动力传动机构四点接触球轴承的振动特性分析

Abstract
Figure/Table
References (22)
Related Citation (15)

Download: PDF (2380 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The vibration of four-point contact ball bearing for power transmission mechanism was studied. A vibration analysis model of the four-point contact ball bearing considering lubrication was established. Taking QJ214 four-point contact ball bearing as an example, the vibration characteristics of the bearing under different structural parameters and working conditions were analyzed theoretically. The results showed that the smaller the radial clearance and the number of rolling elements of the four-point contact ball bearing, the smaller the bearing vibration; the curvature radius coefficient of the inner and outer ring grooves has a greater influence on the bearing vibration, and a reasonable choice of the inner and outer ring groove curvature radius coefficient can effectively reduce the bearing vibration; lubricant can alleviate vibration impact and reduce the vibration of the bearing; applying a reasonable axial load to the four-point contact ball bearing can reduce the vibration of the bearing.

Key words： Four point contact ball bearing Vibration model Structural parameters；Test verification

Received: 14 December 2021 Published: 28 February 2023

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	TIAN Kaiwen1
	QIU Ming1
	2
	WANG Dongfeng3

Cite this article:

TIAN Kaiwen1,QIU Ming1,2, et al. Analysis of vibration characteristics of four-point contact ball bearings for power transmission[J]. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(4): 39-47.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2023/V42/I4/39

[1] 赵联春. 球轴承振动的研究[D]. 浙江: 浙江大学，2003.
ZHAO Lian-chun. Research on vibration of ball bearing[J]. Zhejiang: Zhejiang University, 2003.
[2] Noguchi S, Hiruma K, Kawa H, et al. The influence of location of balls and ball diameter difference in rolling bearings on the nonrepetitive runout (NRRO) of retainer revolution[J]. Precision Engineering, 2005, 29(1): 11-18.
[3] 余永健，陈国定，李济顺，等. 轴承零件几何误差对圆柱滚子轴承回转误差的影响:第一部分计算方法[J].机械工程学报，2019，55(1): 62-71.
YU Yong-jian, CHEN Guo-ding, LI Ji-shun, et al. Effect of geometric errors of bearing components on motion error of cylindrical roller Bearings part Ⅰ: calculation method[J]. Journal of Mechanical Engineering, 2019, 55(1): 62-71.
[4] 余永健，李济顺，陈国定，等. 圆柱滚子轴承旋转精度数值计算及试验研究[J]. 机械工程学报，2016，52(15): 65-72.
YU Yong-jian, LI Ji-shun, CHEN Guo-ding, et al. Numerical calculation and experimental research of rotational accuracy on cylindrical roller bearing[J]. Journal of Mechanical Engineering, 2016, 52(15): 65-72.
[5] 余永健，李济顺，陈国定，等. 基于内圈滚道廓形的圆柱滚子轴承旋转精度[J]. 航空动力学报，2017(1): 155-161.
YU Yong-jian, LI Ji-shun, CHEN Guo-ding, et al. Rotational accuracy of the cylindrical roller bearing based on inner raceway profile[J]. Journal of Aerospace Power, 2017(1):155-161.
[6] 余光伟，方党生，蔡翔宇，等. 波纹度波数对深沟球轴承振动特性的影响[J]. 轴承，2021(4): 18-22.
YU Guang-wei, FANG Dang-sheng, CAI Xiang-yu, et al. Influence of waviness wave number on vibration characteristics of deep groove ball bearings[J]. Bearing, 2021(04): 18-22.
[7] 侯萍萍. 高速球轴承振动特性及其扩展表征方法研究[D]. 哈尔滨: 哈尔滨工业大学，2020.
HOU Ping-ping. Research on vibration of behavior and extended characterizing method of high-speed ball bearing[D]. Harbin: Harbin Institute of Technology, 2020.
[8] HOU P, WANG L, PENG Q. Vibration analysis of ball bearing considering waviness under high speed and an axial load[J]. Bulletin of the Polish Academy of SciencesTechnical Sciences, 2020, 68(3):517-527.
[9] 王晓明. 精密机床主轴轴承几何误差与旋转精度的关系研究[D]. 洛阳: 河南科技大学，2021.
WANG Xiao-ming. Research on relationship between geometric error and rotation accuracy of precision machine tool spindle bearing[D]. Luoyang: Henan University of Science and Technology，2021.
[10] 顾晓辉，杨绍普，刘永强，等. 表面波纹度对滚动轴承-转子系统非线性振动的影响[J]. 振动与冲击，2014(8)：109-114.
GU Xiao-hui, YANG Shao-pu, LIU Yong-qiang, et al. Effect of surface waviness on nonlinear vibration of a roto with ball bearings[J]. Journal of Vibration and Shock, 2014(8): 109-114.
[11] 陈月，邱明，杜辉，等. 机器人用四点接触球轴承旋转精度影响因素[J]. 中国机械工程，2020，31(14): 1678-1685，1692.
CHEN Yue, QIU Ming, DU Hui, et al. Factors influencing rotation accuracy of four-point contact ball bearings for robots[J]. China Mechanical Engineering, 2020, 31(14): 1678-1685,1692.
[12] 陈月，邱明，田凯文，等. 四点接触球轴承内外圈沟道圆度误差对旋转精度的影响[J]. 机械传动，2020，44(5)： 37-41.
CHEN Yue, QIU Ming, DU Hui, et al. Effect of roundness error of inner and outer raceway on rotation accuracy of four-point contact ball bearing[J]. Journal of Mechanical Transmission, 2020, 44(5): 37-41.
[13] 王献锋，魏庆玲，刘明. 三点四点接触球轴承接触角和游隙的计算[J]. 轴承，2006(6): 8-10.
WANG Xian-feng, WEI Qing-ling, LIU Ming. Calculation of angular and clearance of three/four points contact ball bearing[J]. Bearing, 2006(6): 8-10.
[14] 姚龙. 薄壁四点接触球轴承参数化设计与动力学分析[D]. 昆明: 昆明理工大学，2019.
YAO Long. Parametric design and dynamic analysis of thin wall four-point contact ball bearings[D]. Kunming: Kunming University of Science and Technology, 2019.
[15] 郭明月. 深沟球轴承结构参数对振动规律影响的仿真与试验研究[D]. 中国计量学院，2014.
Guo Mingyue. Simulation and testing study of the effect of deep groove ball bearing structure parameters on the vibration rule[D]. Hangzhou: China Jiliang University, 2014.
[16] 邓四二. 滚动轴承设计原理（第二版）[M]. 北京: 中国标准出版社，2014.
[17] 陈於学. 基于接触力学的圆柱滚子轴承振动研究[D]. 武汉: 华中科技大学，2005.
CHEN Yu-xue. Research on vibrations of cyclindrical roller bearings based on contact mechanics[D]. Wuhan: Huazhong University of Science and Technology, 2005.
[18] 杜秋华. 球轴承振动的非线性模型及信号分析方法研究[D]. 武汉: 华中科技大学，2007.
DU Qiu-hua. Research on nonlinear models and signal analysis methods of ball bearing vibrations[D]. Wuhan: Huazhong University of Science and Technology, 2007.
[19] Liu J, SHAO Y M, LIM T C. Vibration analysis of ball bearings with a localized defect applying piecewise response function[J]. Mechanism and Machine Theory, 2012, 56: 156-169.
[20] HARSHA S P, SANDEEP K, PRAKASH R. Non-linear dynamic behaviors of rolling element bearings due to surface waviness[J]. Journal of Sound and Vibration, 2004, 272(3): 557-580.
[21] 邓四二，孙朝阳，顾金芳，等. 低噪音深沟球轴承振动特性研究[J]. 振动与冲击，2015，34(10): 12-19.
DENG Si-er, SUN Chao-yang, GU Jin-fang, et al. Vibration characteristics of low-noise deep groove ball bearings[J]. Journal of Vibration and Shock, 2015, 34(10): 12-19.
[22] ZHENG D X, CHEN W F, XIAO G Y, et al. Effect of vibration on power loss of angular contact ball bearings[J]. Industrial Lubrication and Tribology, 2020, 72(5): 657-664.