振动与接触冲击耦合作用下的齿轮弹流润滑研究

摘要
图/表
参考文献(18)
相关文章 (15)

全文: PDF (863 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为探究振动与冲击耦合作用下齿轮的弹流润滑特性，考虑时变啮合刚度对齿轮动力学行为的影响，基于动力学理论建立了六自由度渐开线直齿轮摩擦动力学模型，并在此基础上研究齿轮啮合点处速度差异导致的接触冲击现象，对比分析动载荷与平稳载荷以及接触冲击位置、冲击转速对渐开线直齿轮时变弹流润滑结果的影响。研究表明：与平稳载荷相比，基于动载荷的齿轮弹流润滑研究更能准确反映齿轮的瞬态润滑特性；啮合点处速度差异会导致两轮齿的接触冲击现象，冲击转速和冲击位置对冲击合力有较大影响，并进一步影响齿轮的润滑状况。冲击位置越靠近啮出点，冲击转速越高，齿轮润滑时的“喘振”效果越明显。冲击转速过高或齿轮当量质量过小时会造成齿轮传动过程中“脱啮”。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	菅光霄
	王优强
	于晓
	罗恒
	李云凯

关键词 ：渐开线直齿轮, 时变啮合刚度, 摩擦动力学模型, 接触冲击, 润滑特性

Abstract：In order to explore elasto-hydrodynamic (EHL) characteristics of gears under coupling of vibration and contact impact, considering effects of time-varying meshing stiffness on gear dynamic behavior, a 6-DOF friction dynamic model of involute spur gears was established based on the theory of dynamics.Then, the contact impact phenomenon caused by velocity difference at meshing point of gears was studied.Effects of dynamic load and steady load, impact position and impact rotating speed on gears’ time-varying EHL were analyzed contrastively.Results showed that compared with steady load, the EHL study based on dynamic load can more accurately reflect gears’ transient lubrication characteristics; the velocity difference at meshing point can cause contact impact phenomenon of two gears’ teeth; the impact rotating speed and position have larger influence on impact resultant force and further affect gears’ lubrication; the closer to meshing point the impact position, the higher the impact rotating speed, the more obvious the "surge" effect of gear lubrication; too high impact rotating speed or too small gear equivalent mass can cause "de-meshing" in gear transmission process.

Key words： involute spur gear time-varying meshing stiffness friction dynamic model contact impact lubrication characteristics

收稿日期: 2019-03-11 出版日期: 2020-10-28

引用本文:

菅光霄,王优强,于晓,罗恒,李云凯. 振动与接触冲击耦合作用下的齿轮弹流润滑研究[J]. 振动与冲击, 2020, 39(21): 226-232.
JIAN Guangxiao, WANG Youqiang, YU Xiao, LUO Heng, LI Yunkai. Elasto-hydrodynamic lubrication of gears under coupling of vibration and contact impact. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(21): 226-232.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2020/V39/I21/226

[1] 张笑,卢剑伟,吴祚云,等.计入齿面摩擦和热变形的齿轮传动系统动力学建模分析[J].振动与冲击,2017,36(10):207-211.
    ZHANG Xiao, LU Jianwei, WU Zuoyun, et al. Dynamic modeling and analysis on gear transmission system with consideration the tooth surface friction and thermal deformation[J].Journal of vibration and shock, 2017,36(10):207-211.
[2] 刘辉,张晨,王成.两级渐开线齿轮传动系统横-摆-扭耦合非线性动力学建模与试验验证[J].振动与冲击,2017,36(15):124-132.
    LIU Hui, ZHANG Chen, WANG Cheng. Nonlinear dynamic modeling and test validation for a two-stage involute gear system[J].Journal of vibration and shock, 2017,36(15):124-132.
[3] 刘延伟,赵克刚.接合间隙对齿轮系统非线性特性的影响分析[J].振动与冲击,2016,35(14):215-221.
    LIU Yanwei, ZHAO Ke-gang. Influence of engaging clearance on gear system dynamic characteristics[J].Journal of vibration and shock,2016,35(14):215-221.
[4] 王优强，畅通. 啮入冲击对直齿轮弹流润滑的影响 [J].计算力学学报,2010,27(03):527-532.
WANG Youqiang, CHANG Tong. The influence of approach impact load on elasto-hydrodynamic lubrication of involute spur geras [J]. Chinese Journal of Computational Mechanics, 2010,27(03):527-532.
[5] WANG Youqiang, HE Zhicheng. Effect of Impact Load on Transient Elastohydrodynamic Lubrication of Involute Spur Gears[J].Tribology Transactions, 2012,55(2):155-162.
[6] 时高伟，王优强. 变卷吸速度过程对直齿圆柱齿轮热混合润滑的影响[J].润滑与密封, 2011,36(01):43-48.
SHI Gaowei, WANG Youqiang. The Effects of Variable Entrainment Velocity on Thermal Mixed Lubrication of spur gear[J].Lubrication Engineering, 2011,36(01):43-48.
[7] 王文中,操鸿. 渐开线斜齿轮非稳态弹流润滑数值模拟研究[J].摩擦学学报,2011,31(06):604-609.
WANG Wenzhong, CAO Hong. Numerical Simulation of Transient Elastohydrodynamic Lubrication of Helical gears [J].Tribology, 2011,31 (06): 604-609.
[8] 邹玉静,常德功. 渐开线直齿轮的动力学与弹流润滑分析耦合[J].航空动力学学报,2016,31(08):2010-2020.
ZOU YU-jing, CHANG Degong. Coupling of dynamics and elastohydrodynamic lubrication for spur gear[J]. Journal of Aerospace Power,2016,31(08):2010-2020.
[9] 薛建华，李威，李启超.基于时变刚度的齿轮系统动载荷及热弹流润滑分析[J].中南大学学报,2014,08(45):2603-2609.
   XUE Jian-hua, LI Wei, LI Qi-chao. Dynamic load and thermoelastohydrodynamic lubrication analysis of gear system based on time-varying stiffness [J]. Journal of Central South university,2014,08(45):2603-2609.
[10] 王旭,伍星,肖正明,等.含裂纹故障的齿轮系统动力学特性研究及其故障特征分析[J].振动与冲击,2017,36(09):74-79.
   WANG Xu, WU Xing, XIAO Zhengming, et al. Dynamic characteristics of a gear system with crack fault and its fault feature analysis[J].Journal of vibration and shock, 2017,36(09):74-79.
[11] 向玲,高楠,唐亮,等.支承刚度变化下风电齿轮传动系统的非线性动力学特性[J].振动与冲击,2019,38(01):103-109.
   XIANG Ling, GAO Nan, TANG Liang, et al. Nonlinear dynamic characteristics of wind turbine gear transmission system with varying support stiffness[J].Journal of vibration and shock, 019,38(01):103-109.
[12] 李润芳,王建军.齿轮系统动力学[M].北京:科学出版社,1997.
LI Runfang, WANG Jianjun. Gear system dynamics [M]. Beijing: Science Press,1997.
[13] 唐进元,周炜,陈思雨.齿轮传动啮合接触冲击分析[J].机械工程学报,2011,47(4):21-29.
TANG Jinyuan, ZHOU Wei, CHEN Siyu. Meshing contact impact analysis of gear transmission [J]. Journal of Mechanical Engineering,2011,47(4):21-29.
[14] 黄兴保，王优强.摆动工况下直齿轮瞬态        弹流润滑分析[J].润滑与密封，2015,40(11):65-70.
Huang Xingbao, Wang Youqiang. Transient Elastohydrodynamic Lubrication Analysis of Spur Gears Under Oscillation Conditions[J].Lubrication Engineering, 2015,40(11):65-70.
[15] 菅光霄,王优强,罗恒,等.基于时变啮合刚度的变位齿轮系统热弹流润滑研究[J].摩擦学学报,2020,40(01):21-29.
    JIAN Guang-xiao, WANG You-qiang, LUO Heng, et al. Thermal Elastohydrodynamic Lubrication of X-Gears System Based on Time-Varying Meshing Stiffness[J].Tribology, 2020,40(01):21-29.
[16] 王优强,卞荣.连续波状粗糙度对直齿轮热弹流润滑的影响[J].机械工程学报,2009,45(8):112-118.
WANG Youqiang, BIAN Rong. Effect of continuous wave roughness on thermo-hydro-lubrication of spur gear [J].Journal of Mechanical Engineering, 2009,45(8):112-118.
[17] 菅光霄,王优强,罗恒,等.齿轮动力学与弹性流体动力润滑耦合研究[J].机械传动,2020,44(02):22-27.
   JIAN Guang-xiao, WANG You-qiang, LUO Heng, et al. Study on the Coupling of Gear Dynamics and Elastohydrodynamic Lubrication[J]. Journal of Mechanical Transmission, 2020,44(02):22-27.
[18] 杨沛然.流体润滑数值分析[M].北京:国防工业出版社,1998.
YANG Peiran. Numerical analysis of fluid lubrication [M]. Beijing: National Defense Industry Press, 1998.