, 1983,Vol.105(No.3):369-373.
[4] Bovsunovsky A P, Surace C. Considerations regarding superharmonic vibrations of a cracked beam and the variation in damping caused by the presence of the crack[J]. Journal of Sound & Vibration, 2005,288(4/5):865-886.
[5] 张学良, 王南山, 温淑花, 等. 机械结合面切向接触阻尼能量耗散弹塑性分形模型[J]. 机械工程学报, 2013,49(12):43-49.
ZHANG, Xue-liang, WANG, Nan-shan, WEN, Shu-hua, et al. Elastoplastic Fractal Model for Tangential Contact Damping Energy Dissipation of Machine Joint Interfaces[J]. Journal of Mechanical Engineering, 2013,49(12):43-49.
[6] 傅俊庆, 荣见华, 张玉萍. 螺栓连接接口轴向振动能量耗散特性研究[J]. 振动、测试与诊断, 2005,25(3):205-209.
Fu, Jun-qing, Rong, Jian-hua, Zhang, Yu-ping. Study on Energy Dissipation of Axial Vibration in Bolted Joint[J]. Journal of Vibration,Measurement & Diagnosis, 2005,25(3):205-209.
[7] Franchetti P, Modena C, Feng M Q. Nonlinear Damping Identification in Precast Prestressed Reinforced Concrete Beams[J]. Computer-Aided Civil & Infrastructure Engineering, 2009,24(8):577-592.
[8] 李玲, 蔡力钢, 郭铁能, 等. 不同预紧力下栓接结合部法向等效特性[J]. 北京工业大学学报, 2013,39(5):660-665.
LI, Ling, CAI, Li-gang, GUO, Tie-neng, et al. Normal Equivalent Properties of the Bolted Joints in Different Preload[J]. Journal of Beijing University of Technology, 2013,39(5):660-665.
[9] Smith C B, Wereley N W. Nonlinear Damping Identification from Transient Data.[J]. AIAA Journal, 1999,37(12):1625-1632.
[10] 张子阳, 谢寿生, 彭靖波, 等. 基于非线性阻尼的航空发动机高压转子拉杆结构装配检测方法[J]. 航空学报, 2012,33(3):470-478.
ZHANG, Zi-yang, XIE, Shou-sheng, PENG, Jing-bo, et al. Assembly Variation Detection for Rod Fastening Rotor of High Pressure Spool in Aero-engine Based on Nonlinear Damping Identification[J]. Acta Aeronautica ET Astronautica Sinica, 2012,33(3):470-478.
[11] Curadelli R O, Riera J D, Ambrosini D, et al. Damage detection by means of structural damping identification[J]. Engineering Structures, 2008,30(12):3497-3504.
[12] Yang K, Yu K, Li Q. Modal parameter extraction based on Hilbert transform and complex independent component analysis with reference.[J]. Mechanical Systems & Signal Processing, 2013,40(1):257-268.
[13] Feldman M. Non-Linear Free Vibration Identification Via The Hilbert Transform[J]. Journal of Sound and Vibration, 1997,Vol.208(NO.3):475-489.
[14] 艾延廷, 杨策, 田晶, 等. 结合面非线性特性对法兰螺栓连接动态性能的影响[J]. 推进技术, 2018,39(09):2068-2074.
AI, Yan-ting, YANG, Ce, TIAN, Jing, et al. Effects of Non-Linear Characteristics of Joint Surface on Dynamic Performance of Flange Bolt Connection[J]. Journal of Propulsion Technology, 2018,39(09):2068-2074.
[15] Feldman M. Non-linear system vibration analysis using Hilberttransform--II. Forced vibration analysis method Forcevib [J]. Mechanical Systems and Signal Processing, 1994,Vol.8(NO.3):309-318.
[16] Feldman M. Non-linear system vibration analysis using Hilberttransform--I. Free vibration analysis method Freevib [J]. Mechanical Systems and Signal Processing, 1994,Vol.8(NO.2):119-127.