失谐整体叶盘的改进子结构建模方法

Abstract
Figure/Table
References (39)
Related Citation (15)

Download: PDF (2993 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract An improved substructure modeling and analysis method is proposed to reduce the computational cost in vibration analysis of a complex mistuned blisk. The blisk is divided into blade substructures and a disk substructure according to the geometric feature. Then, the reduced interfacial degrees of freedom are evenly selected and transformed into internal degrees of freedom of substructure by the coordinate transformation matrix. Finally, the substructure method is used to condense the internal degrees of freedom of the substructure and the interface, and the reduction model of the blisk is established. The mistuning level of the blisk was evaluated under typical hazardous excitation cases by using the improved substructure analysis model. The results show that this proposed method can efficiently analyze the dynamic response of the mistuned blisk while ensuring computational accuracy.

Key words： substructure interface reduction mistuned blisk amplitude control

Received: 03 March 2022 Published: 28 June 2023

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	JIA Zichu
	LIANG Daosen
	CAO Zhifu
	YAO Jianyao

Cite this article:

JIA Zichu,LIANG Daosen,CAO Zhifu, et al. An improved substructure modeling method for mistuned blisk[J]. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(12): 299-308.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2023/V42/I12/299

[1] Hohl A, Panning L, Wallaschek J. Analysis of the influence of blade pattern characteristics on the forced response of mistuned blisks with a cyclic cms-based substructure model[C]// ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis. 2010, 49194: 443-455.
[2] BAI Bin, ZHANG Chuan-hui. Application of improved dynamic substructure finite element model-based state-space techniques in mistuned blisks[J]. International Journal of Aerospace Engineering, 2020, 2020: 8817531.
[3] Jung C, Saito A, Epureanu B I. Detection of cracks in mistuned bladed disks using reduced-order models and vibration data[J]. Journal of Vibration and Acoustics, 2012, 134(6): 061010.
[4] Schoenenborn H, de Vries M. Aeroelasticity at reversed flow conditions—part III: reduction of surge loads by means of intentional mistuning[J]. Journal of Turbomachinery, 2013, 135(4): 041009.
[5] ZANG Chao-ping, TAN Yuanqiu, Petrov E P. Analysis of forced response for bladed disks mistuned by material anisotropy orientation scatters[J]. Journal of Engineering for Gas Turbines and Power, 2018, 140(2) : 022503.
[6] 姚建尧,高阳,王建军.航空发动机失谐叶盘动态特性研究进展[J].航空制造技术, 2016, 59(21): 76-85.
YAO Jian-yao, GAO Yang, WANG Jian-jun. A review of dynamic characteristics of mistuned bladed disks[J]. Aeronautical Manufacturing Technology, 2016, 59(21): 76-85.
[7] Castanier M P, Pierre C. Modeling and analysis of mistuned bladed disk vibration: current status and emerging directions[J]. Journal of Propulsion and power, 2006, 22(2): 384-396.
[8] Vargiu P, Firrone C M, Zucca S, et al. A reduced order model based on sector mistuning for the dynamic analysis of mistuned bladed disks[J]. International Journal of Mechanical Sciences, 2011, 53(8): 639-646.
[9] DENG Shi-yuan, YAO Jian-yao,WANG Lin-lin, et al. Comparative studies of surrogate models for response analysis of mistuned bladed disks[J]. International Journal of Computational Methods,2020,17(10).
[10] 刘佳雯,李若愚,姚建尧.应用于随机失谐叶盘振动分析的代理模型研究（英文）[J].风机技术,2019,61(04):52-58.
LIU Jia-wen, LI Ruo-yu, YAO Jian-yao. Surrogate models for vibration analysis of randomly mistuned bladed disk[J]. Chinese Journal of Turbomachinery, 2019, 61(4):52-58.
[11] GAO Jun-nan, GAO Ye, YAN Xian-fei, et al. Reduced order models for largely mistuned blisks with small random mistuning[J]. AIAA Journal, 2020, 58(6): 2691-2701.
[12] Gutierrez Salas M, Petrie-Repar P, Mårtensson H, et al. Forced response analysis of a mistuned blisk using noncyclic reduced-order models[J]. Journal of Propulsion and Power, 2018, 34(3): 565-577.
[13] JIE Yuan, Scarpa F, Allegri G, et al. Efficient computational techniques for mistuning analysis of bladed discs: a review[J]. Mechanical Systems and Signal Processing, 2017, 87: 71-90.
[14] LI Ruo-yu, YAO Jian-yao, WANG Linlin, et al. A novel gap element for the coupling of incompatible interface in component mode synthesis method[J]. International Journal of Computational Methods, 2020, 17(07): 1950033.
[15] Hurty W C. Vibrations of structural systems by component mode synthesis[J]. Journal of the Engineering Mechanics Division, 1960, 86(4): 51-69.
[16] Craig Jr R R, Bampton M C C. Coupling of substructures for dynamic analyses[J]. AIAA journal, 1968, 6(7): 1313-1319.
[17] Bucher C U A. A modal synthesis method employing physical coordinates, free component modes, and residual flexibilities[J]. Computers & structures, 1986, 22(4): 559-564.
[18] MacNeal R H. A hybrid method of component mode synthesis[J]. Computers & Structures, 1971, 1(4): 581-601.
[19] de Klerk D, Rixen D J, Voormeeren S N. General framework for dynamic substructuring: history, review and classification of techniques[J]. AIAA Journal, 2008, 46(5): 1169-1181.
[20] Óttarsson G. Dynamic modeling and vibration analysis of mistuned bladed disks[D]. University of Michigan, 1994.
[21] BAI Bin, ZHANG Jun-yi, CUI Yan-chao, et al. Vibration characteristics investigation of mistuned blisks with receptance substructure component modal synthesis method[J]. Journal of Mechanical Science and Technology, 2020, 34(7): 2715-2729.
[22] 李琳,盛君.混合界面直接分支模态综合法[J].应用力学学报, 2005, 22(2): 315-319.
LI Lin, SHENG Jun. Mixed interface direct component modal synthesis method[J]. Chinese Journal of Applied Mechanics, 2005, 22(2): 315-319.
[23] Craig, R. and Chang, C. Substructure coupling for dynamic analysis and testing[C], NASA, TR CR-2781, 1977.
[24] Castanier M P, Tan Y C, Pierre C. Characteristic constraint modes for component mode synthesis[J]. AIAA Journal, 2001, 39(6): 1182-1187.
[25] Hong S K, Epureanu B I, Castanier M P. Next-generation parametric reduced-order models[J]. Mechanical Systems and Signal Processing, 2013, 37(1-2): 403-421.
[26] Marinescu O, Epureanu B I, Banu M. Reduced order models of mistuned cracked bladed disks[J]. Journal of Vibration and Acoustics, 2011, 133(5): 051014.9.
[27] CHEN Yu-gang, WU Hong-chun, ZHAI Jing-yu, et al. Vibration reduction of the blisk by damping hard coating and its intentional mistuning design[J]. Aerospace Science and Technology, 2019, 84: 1049-1058.
[28] 徐昆鹏,孙伟,高俊男,等.基于构件模态失谐模型的涂层整体叶盘失谐辨识[J].振动与冲击,2019,38(14):118-124.
XU Kun-peng, SUN Wei, GAO Jun-nan, et al. Mistuning identification of a coating blisk based on the component mode mistuning model[J]. Journal of Vibration and Shock, 2019, 38(14): 118-124.
[29] LI Lin, DENG Peng-cheng, LIU Jiu-zhou, et al. Theoretical study of the vibration suppression on a mistuned bladed disk using a bi-periodic piezoelectric network[J]. International Journal of Turbo & Jet-Engines, 2018, 35(1): 17-28.
[30] 白斌, 白广忱, 费成巍, 等. 改进的混合界面子结构模态综合法在失谐叶盘结构动态特性分析中的应用[J]. 机械工程学报, 2015, 51(9): 73-81.
BAI Bin, BAI Guang-chen, FEI Cheng-wei, et al. Application of improved hybrid interface substructural component modal synthesis method in dynamic characteristics analysis of mistuned bladed disk assemblies[J]. Journal of Mechanical Engineering, 2015, 51(9): 73-81.
[31] 聂文伟,曹芝腑,姜东,等. 基于重复子结构的缝合式夹芯板动态特性计算[J]. 复合材料学报, 2020, 37(2): 482-491.
NIE Wen-wei, CAO Zhi-fu, JIANG Dong, et al. Vibration performance analyzing of stitched sandwich panel based on repetitive substructure[J]. Acta Materiae Compositae Sinica, 2020, 37(2): 482-491.
[32] Simon D, Cost T. Selection of characteristic constraint modes for component mode synthesis using a modification of effective interface mass[C]//46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 2005: 2343.
[33] 李若愚,刘佳雯,姚建尧.应用于几何失谐叶盘振动分析的考虑预应力的模态综合法（英文）[J].风机技术,2019,61(5):72-78.
LI Ruo-yu, LIU Jia-wen, YAO Jian-yao. Application of mode synthesis method for vibration analysis of geometrically mistuned bladed disk considering the prestress[J]. Chinese Journal of Turbomachinery, 2019, 61(5):72-78.
[34] Jones K W, Cross C J. Traveling wave excitation system for bladed disks[J]. Journal of Propulsion and Power, 2003, 19(1): 135-141.
[35] Judge J A, Pierre C, Ceccio S L. Experimental mistuning identification in bladed disks using a component-mode-based reduced-order model[J]. AIAA Journal, 2009, 47(5): 1277-1287.
[36] ZHANG Hong-yuan, YUAN Hui-qun, YANG Wen-jun, et al. Study on localization influences of frequency veering on vibration of mistuned bladed disk[J]. Journal of Mechanical Science and Technology, 2017, 31(11): 5173-5184.
[37] 高阳,姚建尧,杨诚,等.小失谐对整体叶盘结构动态特性的影响[J].航空动力学报,2018,33(07):1566-1574.
GAO Yang, YAO Jian-yao, YANG Cheng, et al.Influences of small mistuning on dynamic characteristicsof bladed disks[J]. Journal of Aerospace Power, 2018, 33(7): 1566-1574.
[38] YAO Jian-yao, WANG Jian-jun, LI Qi-han. Improved modal localization and excitation factors for understanding mistuned bladed disk response[J]. Journal of Propulsion and Power, 2011, 27(1): 50-60.
[39] 梁道森,潘云璨,张誉瀚,等.基于压缩感知的整体叶盘多模态振动叶尖定时信号重构方法[J].推进技术:1-12.
LIANG Dao-sen. PAN Yun-can, ZHANG Yu-han, et al. Multi-modal vibration tip timing signal reconstruction method for blisk based on compressed sensing[J/OL]. Journal of Propulsion Technology: https://doi.org/10.13675/j.cnki.tjjs.200028.