[1]张子龙,任廷志,程加远,等.考虑粒形转化特性的圆锥破碎机层压破碎行为研究[J].机械工程学报,2017,53(16): 173-180.
ZHANG Zilong, REN Tingzhi, CHENG Jiayuan, et al. Research on the inter-particle breakage of cone crusher considering the characteristics of particle shape transformation[J]. Journal of Mechanical Engineering, 2017,53(16): 173-180.
[2]SAFRONOV A N, KAZAKOV S V, SHISHKIN Y V. New trends in inertia cone crusher studies[J]. Mineral Processing Journal, 2012(5): 40-42.
[3]夏晓鸥,蔡美峰.惯性圆锥破碎机的动力学特性分析[J]. 湖南科技大学学报(自然科学版), 2008,23(2): 28-31.
XIA Xiaoou, CAI Meifeng. Dynamics analysis of inertia cone crusher[J]. Journal of Hunan University of Science & Technology (Natural Science Edition), 2008,23(2): 28-31.
[4]SAVOV S, NEDYALKOV P, MININ I. Crushing force theoretical examination in one cone inertial crusher[J]. Journal of Multidisciplinary Engineering Science and Technology, 2015,2(3): 430-437.
[5]BABAEV R M, KISHCHENKO V L. The effect of KID-1500 inertia cone crusher parameters upon preset crushed stone size fraction yield[J]. Mineral Processing Journal, 2012(1): 22-24.
[6]王晓波,罗秀建,夏晓鸥,等.惯性圆锥破碎机动锥的旋转响应[J]. 有色金属(选矿部分), 2015(3): 69-86.
WANG Xiaobo, LUO Xiujian, XIA Xiaoou, et al. Rotating characteristics of inertial cone crusher’s moving cone[J]. Nonferrous Metals (Mineral Processing Section), 2015(3): 69-86.
[7]卫一川.惯性圆锥破碎机有限元分析及优化[D]. 太原: 太原科技大学,2015.
[8]MITREV R, SAVOV S. A theoretical experimental approach for elasto-damping parameters estimation of cone inertial crusher mounting[J]. Facta Universitatis, Series (Mechanical Engineering), 2017,15(1): 73-83.
[9]KAZAKOV S V, SHISHKIN E V. Upon dynamic analysis of vibratory cone crusher based on three-mass system[J]. Mineral Processing Journal, 2016(4): 43-47.
[10]赵月静,秦志英,彭伟.考虑物料层作用的振动圆锥破碎机动力学分析[J]. 振动与冲击,2011,30(9): 232-236.
ZHAO Yuejing, QIN Zhiying, PENG Wei. Dynamic analysis of vibrating cone crusher considering the effect of materials layers[J]. Journal of Vibration and Shock, 2011,30(9): 232-236.
[11]EVERTSSON C M, QUIST J. Cone crusher modelling and simulation using DEM[J]. Minerals Engineering, 2016,85: 92-105.
[12]LI H, MCDOWELL G, LOWNDES I. Discrete element modelling of a rock cone crusher[J]. Powder Technology, 2014,263: 151-158.
[13]CLEARY P W, SINNOTT M D, MORRISON R D. Analysis of cone crusher performance with changes in material properties and operating conditions using DEM[J]. Minerals Engineering, 2017,100: 49-70.
[14]XU L. An approach for calculating the dynamic load of deep groove ball bearing joints in planar multibody systems[J]. Nonlinear Dynamics, 2012,70(3): 2145-2161.
[15]CUNDALL P A, STRACK O D. A discrete numerical model for granular assemblies[J]. Geotechnique, 1980,30(4): 331-336.
[16]NIKRAVESH P E, HAUG E J. Generalized coordinate partitioning for analysis of mechanical systems with nonholonomic constraints[J]. Journal of Mechanisms, Transmissions, and Automation in Design, 1983,105(3): 379-384.
[17]ORIN D E, MCGHEE R B, VUKOBRATOVIC M, et al. Kinematic and kinetic analysis of open-chain linkages utilizing Newton-Euler methods[J]. Mathematical Biosciences, 1972,43(1/2): 107-130.
[18]FLORES P, LEINE R, GLOCKER C. Modeling and analysis of rigid multibody systems with translational clearance joints based on the non-smooth dynamics approach[J]. Multibody System Dynamics, 2009,23(2): 165-190.
[19]CHA H, CHOI S, HAN S, et al. Stick-slip algorithm in a tangential contact force model for multi-body system dynamics[J]. Journal of Mechanical Science and Technology, 2011,25(7): 1678-1694.
[20]CHUNG Y C, WU C W, KUO C Y, et al. A rapid granular chute avalanche impinging on a small fixed obstacle: DEM modeling, experimental validation and exploration of granular stress[J]. Applied Mathematical Modelling, 2019,74: 540-568.
[21]POTYONDY D O, CUNDALL P A. A bonded-particle model for rock[J]. International Journal of Rock Mechanics & Mining Sciences, 2004,41: 1329-1364.
[22]GROOT R D, STOYANOV D S. Close packing density and fracture strength of adsorbed polydisperse particle layers[J]. Soft Matter, 2011,7(10): 4750-4761.
[23]MA Y, HUANG H. DEM analysis of failure mechanisms in the intact Brazilian test[J]. International Journal of Rock Mechanics & Mining Sciences, 2018,102: 109-119.
[24]HANLEY K J, SULLIVAN C O, OLIVEIRA J C, et al. Application of Taguchi methods to DEM calibration of bonded agglomerates[J]. Powder Technology, 2011,210(3): 230-240.
[25]WANG Y, TONON F. Modeling Lac du Bonnet granite using a discrete element model[J]. International Journal of Rock Mechanics & Mining Sciences, 2009,46(7): 1124-1135.
|