绝对节点坐标方法的模型降噪研究

Abstract
Figure/Table
References (23)
Related Citation (15)

Download: PDF (1878 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Absolute nodal coordinate formulation (ANCF) is successfully applied in dynamic problems’ modeling and simulation of large deformation flexible multibody system.However, due to many node parameters and containing complex high-order modes, the system dynamic equation’s stiff problem is prominent.The core step of the existing widely used implicit algorithm is to filter high-frequency response with numerical damping, but the solving efficiency is not satisfactory.Here, based on the idea to filter high frequency components in modeling, the instantaneous stress in virtual power of elastic force was replaced by the average stress in a short time period to derive the absolute nodal coordinate element model denoising formulation containing additional inertia term and additional damping term.Through adjusting time interval length parameter of the average stress, high frequency components in the system equation could be eliminated, and the conventional explicit algorithm could be applied in simulation solving of traditional stiff problems.Numerical examples showed that the proposed absolute nodal coordinate element model denoising formulation can greatly reduce solving difficulty of numerical simulation, ensure calculation accuracy and improve calculation efficiency.


Key words： absolute nodal coordinate formulation (ANCF) high frequency stiff problem numerical damping virtual power of elastic force

Received: 16 June 2020 Published: 15 June 2021

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Zhigang1
	2
	ZHOU Xiang1
	2
	MAO Hongsheng1
	2
	WANG Shengyong1
	SONG Huitao3

Cite this article:

ZHANG Zhigang1,2,ZHOU Xiang1, et al. Model denoising based on absolute node coordinate method[J]. JOURNAL OF VIBRATION AND SHOCK, 2021, 40(11): 139-146.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2021/V40/I11/139

［1］HOWELL L L.Compliant mechanisms［M］.New York: John Wiley and Sons, 2001.
［2］SIMO J C.A finite strain beam formulation.The three-dimensional dynamic problem.Part I［J］.Computer Methods in Applied Mechanics and Engineering, 1985, 49(1): 55-70.
［3］SIMO J C, VUQUOC L.A three-dimensional finite-strain rod model.Part II: computational aspects［J］.Computer Methods in Applied Mechanics and Engineering, 1986, 58(1): 79-116.
［4］ZUPAN E, SAJE M.Integrating rotation from angular velocity［J］.Advances in Engineering Software, 2011, 42(9): 723-733.

［5］CRISFIELD M A, JELENIC G.Objectivity of strain measures in the geometrically exact three-dimensional beam theory and its finite-element implementation［J］.Proceedings: Mathematical, Physical and Engineering Sciences, 1999, 455(1983): 1125-1147.
［6］SHABANA A A, YAKOUB R Y.Three dimensional absolute nodal coordinate formulation for beam elements: theory［J］.Journal of Mechanical Design, 2002, 123(4): 606-613.
［7］YAKOUB R Y, SHABANA A A.Three dimensional absolute nodal coordinate formulation for beam elements: implementation and applications［J］.Journal of Mechanical Design, 2002, 123(4): 614-621.
［8］LAN P，SHABANA A A.Integration of B-spline geometry and ANCF finite element analysis［J］.Nonlinear Dynamics，2010, 61(1/2): 193-206.
［9］兰朋，於祖庆，赵欣.Bézier和B-spline曲线的绝对节点坐标列式有限元离散方法［J］.机械工程学报，2012，48(17):128-134.
LAN Peng, YU Zuqing, ZHAO Xin.Using absolute nodal coordinate formulation elements to model Bézier and B-spline curve for finite element analysis［J］.Journal of Mechanical Engineering, 2012, 48(17): 128-134.
［10］NADA A A.Use of B-spline surface to model large-deformation continuum plates: procedure and applications［J］.Nonlinear Dynamics, 2013, 72(1/2): 243-263.
［11］袁新鼎.刚性常微分方程初值问题的数值解法［M］.北京: 科学出版社，1987.
［12］GROSSI E, SHABANA A A.Analysis of high-frequency ANCF modes: Navier-Stokes physical damping and implicit numerical integration［J］.Acta Mechanica, 2019, 230(7): 2581-2605.
［13］SHABANA A A.ANCF consistent rotation-based finite element formulation［J］.Journal of Computational and Nonlinear Dynamics, 2015, 11(1): 014502.
［14］GEAR C W.Numerical initial value problems in ordinary differential equation［M］.Englewood Cliffs: Prentice-Hall, 1971.
［15］EL-ZAHAR E R, HABIB H M, RASHIDI M M, et al.A comparison of explicit semi-analytical numerical integration methods for solving stiff ODE systems［J］.American Journal of Applied Sciences, 2015, 12(5): 304-320.
［16］NEWMARK N M.A method of computation for structural dynamics［J］.Journal of the Engineering Mechanics Division, 1959, 85(3): 67-94.

［17］WILSON E L，FARHOOMAND I，BATHE K J.Nonlinear dynamic analysis of complex structures［J］.Earthquake Engineering & Structural Dynamics，1973，1: 241-252.
［18］HILBERT H M, HUGHES T J R, TAYLOR R L.Improved numerical dissipation for time integration algorithms in structural dynamics［J］.Earthquake Engineering & Structural Dynamics, 1977, 5(3): 283-292.
［19］CHUNG J, HULBERT G M.A time integration algorithm for structural dynamics with improved numerical dissipation: the generalized-α method［J］.Journal of Applied Mechanics, 1993, 60(2): 371-375.

［20］GARCID D, VALVERDE J, DOMINGUEZ J.An internal damping model for the absolute nodal coordinate formulation［J］.Nonlinear Dynamics, 2005, 42(4): 347-369.
［21］ZHANG Y Q, TIAN Q, CHEN L P, et al.Simulation of a viscoelastic flexible multibody system using absolute nodal coordinate and fractional derivative methods［J］.Multibody System Dynamics, 2009, 21(3): 281-303.
［22］MOHAMED A N A, SHABANA A A.A nonlinear visco-elastic constitutive model for large rotation finite element formulations［J］.Multibody System Dynamics, 2011, 26(1): 57-79.
［23］齐朝晖，曹艳，王刚.多柔体系统数值分析的模型降噪方法［J］.力学学报，2018，50(4): 863-870.
QI Zhaohui, CAO Yan, WANG Gang.Model smoothing methods in numerical analysis of flexible multibody systems［J］.Chinese Journal of Theoretical and Applied Mechanica, 2018, 50(4): 863-870.