时变载荷激励的空调滑片式压缩机用球轴承振动特性分析

Abstract
Figure/Table
References (26)
Related Citation (15)

Download: PDF (4149 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Based on the theory of rolling bearing dynamics, the nonlinear dynamic equations of ball bearing for air-conditioning vane compressor excited by time-varying load were established, and were solved by the Gear Stiff (GSTIFF) variable step integral algorithm. Then, analyzed the effects of structural parameters and working conditions on the vibration characteristics of the ball bearing. The results show that: under time-varying load, the vibration response frequency of the ball bearing is dominated by the time-varying load frequency, which shows forced vibration, and the vibration velocity amplitude is much higher than that under constant load. Among the structural parameters, the original radial clearances significantly effect on the vibration characteristics of the ball bearing, and adopting zero clearance or negative clearance can effectively suppress the impact of time-varying load on the bearing. The cage pocket clearance has little effect on bearing vibration, and there is an optimal cage pocket clearance to minimize cage vibration. Considering the effects of time-varying load, applying an axial preload of 0.3-0.6% dynamic load rating to the ball bearing can achieve the purpose of reducing bearing vibration.

Key words： air-conditioning vane compressor deep groove ball bearing Time-varying load Vibration non-linear dynamics?

Received: 17 November 2021 Published: 15 January 2023

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	TANG Zhilin1
	JIANG Diyong2
	ZHANG Wenhu1
	DENG Sier1
	HU Yusheng3

Cite this article:

TANG Zhilin1,JIANG Diyong2,ZHANG Wenhu1, et al. Vibration characteristics of ball bearing for air conditioning sliding vane compressor excited by time-varying load[J]. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(1): 169-180.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2023/V42/I1/169

[1] 邓四二, 胡余生, 孙玉飞,等. 空调滑片式压缩机用圆柱滚子轴承摩擦功耗特性分析[J]. 兵工学报, 2019, 40(9):1943-1952.
Deng Sier , Hu Yusheng, Sun Yufei, et al. Analysis of frictional power loss characteristics of cylindrical roller bearing for air-conditioning vane compressor [J]. Acta Armamentarii, 2019, 40(9):1943-1952.
[2] 陈刚, 辛电波, 彭学院. 小型制冷压缩机降噪研究现状[J]. 噪声与振动控制, 2007(3):12-15.
Chen Gang, Xin Dianbo, Peng Xxueyuan. Research progress on noise control of the small refrigeration compressor [J]. Noise & Vibration Control, 2007(03):12-15.
[3] 李祥松, 贾光, 周亚辉,等. 滚动转子式压缩机噪音分析与降噪措施的探讨 [J]. 中国工程机械学报, 2009(1):105-108.
Li Xiangsong, Jia Guang, ZHOU Yahui, et al. Investigation into noise analysis and reduction for rolling rotor compressors [J]. Chinese Journal of Construction Machinery, 2009(1):105-108.
[4] Shah D S, Patel V N. Theoretical and experimental vibration studies of lubricated deep groove ball bearings having surface waviness on its races [J]. Measurement, 2018, 129:405-423.
[5] Liu, Jing, Shi Zhifeng, Shao Yimin. A theoretical study for the influence of the combined defect on radial vibrations of a ball bearing[J]. Industrial Lubrication and Tribology, 2018,70(2):339-346.
[6] 邓四二, 卢羽佳, 华显伟,等. 四列角接触球轴承振动特性研究 [J]. 振动与冲击, 2017, 36(9): 1-6.
Deng Sier, Lu Yujia, Hua Xianwei, et al. Vibration characteristics of four-column angular contact ball bearings [J]. Journal of Vibration and Shock, 2017, 36(9): 1-6.
[7] Shah D S , Patel N . A dynamic model for vibration studies of dry and lubricated deep groove ball bearings considering local defects on races [J]. Measurement, 2019.
[8] ZHANG W, DENG S, CHEN G D, et al. Influence of lubricant traction coefficient on cage’s nonlinear dynamic behavior in high-speed cylindrical roller bearing [J]. Journal of Tribology, 2017, 139(6): 061502.
[9] Xu C, Wu T, Yang H, et al. Study on vibration mechanism induced by skidding in pure rolling contact [J]. Tribology International, 2021, 154:106669.
[10] Zhang K, Wu X, Bai X, et al. Effect of the lubrication parameters on the ceramic ball bearing vibration in starved conditions [J]. Applied Sciences, 2020, 10(4):1237.
[11] 邓四二, 孙朝阳, 顾金芳,等. 低噪音深沟球轴承振动特性研究[J]. 振动与冲击, 2015, 34(10):12-19.
Deng Sier , Sun Chaoyang , Gu, Jinfang, et al. Vibration characteristics of low-noise deep groove ball bearings [J]. Journal of Vibration and Shock, 2015, 34(10):12-19.
[12] Xu M , Feng G , He Q , et al. Vibration characteristics of rolling element bearings with different radial clearances for condition monitoring of wind turbine[J]. Applied Sciences, 2020, 10(14):4731.
[13] Patel V N, Tandon N, Pandey R K. Experimental study for vibration behaviors of locally defective deep groove ball bearings under dynamic radial load [J]. Advances in Acoustics and Vibration, 2014:7.
[14] Cui L, A new fatigue damage accumulation rating life model of ball bearings under vibration load [J]. Industrial Lubrication and Tribology, 2020, ahead-of-print(ahead-of-print).
[15] 涂文兵, 梁杰, 罗丫,等. 加速工况下滚动轴承动态载荷特性研究 [J]. 振动与冲击, 2021, 40(9): 152-159.
Tu Wenbing, Liang Jie, Luo Ya, et al. Dynamic load characteristics of rolling bearing under acceleration condition [J]. Journal of Vibration and Shock, 2021, 40(9): 152-159.
[16] Zhang W , Wu Z , Deng S , et al. Safety characteristic evaluation of cage in cylindrical roller bearing at the stage of start-up and stop[J]. Shock and Vibration, 2020(2):1-11.
[17] Govardhan T, Choudhury A. Fault diagnosis of dynamically loaded bearing with localized defect based on defect-induced excitation[J]. Journal of Failure Analysis and Prevention, 2019, 19(3):844–857.
[18] Govardhan T, Choudhury A, D Paliwal. Vibration analysis of dynamically loaded bearing with distributed defect based on defect induced excitation [J]. International Journal of Dynamics and Control, 2018, 6(3): 499–510.
[19] Evans R D, Houpert L, Scandella F, et al. Dynamic analysis of rail gearbox bearings[J]. Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail & Rapid Transit, 2017,231(8):991-996.
[20] 查浩, 任尊松, 徐宁. 高速动车组轴箱轴承振动特性 [J]. 机械工程学报, 2018, 54(16): 144-151.
Zha Hao, Ren Zunsong, Xu Ning. Vibration performance of high-speed vehicles with axle box bearing [J]. Journal of Mechanical Engineering, 2018, 54(16):144-151.
[21] 邓四二，贾群义，薛进学. 滚动轴承设计原理(第二版) ［M］．北京: 中国标准出版社，2014．
Deng Sier，Jia Qunyi，Xue Jingxue. Design theory of rolling bearing [M]. Beijing: Standards Press of China，2014．
[22] C.W. Gear, Simultaneous numerical solution of differential-algebraic equations, IEEE Transactions on Circuit Theory 118(1) (1971):89-95.
[23] 赵联春. 球轴承振动的研究 [D]. 杭州：浙江大学, 2003.
[24] GB/T 32325-2015, 滚动轴承深沟球轴承振动(速度)技术条件[S]. 北京: 中华人民共和国国家质量监督检验检疫总局, 2016.
GB/T 32325-2015, Rolling bearings-Specifications for vibration(velocity) of deep groove ball bearings[S]. Beijing: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, 2016.
[25] 邓四二, 滕弘飞, 王燕霜,等. 新型航空润滑油油膜拖动力计算研究 [J]. 航空动力学报, 2007, 22(5):838-842.
Deng Sier, Teng Hongfei, Wang Yanshuang, et al. Traction calculation of a new aviation lubricating oil [J]. Journal of Aerospace Power, 2007, 22(5):838-842.
[26] 王燕霜, 杨伯原, 王黎钦. 航空润滑油粘温特性动态数据库的建立[J]. 润滑与密封, 2006(1): 45-47.
Wang Yanshuang, Yang Boyuan, Wang Liqin. Establishment of dynamic database on visco-temperature performance of aviation lubricating oils [J]. Lubrication Engineering, 2006(1): 45-47.

[1]	. [J]. JOURNAL OF VIBRATION AND SHOCK, 2024, 43(3): 8-.