Application of cage guided by combined action of outer race and balls in bearing vibration reduction
LIU Wentao1, ZHANG Xu1, WANG Shouren1, ZHANG Yun2, WANG Gaoqi1
1.College of Mechanical Engineering, University of Jinan, Jinan 250022, China;
2.School of Mechanical Engineering, Tsinghua University, Beijing 100084, China
Abstract：Cage is a key component of a rolling bearing, and when a high-speed rolling bearing’s cage motion is guided by its outer race, contact and collision between cage and outer race can cause bearing’s larger vibration.Here, to reduce bearing vibration, a new cage guide mode was proposed, the cage motion was guided by the combination of outer race and balls.A cage with outer lock mouth pocket hole structure was designed to realize this guide mode.The cage’s pocket hole structure was composed of two parts, the part near the outside of the pocket hole was spherical, and the diameter of the outer port of the pocket hole was smaller than that of balls; the part near the inside of the pocket hole was cylindrical, and the diameter of the inner port of the pocket hole was larger than that of balls.Then, the mechanical model for motion of a cage with outer lock mouth pocket hole structure guided by combination of outer race and balls was established.Under conditions of different rotating speeds, offsets and contact states, magnitude and variation law of forces acting on a cage with outer lock mouth pocket hole structure and one with straight pocket hole structure, respectively in the opposite direction of their offsets were analyzed contrastively.The cage with outer lock mouth pocket hole structure was machined with the lathe cutting method, and its reducing bearing vibration effect was verified with tests.
刘文涛1，张旭1，王守仁1，张云2，王高琦1. 保持架组合引导对滚动轴承减振作用研究[J]. 振动与冲击, 2020, 39(21): 24-33.
LIU Wentao1, ZHANG Xu1, WANG Shouren1, ZHANG Yun2, WANG Gaoqi1. Application of cage guided by combined action of outer race and balls in bearing vibration reduction. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(21): 24-33.
[1] WALTERS C T. The dynamics of ball bearings [J]. Journal of Tribology, 1970, 93(1):1-10.
[2] GUPTA P K. Dynamics of rolling-element bearings—Part Ⅲ: Ball bearing analysis [J]. Journal of Tribology, 1979, 101(3): 312-318.
[3] GUPTA P K. Dynamics of rolling-element bearings—Part Ⅳ: Ball bearing analysis [J]. Journal of Tribology, 1979, 101(3): 319-326.
[4] GUPTA P K. Advanced Dynamics of Rolling Elements [M]. Springer-verlag, 1984.
[5] GUPTA P K. Modeling of Instabilities Induced by Cage Clearances in Ball Bearings [J]. ASLE Transactions, 1991, 34(1): 93-99.
[6] GUPTA, P K. Modeling of Instabilities Induced by Cage Clearances in Cylindrical Roller Bearings [J]. ASLE Transactions, 1991, 34(1): 1-8.
[7] LIU Xiuhai, DENG Sier, TENG Hongfei. Dynamic stability analysis of cages in high-speed oil-lubricated angular contact ball bearings. Transactions of Tianjin University, 2011, 17(01): 20-27.
[8] 刘秀海.高速滚动轴承动力学分析模型与保持架动态性能研究[D].大连理工大学,2011.
LIU Xiuhai. Dynamic analysis model of high-speed rolling bearings and dynamics performance of cages [D]. Dalian; Dalian University of Technology, 2011.
[9] 王自彬,邓四二,张文虎,等.高速圆柱滚子轴承保持架运行稳定性分析[J].振动与冲击,2019,38(09): 100-108.
WANG Zibin, DENG Sier, ZHANG Wenhu, et al. Operational stability analysis for cage of high-speed cylindrical roller bearings [J]. Journal of Vibration and Shock, 2019, 38(9): 100-108.
[10] 温保岗,韩清凯,乔留春,等.保持架间隙对角接触球轴承保持架磨损的影响研究[J].振动与冲击,2018,37(23):9-14.
WEN Baogang, HAN Qingkai, QIAO Liuchun, et al. Effects of cage clearance on its wear in an angular contact ball bearing [J]. Journal of Vibration and Shock, 2018, 37(23): 9-14.
[11] 张涛,陈晓阳,顾家铭,等.高速角接触球轴承保持架不稳定运动机理分析[J].振动与冲击,2019,38(10): 233-241.
ZHANG Tao, CHEN Xiaoyang, GU Jiaming, et al. Analysis on the unstable movement mechanism of high-speed angular contact ball bearing cages [J]. Journal of Vibration and Shock, 2019, 38(10): 233-241.
[12] 吴正海,徐颖强,邓四二,等.高速脂润滑圆锥滚子轴承保持架动态稳定性分析[J].振动与冲击,2019,38(10): 49-57.
WU Zhenghai, XU Yingqiang, DENG Sier, et al. Dynamic stability of cages in high-speed tapered roller bearings with grease lubrication [J]. Journal of Vibration and Shock, 2019, 38(10): 49-57.
[13] LIU Xiuhai, DENG Sier, TENG Hongfei. Dynamic Analysis of Flexible Cage of High-speed Angular Contact Ball Bearing [J]. Journal of China Ordnance, 2012, 8(2): 98-103.
[14] 马旭睿,王学辉,魏敏.双列角接触球轴承保持架的改进[J].通用机械,2007(03): 62-63.
MA Xurui, WANG Xuehui, WEI Min. Improvement of double row angular contact ball bearing cage [J]. General Machinery,2007(03): 62-63.
[15] 汪凯,张迅雷,李兴林.高速精密角接触球轴承保持架优化设计[J].轴承,2015(10): 6-7.
WANG Kai, ZHANG Xunlei, LI Xinglin. Optimization design of high speed precision angular contact ball bearing cage [J]. Bearing, 2015(10): 6-7.
[16] 姚颖才,曲琼,郭帅.三、四点接触球轴承实体保持架结构改进[J].轴承,2016(11): 16-17.
YAO Yingcai, QU Qiong, GUO Shuai. Three and four point contact ball bearing solid cage structure improvement [J]. 2016(11):16-17.
[17] 冈本纯三. 球轴承的设计计算[M].北京:机械工业出版社, 2003.
GANGben Chunsan. Ball bearing design calculation [M]. Beijing: Mechanical Industry Press, 2003.
[18] 邓四二,贾群义,薛进学.滚动轴承设计原理[M].中国标准出版社, 2014.
DENG Sier, JIA Qunyi, XUE Jinxue. Rolling bearing design principle [M]. China Standard Press, 2014.
[19] GUPTA P K. Advanced dynamics of rolling elements [M]. Springer-verlag, 1984.
[20] 刘亚盈,蔡根喜,丁琦,等.轴承工程塑料保持架的制造与应用, 工程塑料应用, 1994, 22(1): 4-58.
LIU Yaying, CAI Genxi, DING Qi, et al. Engineering plastic cage bearing manufacturing and application [J]. Engineering Plastics Application, 1994, 22(1): 4-58.
[21] 中华人民共和国国籍经济贸易委员会. JB/T5314-2002, 中华人民共和国机械行业标准—滚动轴承振动（加速度）测量方法.
People's Republic of China Nationality Economic and Trade Commission. JB/T5314-2002, Machinery Industry Standard of the People's Republic of China-Rolling Bearing Vibration (Acceleration) Measurement Method.
[22] BRANDT A. Noise and vibration analysis: signal analysis and experimental procedures [M]. Wiley, 2011.
