基于动力吸振原理的低频多模态抑振器设计

Abstract
Figure/Table
References (19)
Related Citation (15)

Download: PDF (2523 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract For the purpose of structural low-frequency vibration control, a multi-mode suppressor was designed based on the principle of dynamic vibration absorber (DVA). In order to study the vibration suppression effect of DVAs array and vibration suppressors array, dynamic coupling model of four-edge simply supported plate attached with DVAs array was established, vibration control effect of DVAs array was verified; A multi-mode low-frequency vibration suppressor was established, whose main component is rubber plate attached with mass block, rubber base attached with metal cylindrical shell. Axial resonance modal frequency of each component was theoretically calculated, geometrical parameters and material parameters of vibration suppressor was adjusted based on DVA parameters, vibration control effect of vibration suppressors array was verified by simulation and experiment. Results shows that: the best vibration control effect can be reached when biggest deformation location is covered by DVAs array or vibration suppressors array; both DVAs array and the vibration suppressors array have certain vibration control effect, different from the point contact between the vibration absorber and the controlled object, the surface contact amplifies the damping effect in vibration control, so the vibration control effect of the vibration suppressors array is more obvious.

Key words： dynamic vibration absorber (DVA) vibration suppressor multi-mode vibration control rubber base

Received: 17 September 2021 Published: 15 February 2023

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHENG Yipeng1
	PENG Zilong1
	WEN Huabing1
	SONG Hao2
	GUO Yousong3

Cite this article:

CHENG Yipeng1,PENG Zilong1,WEN Huabing1, et al. Design of low-frequency multi-mode vibration suppressor based on dynamic vibration absorption principle[J]. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(3): 150-158.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2023/V42/I3/150

[1] Frahm H. Device for damping vibrations of bodies: US, US989958 A[P]. 1911.
[2] Arnold F R. Steady-state behavior of systems provided with nonlinear dynamic vibration[J]. Journal of Applied Mechanics, 1955, 22(4):487-492.
[3] Pipes L A. Analysis of a Nonlinear Dynamic Vibration Absorber[J]. Journal of Applied Mechanics, 1953, 20(4).
[4] 宋伟志,周辉,赵艳青,赵海军,姚永玉.基于磁流变弹性体变刚度动力吸振器的研究[J].舰船科学技术,2015,37(11):64-68.
SONG Weizhi, ZHOU Hui, ZHAO Yanqing, et al. Research on dynamic vibration absorber with variable stiffness based on magnetorheological elastomer[J]. Ship Science and technology, 2015,37(11):64-68.
[5] Lerner A A, Cunefare K A. Performance of MRE-based Vibration Absorbers[J]. Journal of Intelligent Material Systems and Structures, 2008, 19(5):551-563.
[6] 胡海岩,郭大蕾,翁建生.振动半主动控制技术的进展[J]. 振动、测试与诊断,2001(04):3-12+60.
HU Haiyan, GUO Dalei, WENG Jiansheng. Progress of semi-active vibration control technology[J]. Journal of Vibration, Measurement and Diagnosis, 2001(04): 3-12+60.
[7] 孙志卓,王全娟,王付山.一种主动电磁式动力吸振器的研究与设计[J].振动与冲击,2006(03):198-201+218.
SUN Zhizhuo, WANG Quanjuan, WANG Fushan. Research and design of an active electromagnetic dynamic vibration absorber[J]. Journal of Vibration and Shock, 2006(03):198-201+218.
[8] May C, Kuhnen K, Pagliarulo P, et al. Magnetostrictive dynamic vibration absorber (DVA) for passive and active damping[J]. Acta Acustica, 2003.
[9] Daley S, Johnson F A, Pearson J B, et al. Active vibration control for marine applications[J]. Control Engineering Practice, 2004, 12(4):465-474.
[10] 周荣亚.悬臂梁式动力吸振器多频减振研究[J].噪声与振动控制,2017,37(04):197-200.
ZHOU Rongya. Research on multi-frequency vibration reduction of cantilever beam dynamic vibration absorber[J]. Noise and Vibration Control, 2017, 37(04): 197-200.
[11] 陈文华,牛军川.可调频悬臂梁式动力吸振器多频减振研究[J].噪声与振动控制,2021,41(01):188-193.
CHEN Wenhua, NIU Junchuan. Research on multi-frequency vibration reduction of frequency-adjustable cantilever beam dynamic vibration absorber[J]. Noise and Vibration Control, 2021, 41(01): 188-193.
[12]王光. 橡胶减震器设计与计算[J].机电设备, 1978(04):3-7.
WANG Guang. Design and calculation of rubber shock absorber[J]. Mechanical and Electrical Equipment. 1978(04):3-7.
[13] Leissa A W. Vibration of plates[M]. Scientific and Technical Information Division, National Aeronautics and Space Administration, 1969.
[14] 林孔勇. 橡胶工业手册第六分册: 工业橡胶制品[M]. 化学工业出版社, 1993.
LIN Kongyong. Rubber Industry Handbook, The sixth volume: Industrial rubber product[M]. Chemical Industry Press, 1993
[15] Wang C Y. Vibration of a circular plate with an attached core[J]. Journal of Sound & Vibration, 2005, 280(3-5):1075-1082.
[16] Weisensel G N. Natural frequency information for circular and annular plates[J]. Journal of Sound & Vibration, 1989, 133(1):129-137.
[17]王钰杰,陶猛,符磊,赵雪峰.低频抑振器用于抑制水下薄板振动和声辐射的研究[J].振动与冲击,2020,39(21):233-240.
WANG Yujie, TAO Meng, FU Lei, et al. Low-frequency vibration suppressor applied in suppressing vibration and acoustic radiation of underwater thin plate[J]. Journal of Vibration and Shock, 2020, 39(21): 233-240.
[18]马建刚,盛美萍,韩玉迎.多带隙局域共振单元抑振设计与实验验证[J].振动工程学报,2019,32(06):943-949.
MA Jiangang, SHENG Meiping, HAN Yuying. Design and experimental verification of multiple band gap local resonance unit[J]. Journal of Vibration Engineering, 2019, 32(06): 943-949.
[19]曹志远. 板壳振动理论[M]. 中国铁道出版社, 1989.
CAO Zhiyuan. Vibration theory of plate and shell [M]. China Railway Publishing house Co., 1989

[1]	. [J]. JOURNAL OF VIBRATION AND SHOCK, 2024, 43(2): 35-.