L型管路系统动力学有限元建模及基于遗传算法的卡箍支撑位置优化

Abstract
Figure/Table
References (18)
Related Citation (15)

Download: PDF (2963 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In the stage of aero-engine pipeline design, optimizing the supporting position of the hoop can effectively avoid the excitation frequency of the rotor, so as to achieve the goal of reducing pipeline vibration. In this paper, taking the L-type pipeline as the object, the method of establishing the finite element model of the L-type pipeline and realizing the optimization of the hoop supporting position with the goal of avoiding vibration are studied. Firstly, the finite element modeling method of "simulating curved beam with straight beam" for L-type pipeline is proposed. On this basis, the dynamic finite element model of the pipeline system is established by using the springs to simulate the supporting effect of hoop. Then, taking the position of the hoop as the design variable and the difference between the excitation frequency and the first natural frequency of the pipeline as the objective function, an optimization model of the hoop supporting position is established to avoid vibration. Furthermore, the specific process of solving the optimization model based on genetic algorithm is described. Finally, an L-type pipeline with three hoops is taken as an example to verify the rationality of the proposed finite element modeling method. Furthermore, by performing optimization calculation, the optimal hoop position is determined to avoid vibration. At the same time, the "safe region" of hoop is analyzed, and the movable range of each hoop under the condition of vibration avoidance is determined.
Key words: L-type pipeline; finite element modeling; dynamics; genetic algorithm; optimization of hoop position.

Key words： L-type pipeline finite element modeling dynamics genetic algorithm optimization of hoop position.

Received: 25 May 2021 Published: 28 August 2022

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GAO Zhihui1
	2
	WANG Donghai1
	2
	SUN Wei1
	2
	WANG Bo1
	2

Cite this article:

GAO Zhihui1,2,WANG Donghai1, et al. Establishment of a dynamic finite element model of an L-type pipeline system and optimization of hoop supporting position based on the genetic algorithm[J]. JOURNAL OF VIBRATION AND SHOCK, 2022, 41(16): 149-157.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2022/V41/I16/149

[1] 彭刚，于乃江，贾文强. 航空发动机外部管路的结构与动力学特征参数分析[J]. 航空发动机,2017,(5): 1-6.
PENG Gang, YU Naijiang, JIA Naiqiang. Analysis of structural and dynamic characteristic parameters of aeroengine external pipeline [J]. Aeroengine, 2017, (5): 1-6.
[2] 冯凯，郝勇，廉正彬. 航空发动机外部管路调频的有限元计算方法[J]. 航空发动机,2010, (1): 31-33,19.
FENG Kai, HAO Yong, LIAN Zhengbin. Finite element analysis method of frequency modulation for aeroengine external lines [J]. Aeroengine, 2010, (1): 31-33,19.
[3] WU J S, CHIANG L K. Free vibration of a circularly curved Timoshenko beam normal to its initial plane using finite curved beam elements[J]. Computers and Structures, 2004, 82(29): 2525-2540.
[4] FONSECA E.M.M, DE MELO F.J.M.Q. Numerical solution of curved pipes submitted to in-plane loading conditions. Thin-Walled Struct, 2009, 48(2): 103–109.
[5] ZHAI H B, WU Z Y, LIU Y S, et al. Dynamic response of pipeline conveying fluid to random excitation[J]. Nuclear Engineering and Design, 2011, 241(8): 2744-2749.
[6] GAO P X, ZHAI J Y, YAN Y Y, et al. A model reduction approach for the vibration analysis of hydraulic pipeline system in aircraft[J]. Aerospace Science and Technology, 2016, 49: 144-153.
[7] ZHANG Z, ZHOU C C, WANG W X, et al. Optimization design of aeronautical hydraulic pipeline system based on non-probabilistic sensitivity analysis[J]. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 2019, 233(5): 815-825.
[8] 李鑫，王少萍. 基于卡箍优化布局的飞机液压管路减振分析[J]. 振动与冲击, 2013,(1): 14-20.
LI Xin, WANG Shaoping. Vibration control analysis for hydraulic pipelines in an aircraft based on optimized clamp layout[J]. Journal of Vibration and Shock, 2013, (1):14-20.
[9] 权凌霄，张琦玮，李长春，等. 航空液压管路支架参数灵敏度分析及优化[J]. 液压与气动, 2017, (8): 95-99.
QUAN Lingxiao, ZHANG Qiwei, Li Changchun, et al. Sensitivity analysis and optimization for support parameter of aviation hydraulic pipeline [J]. Chinese Hydraulics & Pneumatics, 2017, (8): 95-99.
[10] TANG Z C， LU Z Z， LI D W，et, al. Optimal design of the positions of the hoops for a hydraulic pipelines system[J]. Nuclear Engineering and Design, 2011, 241(12): 4840-4855.
[11] 陈艳秋，朱梓根.基于遗传算法的航空发动机管路优化设计[J].航空动力学报,2002,(4): 421-425.
CHEN Yanqiu, ZHU Zigen. Piping System Design of Aero-Engine Using Genetic Algorithms[J]. Journal of Aerospace Power,2002,(4): 421-425.
[12] 翟红波，刘永寿，李宝辉，等.基于动强度可靠性的输流管道动力优化设计[J].西北工业大学学报,2011,(6): 992-997.
ZHAI Hongbo, LIU Yongshou, LI Baohui. A New and Better Optimized Design Based on Dynamic Strength Reliability for Liquid Conveying Pipeline[J]. Journal of Northwestern Polytechnical University, 2011, (6): 992-997.
[13] ZHANG X T, LIU W, ZHANG Y M, et al. Experimental Investigation and Optimization Design of Multi-Support Pipeline System[J]. Chinese Journal of Mechanical Engineering,2021,34(1): 1-15..
[14] 刘伟，曹刚，翟红波，等.发动机管路卡箍位置动力灵敏度分析与优化设计[J].航空动力学报,2012,(12): 2756-2762.
LIU Wei, CAO Gang, ZHAI Hongbo, et al. Sensitivity analysis and dynamic optimization design of supports' positions for engine pipelines[J]. Journal of Aerospace Power,2012,(12): 2756-2762.
[15] GUO X M, MA H, ZHANG X F, YE Z, FU Q, LIU Z H, HAN Q K.Uncertain Frequency Responses of Clamp-Pipeline Systems Using an Interval-Based Method[J]. IEEE Access,2020,8: 29370-29384.
[16] 高晔,孙伟,马辉.基于实测扫频响应反推管路卡箍支承刚度及阻尼[J].振动与冲击,2020,39(08):58-63.
GAO Ye, SUN Wei, MA Hui. Inverse identification of the pipeline support stiffness and damping of the hoop based on the measured sweep frequency response[J]. Journal of Vibration and Shock,2020,39(08):58-63.
[17] 中华人民共和国工业和信息化部. 民用飞机液压管路系统设计和安装要求: HB 8459-2014[S]. 北京:中国航空综合技术研究所, 2014.
[18] HE G X, CHEN D，LIAO K X, et al. A methodology for the optimal design of gathering pipeline system in old oilfield during its phased development process.[J]. Computers & Industrial Engineering, 2019, 130: 14-34.