|
|
|
| Identification of parameters of explosive JWL state equation based on genetic algorithm |
| CUI Hao1, GUO Rui1, SONG Pu2, GU Xiaohui1, ZHOU Hao1, XING Boyang1 |
1.School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China;
2.Science and Technology on Combustion and Explosion Laboratory, Xi’an Modern Chemistry Research Institute, Xi’an 710065, China |
|
|
|
Abstract In order to obtain the parameters of JWL(Jones-Wilkins-Lee) equation of state (EOS) of detonation products for explosives accurately and conveniently. A method for identifying the parameters of JWL EOS of detonation products for CHNO explosives was proposed based on the Genetic Algorithm and cylinder energy model. Compared with the traditional cylinder test, the cost of obtaining JWL parameters of the explosive can be greatly reduced by this method. The parameters of JWL EOS can be determined when the initial density and detonation velocity of the explosive are known. The JWL parameters of four explosives were identified using this method, and the results show that the deviation of four P-V curves between the identified JWL EOS and standard JWL EOS is small, and the values of determination coefficient of the identified curves are all greater than 0.99. The numerical results show that the radial displacement curves of the outer cylinder wall calculated by identified parameters are close to that calculated by standard parameters, which proves the validity and high precision of the Genetic Algorithm in identifying the parameters of JWL EOS.
|
|
Received: 26 November 2020
Published: 15 May 2022
|
|
|
|
[1] Lee E L, Horning H C, Kury J W. Adiabatic expansion of high explosive detonation products: UCRL-50422 [R].San Francisco: University of California, 1968.
[2] Kury J W , Hornig H C, Lee E L. Metal acceleration by chemical Explosive [C]//Proceeding of 4th Symposium on Detonation. Berlin: Springer, 1965.
[3] 计冬奎，肖川，杨凯，等. 含铝炸药JWL状态方程参数的确定 [J]. 火炸药学报,2012,35(5):49-52.
JI Ddong-kui, XIAO Chuan, YANG Kai, et al. Determination of parameters of JWL equation of state for aluminized explosive [J]. Chinese Journal of Explosives and Propellants, 2012, 35(5): 49-52. (in Chinese)
[4] 南宇翔, 蒋建伟, 王树有, 等. 一种CL-20基压装混合炸药JWL状态方程参数研究 [J]. 含能材料, 2015, 23(6): 516-521.
NAN Yu-xiang, JIANG Jian-wei, WANG Shu-you, et al. JWL equation of state of detonation product for CL-20 based pressed composite explosive [J]. Chinese journal of energetic materials, 2015, 23(6): 516-521. (in Chinese)
[5] 王新颖, 王树山, 徐豫新, 等. RDX基PBX的做功能力及JWL状态方程参数确定 [J]. 爆炸与冲击, 2016, 36(2)：242-247.
WANG Xin-ying, WANG Shu-shan, XU Yu-xin, et al. Power capability and parameters of JWL equation of state for RDX-based PBX [J]. Explosion and Shock Waves, 2016, 36(2): 242-247. (in Chinese)
[6] 王新颖, 王树山, 卢熹. 非标准圆筒装药爆轰驱动的试验研究 [J]. 兵工学报, 2019,40(5):897-903.
Wang Xin-ying, WANG Shu-you, LU Xi. Experimental study of the expansion of Non-standard metal cylinders by detonation [J]. Acta Armamentarii, 2019,40(5):897-903. (in Chinese)
[7] 于川, 刘文翰. RHT-902和Octol炸药爆轰产物JWL状态方程研究 [J]. 爆炸与冲击, 1993, 13(2): 172-177.
YU C, LIU Wen-han. Studies on the JWL equation of state of detonation products for RHT-902 and Octol [J]. Explosion and Shock Waves, 1993, 13(2): 172-177. (in Chinese)
[8] 计冬奎, 高修柱, 肖川,等. 含铝炸药作功能力和JWL状态方程尺寸效应研究 [J]. 兵工学报, 2012, 33(5): 552- 555.
JI Dong-kui, GAO Xiu-zhu, XIAO Chuan, et al. Study on dimension effect of accelerating ability and JWL equation of state for aluminized explosive [J]. Acta Armamentarii, 2012, 33(5): 552-555. (in Chinese)
[9] 南宇翔, 蒋建伟, 王树有, 等. 一种与爆轰参数封闭的JWL方程参数确定方法[J]. 爆炸与冲击, 2015, 35(2):16-22.
NAN Xiang-yu, JIANG Jian-wei, WANG Shu-you, et al. One parameter-obtained method for JW L equation of state considered detonation parameters [J]. Explosion and Shock Waves,2016,35(2): 16-22. (in Chinese)
[10] 温丽晶, 段卓平, 张震宇, 等. 采用遗传算法确定炸药爆轰产物JWL 状态方程参数 [J]. 爆炸与冲击, 2013, 33(1): 130-134．
WEN Li-jing, DUAN Zhuo-ping, ZHANG Zhen-yu, et al. Determination of JWL-EOS parameters for explosive detonation products using genetic algorithm [J]. Explosion and Shock Waves,2013, 33(1): 130- 134. (in Chinese)
[11] 赵铮，陶钢，杜长星．爆轰产物JWL状态方程应用研究 [J].高压物理学报,2009,13(4): 277-282.
ZHAO Zheng, TAO Gang, DU Chang-xing．Application research on JWL equation of state of detonation products [J]. Chinese Journal of High Pressure Physics, 2009, 13 (4): 277-282. (in Chinese)
[12] 王成, 徐文龙, 郭宇飞. 基于基因遗传算法和律状态方程的JWL状态方程参数计算 [J]. 兵工学报, 2017, 38: 167-173.
WANG Cheng, XU Wen-Long, GUO Yu-fei. Calculation of JWL equation of state parameters based on genetic algorithm and equation of state [J]. ACTA ARMAMENTARII, 2017, 38(1): 167-173. (in Chinese)
[13] 沈飞, 王辉, 袁建飞. 一种确定JWL状态方程参数的简易算法 [J]. 振动与冲击, 2014, 33(9): 107-110.
SHEN Fei, WANG Hui, YUAN Jian-fei. A simple method for determining parameters of JWL EOS [J]. Journal of vibration and shock, 2014, 33(9): 107-110. (in Chinese)
[14] 孙承纬, 卫玉章, 周之奎. 应用爆轰物理 [M]. 北京: 国防工业出版社, 2000.
SUN Cheng-wei, WEI Yu-zhang, ZHOU Zhi-kui. Applied detonation physics [M]. Beijing: National Defence Industry Press, 2000. (in Chinese)
[15] 张宝平, 张庆明,黄风雷. 爆轰物理学 [M]. 北京: 兵器工业出版社,2001.
Zhang Bao-ping, ZHANG Qing-ming, HUANG Feng-lei. Explosive physics [M]. Beijing: The Publishing House of Ordnance Industry, 2001. (in Chinese)
[16] Kennedy J E. The Gurney model of explosive output for driving metal [M]. New York, Springer, 1998, 221-257.
[17] Bakhofen J, Weickert C. Effect of an inert material’s thickness and properties on the ratio of energies imparted by a detonation’s 1st and 2st propulsion stages [J]. AIP Conference Proceedings, 2002, 620: 954-967.
[18] Reaugh J E, Souers P C. A constant-density Gurney approach to the cylinder test [J]. Propellants, Explosives, Pyrotechnics, 2004, 29, 124.
[19] Souers P C, Garza R, Hornig, et al. Metal angle correction in the cylinder test [J]. Propellants, Explosives, Pyrotechnics, 2011, 36(1): 9-15.
[20] Castedo R , Natale M , López, L M, et al. Estimation of Jones-Wilkins-Lee parameters of emulsion explosives using cylinder tests and their numerical validation[J]. International Journal of Rock Mechanics and Mining ences, 2018, 112:290-301.
[21] Dobratz B M , Crawford P C. LLNL explosives handbook: properties of chemical explosives and explosive simulants [R]. USA: Lawrence Livermore National Laboratory, 1985.
[22] Souers P C, Lauderbach L, Garza R, et al. Upgraded analytical model of the cylinder test [J]. Propellants, Explosives, Pyrotechnics, 2013, 38(3): 419–424.
[23] Urtiew P A, Hayes B. Empirical estimate of detonation parameters in condensed explosives [J]. Journal of Energetic Materials, 1991, 9(4), 297-317.
[24] Holland J H. Adaptation in natural artificial systems [M]. MIT Press,1975.
[25] 任子武, 伞冶. 自适应遗传算法的改进及在系统辨识中应用研究 [J]. 系统仿真学报, 2006,18(1): 44-46+66.
REN Zi-wu, SAN Ye. Improved adaptive genetic algorithm and its application research in parameter identification [J]. Journal of System Simulation, 2006,18(1):44-46+69. (in Chinese)
[26] 江厚满, 张若琪, 张寿齐. 用遗传算法确定材料物态方程参数 [J]. 高压物理学报, 1998,12(1): 47-53.
JIANG Hou-man, ZHANG Ruo-qi, ZHANG Shou-qi. Applying genetic algorithm to determine parameters in equation of state [J]. Chinese Journal of High Pressure Physics, 1998, 12(1):47 -53. (in Chinese)
[27] Souers P C, Haselman L C. Detonation equation of state at LLNL, UCRL-ID-116113 [R]. USA: Lawrence Livermore National Laboratory, 1994.
[28] 夏桂梅, 曾建潮. 基于锦标赛选择遗传算法的随机微粒群算法 [J]. 计算机工程与应用, 2007, 43(4):51-53.
XIA Gui-mei, ZENG Jian-chao. Stochastic particle swarm optimization algorithm based on genetic algorithm of tournament selection. Computer Engineering and Applications, 2007, 43(4): 51-53. (in Chinese)
[29] 杨平, 许冰, 姜文汉, 等. 遗传算法在自适应光学系统中的应用 [J]. 光学学报, 2007, 27(9): 1628-1632.
YANG Ping, XU Bing, JIANG Wen-han, et al. Study of a Genetic Algorithm Used in an Adaptive Optical System [J]. ACTA OPTICA SINICA, 2007, 27(9): 1628-1632. (in Chinese)
[30] Century Dynamics Inc., AUTODYN Material Library, [DB]. Version17.0, 2016.
|
|
|
|
