|
|
|
| Experimental modeling and parameter identification of non-forming damping characteristics of metal rubber |
| ZHANG Bin1, REN Zhiying1, BAI Hongbai1, CHEN Qisheng1, LU Chunhong2 |
1.Engineering Research Center for Metal Rubber, School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108,China;
2.Department of Automotive Engineering, Hebei College of Industry and Technology,Shijiazhuang 050001,China |
|
|
|
|
Abstract Metal rubber is widely used to solve vibration problems.However, the research on the non-forming direction of metal rubber is few.Metal rubber with densities of 2.5 g /cm3, 3.0 g/cm3, 3.5 g/cm3 and 4.0 g/cm3 were prepared.Sinusoidal loading tests of 1-4 Hz were carried out, and the force-displacement curves were obtained.The dynamic compression mechanism of the two directions was analyzed.The effect of loading frequency and density on damping characteristics was analyzed using equivalent loss factor.The damping model of non-forming direction was established by a parameter separation method and the parameters were identified.The results show that metal rubber has anisotropy, with the increase of the density of metal rubber, the loss factor decreases.Compared with the forming direction, the non-forming direction has greater dynamic stiffness.Its damping performance is less affected by the change of frequency and more affected by the density in the low frequency band.
|
|
Received: 11 July 2019
Published: 28 February 2021
|
|
|
|
[1] 白鸿柏， 路纯红， 曹凤利，等. 金属橡胶材料及工程应用[M]. 科学出版社, 2014.
Bai Hongbai, Lu Chunhong, Cao Fengli, et.al. Metal rubber materials and engineering applications[M]. Science Press, 2014.
[2] 切戈达耶夫.金属橡胶试件的设计[M].北京:国防工业出版社,2000.
Chegordaev. Design of metal rubber specimen [M]. Beijing: national defense industry press,2000
[3] 卢成壮，李静媛，周邦阳，等.金属橡胶的刚度特性和阻尼试验研究[J].振动与冲击,2017,36(08):203-208.
Lu Chengzhuang, Li Jingyuan, Zhou Bangyang, et.al. An experimental study on stiffness characteristics and damping of metal rubber [J]. Vibration and impact,2017,36(08):203-208.
[4] 周艳国，屈文忠.金属橡胶非线性动力学特性建模方法研究[J].噪声与振动控制,2013,33(01):31-36.
Zhou Yanguo, Qu Wenzhong. Several Practical Approaches for Nonlinear Dynamic Modeling of Metal Rubber [J]. Noise and vibration control,2013,33(01):31-36.
[5] 杨坤鹏，樊文欣，朱家萱.金属橡胶隔振器的非线性响应特性[J].科学技术与工程,2017,17(28):176-180.
Yang Kunpeng, Fan Wenxin, zhu jiaxuan. Nonlinear response characteristics of metal rubber isolator [J]. Science, technology and engineering,2017,17(28):176-180.
[6] 王光远，郑钢铁，韩潮. 金属橡胶动力学建模的频域方法[J].宇航学报,2008(02):499-504.
Wang Guangyuan, Zheng Gangtie, Han Chao. Dynamic Modeling Method of Metallic Rubbers in Frequency Domain[J]. Acta astronautica sinica,2008(02):499-504.
[7] 余慧杰，许亚辉，刘文慧.常用金属橡胶静刚度理论模型比较研究[J].功能材料,2017,48(11):11141-11146.
Yu Hui-jie, Xu Ya-hui, Liu wen-hui. Comparative study on static stiffness theory models of common metal rubber [J]. Functional materials,2017,48(11):11141-11146
[8] 张玲凌，杨智春，孙浩.一类金属橡胶阻尼器的建模与参数识别[J].机械科学与技术,2007(05):558-562.
Zhang Lingling, Yang Zhichun, Sun Hao. Modeling of a type of nonlinear metal rubber damper and its parameter identification [J]. Mechanical Science and Technology for Aerospace Engineering,2007(05):558-562.
[9] 闫辉，姜洪源，刘文剑，等.具有迟滞非线性的金属橡胶隔振器参数识别研究[J].物理学报,2009,58(08):5238-5243.
Yan hui, jiang hongyuan, liu wenjian, et al. Parameter identification of metal rubber isolator with hysteresis nonlinearity [J]. Acta phys. Sin,2009,58(08):5238-5243.
[10] 李冬伟，白鸿柏，杨建春，等.金属橡胶动力学建模及参数识别[J].振动与冲击,2005(06):57-60+138.
Li Dongwei, Bai Hongbai, Yang Jianchun, et.al. Dynamic modeling and parameter identification of metal rubber [J]. Vibration and impact,2005(06):57-60+138.
[11] 路纯红,白鸿柏,胡仁喜.金属橡胶/橡胶复合叠层耗能器动力学模型[J].振动工程学报,2008(05):493-497.
Lu Chunhong, Bai Hongbai, Hu Renxi. Dynamic model of metal rubber/rubber composite laminated energy dissipior [J]. Journal of vibration engineering,2008(05):493-497.
[12] 李玉龙，白鸿柏，何忠波，等. 组合金属橡胶隔振系统参数识别[J].军械工程学院学报,2014,26(03):68-74.
Li yulong, bai hongbai, he zhongbo, et al. Parameter Identification of a New Metal Rubber Damper System [J]. Journal of institute of ormological engineering,2014,26(03):68-74.
[13] 曹凤利，白鸿柏，李冬伟，等. 金属橡胶非成形方向迟滞特性力学模型研究[J].机械工程学报,2015,51(02):84-89
Cao Fengli, Bai Hongbai, Li Dongwei, et al. Research on Mechanical Model of Metal Rubber for Hysteresis Characteristic in the Non-forming Direction [J]. Journal of mechanical engineering,2015,51(02):84-89
[14] 吴荣平，白鸿柏，路纯红. 环形金属橡胶的径向压缩性能及力学模型分析[J].机械科学与技术,2018,37(04):635-640.
Wu Rongping, Bai Hongbai, Lu Chunhong. Analysis of Radial Compressive Properties and Mechanical Model for Ring Metal Rubber [J]. Mechanical Science and Technology for Aerospace Engineering, 2008,37(04):635-640.
[15] 侯军芳， 白鸿柏， 李冬伟, 等. 高低温环境金属橡胶减振器阻尼性能试验研究[J]. 航空材料学报, 2006(6):50-54.
Hou Junfang, Bai Hongbai, Li Dongwei, et al. Test research of damping performance of metal rubber damper at high-low temperature [J]. Journal of aeronautical materials, 2006(6):50-54.
|
|
|
|
