叶片出口梯形切割对离心泵蜗壳流激噪声影响的研究

Abstract
Figure/Table
References (25)
Related Citation (15)

Download: PDF (4190 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to explore the influence of trapezoidal cutting at the blade outlet on the flow induced noise of centrifugal pump volute, a single-stage single suction centrifugal pump with specific speed of 66 was taken as the object, the cutting width coefficient and radial height coefficient were defined δ and γ,nine cutting schemes were designed. Based on RNG k-ε turbulence model, the three-dimensional unsteady numerical simulation of centrifugal pump was carried out. On this basis, the boundary element method (BEM) was used to calculate the internal field noise, and the structural finite element (FEM) coupled acoustic boundary element method was used to calculate the external field flow induced noise. The hydraulic characteristics and noise radiation characteristics of centrifugal pump under different cutting schemes were analyzed, and the accuracy of numerical calculation was verified by experimental method. The research shows that the rotor-stator interaction was the main cause of the flow induced noise of the volute of the centrifugal pump. The reasonable trapezoidal cutting of the blade outlet can basically stabilize the hydraulic performance of the centrifugal pump and effectively reduce the rotor-stator interaction intensity and the flow induced noise level of the volute. The sound pressure level at the inlet and outlet monitoring points at the blade frequency decreased by 13% and 7.5% respectively, and the sound pressure level at the field noise monitoring points decreased by 2.4%.

Key words： centrifugal pump trapezoidal cutting rotor-stator interaction pressure fluctuation acoustic vibration couple

Received: 11 May 2022 Published: 15 July 2023

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GUO Rong1
	2
	LI Xiaobing1
	LIU Xiang1
	LI Tianpeng1

Cite this article:

GUO Rong1,2,LI Xiaobing1, et al. Effects of trapezoidal cutting at blade outlet on flow-induced noise of centrifugal pump volute[J]. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(13): 82-91.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2023/V42/I13/82

[1] 蒋爱华,张志谊,章艺,等.离心泵噪声研究的综述和展望[J].振动与冲击,2011, 30(02) :77-84.
JIANG Aihua, ZHANG Zhiyi, ZHANG Yi, et al. Review and Prospect of centrifugal pump noise research [J]. Journal of Vibration and Shock, 2011, 30(02): 77-84.
[2] GUO Chao, GAO Ming, HE Suoying. A Review of the Flow-Induced Noise Study for Centrifugal Pumps[J]. Applied Sciences, 2020, 10(3).
[3] 郎涛,刘玉涛,陈刻强,等.离心泵水动力噪声研究综述[J].排灌机械工程学报,2021,39(1):8-15.
LANG Tao, LIU Yutao, CHEN Keqiang, et al. Review of research on hydrodynamic noise of centrifugal pump [J]. Journal of drainage and irrigation mechanical engineering, 2020, 10(3).
[4] DAI Cui, GUO Chao, CHEN Yiping, et al. Analysis of the Influence of Different Bionic Structures on the Noise Reduction Performance of the Centrifugal Pump[J]. Sensors, 2021, 21(3).
[5] CHENG Xiaorui, LI Tianpeng, WANG Peng. Study on the influence of blade outlet cutting on hydraulic noise of centrifugal pump with low specific speed[J]. Advances in Mechanical Engineering, 2020, 12(9).
[6] LU Jiaxing, LIU Xiaobing, ZENG Yongzhong, et al. Investigation of the Noise Induced by Unstable Flow in a Centrifugal Pump[J]. Energies, 2020, 13(3).
[7] LUAN Hengxuan, CHEN Qingguang, WENG Liyuan, et al. Numerical computation of the flow noise for the centrifugal pump with considering the impeller outlet width[J]. Journal of Vibroengineering, 2016, 18(4).
[8] 王春林,刘轲轲,罗波,等.液下泵内部非定常流动及噪声特性[J].排灌机械工程学报, 2020, 38(05): 439-444.
WANG Chunlin, LIU Keke, LUO Bo, et al. Unsteady flow and noise characteristics in submerged pump [J]. Journal of drainage and irrigation mechanical engineering, 2020, 38(05): 439-444.
[9] 张金凤,贾静,胡日新,等.立式管道泵流动噪声特性与仿生降噪研究[J].农业机械学报,2018,49(09):138-145.
ZHANG Jinfeng, JIA Jing, HU Rixin, et al. Flow noise of pipeline pump and bionic sound optimization [J]. Transactions of the Chinese Society of Agricultural Machinery, 2018,49(09):138-145.
[10] 郭荣,李仁年,张人会.射流离心泵动静叶栅匹配的水力与声学性能优化设计[J].农业机械学报, 2019, 50(5):148-158.
GUO Rong, LI Rennian, ZHANG renhui. Hydraulic and acoustic performance optimization design of matching between dynamic and static cascades of jet centrifugal pump [J]. Transactions of the Chinese Society of Agricultural Machinery, 2019, 50(5): 148-158.
[11] LIU Houlin, CHENG Zhiming, GE Zhipeng. Collaborative improvement of efficiency and noise of bionic vane centrifugal pump based on multi-objective optimization[J]. Advances in mechanical engineering, 2021, 13(2).
[12] LIN P F, SONG P F. Research on the Rotor-Stator Interaction of Centrifugal Pump based on Sinusoidal Tubercle Volute Tongue[J]. Journal of applied fluid mechanics, 2021, 14(2):589-600.
[13] 张金凤,蔡海坤,陈圣波,等.长短叶片尾缘形状对离心泵性能与动静干涉的影响[J].农业机械学报,2020,51(4):122-130+190.
ZHANG Jinfeng, CAI Haikun, CHEN Shengbo, et al. Influence of Long and Short Blades Trailing Edge Shape on Performance and Rotor stator Interaction in Centrifugal Pump[J]. Transactions of the Chinese Society of Agricultural Machinery, 2020, 51(4):122-130+190.
[14] SI Qiaorui, SHEN Chunhao, HE Xiaoke, et al. Numerical and Experimental Study on the Flow-Induced Noise Characteristics of High-Speed Centrifugal Pumps[J]. Applied sciences-basel, 2020, 10(9).
[15] 谈明高,陆友东,吴泽瑾,等.叶片数对离心泵振动噪声性能的影响[J].农业工程学报,2019,35(23):73-79+320.
TAN Gaoming, LU Youdong, WU Zejin, et al. Effect of blade number on vibration and noise performance of centrifugal pump [J] Journal of agricultural engineering, 2019,35 (23): 73-79 + 320.
[16] 程效锐,李天鹏,刘向,等.声振耦合作用下叶片出口斜切对离心泵噪声的研究[J]. 声学技术, 2021, 40(6):843-850.
CHENG Xiaorui, LI Tianpeng, LIU Xiang, et al. Study on noise of centrifugal pump caused by blade outlet oblique cutting under sound vibration coupling [J]. Acoustic technology, 2021, 40(6): 843-850.
[17] 黄浩钦,刘厚林,王勇,等.叶片出口边侧斜对船用离心泵振动和水动力噪声的影响[J].振动与冲击,2015,34(12):195-200.
HUANG Haoqin, LIU Houlin, WANG Yong, et al. Influence of blade outlet side slope on vibration and hydrodynamic noise of marine centrifugal pump [J]. Journal of Vibration and Shock, 2015, 34(12): 195-200.
[18] WEI Yiku, ZHU Lingling, ZHANG Wei, et al. Numerical and experimental investigations on the flow and noise characteristics in a centrifugal fan with step tongue volutes[J].Proceedings of the institution of mechanical engineers, Part c: Journal of mechanical engineering science, 2020, 234(15):2979-2993.
[19] Pinto Runa Nivea, Afzal Asif D'Souza, Loyan Vinson, et al. Mohammed Samee. Computational Fluid Dynamics in Turbomachinery: A Review of State of the Art [J]. Archives of Computational Methods in Engineering, 2017, 24(3).
[20] 吕琳.ANSYS有限元结构分析及实例解析[M].化学工业出版社,2014.
LU Lin. ANSYS finite element structural analysis and example analysis [M]. Chemical Industry Press, 2014.
[21] 钟思阳, 黄迅. 气动声学和流动噪声发展综述:致初学者[J]. 空气动力学学报, 2018, 36(03): 363-371.
ZHONG Siyang, HUANG Xun. A review of the development of aeroacoustics and flow noise: to beginners [J]. Journal of aerodynamics, 2018, 36(03): 363-371.
[22] 张德胜,张乃舒,许彬,等.基于Lighthill声类比理论的喷水推进泵不稳定流动诱导噪声的数值研究[J].振动与冲击,2021,40(10):278-287.
ZHANG Desheng, ZHANG Naishu, XU Bin, et al. Numerical study on unsteady flow induced noise of water jet propulsion pump based on Lighthill acoustic analogy theory [J]. Journal of Vibration and Shock, 2021, 40(10): 278-287.
[23] ALI A, SI Q, YUAN J, et al. Investigation of energy performance, internal flow and noise characteristics of miniature drainage pump under water–air multiphase flow:design and part load conditions[J]. International Journal of Environmental Science and Technology, 2021.
[24] 仝帆,乔渭阳,王良锋,等.仿生学翼型尾缘锯齿降噪机理[J].航空学报, 2015, 36(09): 2911-2922.
TONG Fan, QIAO Weiyang, WANG Liangfeng, et al. Mechanism of noise reduction of tail edge sawtooth of bionic airfoil [J]. Journal of Aeronautics, 2015, 36(09): 2911-2922.
[25] GUO Rong, LI Rennian, HAN Wei. Numerical Study of the Unsteady Flow Characteristics of a Jet Centrifugal Pump under Multiple Conditions[J]. PROCESSES, 2019, 7(11).