考虑设计与布局参数的二级减速器动力学优化

Abstract
Figure/Table
References (22)
Related Citation (15)

Download: PDF (2721 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to study the dynamic performance optimization method of multistage fixed-axle gear train,a parametric dynamics model including gear design parameters (number of teeth,modulus,tooth width) and system layout parameters (gear installation position,interstage phase Angle) was established by using the generalized finite element method. Newmark-β time domain integral method was used to solve the dynamic equation at rated speed,and the influence of each parameter on the dynamic characteristics of the system was analyzed. On this basis,the multistage fixed axis gear system dynamic optimization method is proposed,taking design and layout parameters as variables,reducer gear ratio,the diameter of axle width as constraint conditions,such as dynamic load amplitude and minimum on bearing load difference as the main target,multi-objective hybrid discrete optimization model is established, and obtain the optimal design variables based on bayesian algorithm programming model. The results show that the amplitude of the first stage meshing force of the optimized reducer is reduced by 18.9%,the amplitude of the second stage meshing force is reduced by 17.2%,and the load difference of bearings on both sides of shafting is reduced by 36%,40% and 45% respectively. The mass decrease by 8.7%,the volume of boundary box decrease by 27%,and the optimization effect is obvious.

Key words： Multi-objective optimization Parametric dynamic model Layout parameter Dynamic performanc e Bayesian algorithm

Received: 24 February 2022 Published: 15 July 2023

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	JIN Pengcheng
	ZHOU Jianxing
	QI Le
	WANG Shengnan
	ZHOU Hengyu
	SONG Lirui

Cite this article:

JIN Pengcheng,ZHOU Jianxing,QI Le, et al. Dynamic optimization of two-stage reducer considering design and layout parameters[J]. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(13): 259-268.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2023/V42/I13/259

[1] Eugeniusz Switonski,Arkadiusz Mezyk. Selection of optimum dynamic features for mechatronic drive systems[J].Auto-mation in construction,2008,17(3)：
[2] 王勇,许蕴梅.随机振动最小为目标的齿轮系统优化[J].山东大学学报, 2003, 33(3)：257-260.
Wang Yong,Xu Yun-mei. Optimization for gear system with a minimum stochastic vibration[J].Journal of Shandong University(Engineering Science),2003,33(3)：257-260.
[3] 张庆伟,张博,王建宏,等.风力发电机齿轮传动系统的动态优化设计[J]. 重庆大学学报, 2010, 33(3)：30-35.
Zhang Qing-wei,Zhang Bo,Zhang Jian-hong,et al. Dynamic optimization design of gear transmission system for wind turbine[J].Journal of Chongqing University, 2010,33(3)： 30-35.
[4] NERIVA S V, BHAT R B, SANKAR T S. The coupled torsional–flexural vibration of a geared shaft system using finite element method[J].The Shock and Vibration Bulletin, 1985, 55(3)：13-25.
[5] Kubur M.,Kahraman A.,Zini D. M.,Kienzle K.. Dynamic Analysis of a Multi-Shaft Helical Gear Transmission by Finite Elements：Model and Experiment[J]. Journal of Vibration and Acoustics,2004,126(3)：
[6] 常乐浩,贺朝霞,刘更.平行轴齿轮传动系统动力建模的有限单元法[J], 振动与冲击, 2016, 35 (20)：47-53.
Chang Le-hao, HE Zhao-xia, LIU Geng. Parallel shaft gear transmission system for dynamic modeling Finite element method[J]. Journal of Vibration and Shock. 2016, 35 (20)： 47-53.
[7] Savsani V, Rao R V, Vakharia D P. Optimal weight design of a gear train using particle swarm Optimization and simulated annealing algorithms[J].Mechanism and machine theory, 2010, 45(3)：531-541
[8] Bozca M. Torsional vibration model based optimization of gearbox geometric design parameters to reduce rattle noise in an automotive transmission[J]. Mechanism and Machine Theory, 2010, 45(11)：1583-1598.
[9] 王安麟,蒋涛,昝鹏宇,等.大型行星齿轮系统可靠性设计的多目标优化[J]. 中国工程机械学报, 2009, 7(3)：253-257.
Wang An-lin,Jiang Tao,Zan Peng-yu,et al. Multi-objective optimization in reliability design for large-scale planetary gear transmission system [J]. Chinese Journal of Constr-uction Machinery,2009,7(3)：253-257.
[10] 秦大同,赵勇.盾构机刀盘驱动多级行星齿轮传动系统的多目标优化[J].中国机械工程, 2012, 23(1)：12-17.
Qin Da-tong,Zhao Yong. Multi-objective Optim-ization of Multi-stage Planetary Gear Train Used in Shield Machine Cutter Driver[J]. China Mechanical Engineering,2012,23(1)：12-17.
[11] 王颖,王三民,郭家舜,等.高速重载齿轮传动多目标优化设计研究[J].机械设计与制造, 2012, (9)：7-9.
Wang Ying,Wang San-min,Guo Jia-shun,et al. Research on Multi-Objective Optimization Design of High-Speed and Heavy-Duty Gear Transmissions[J]. Machinery Design ＆ Manufacture, 2012, (9)：7-9.
[12] 乔自珍.多源时变激励下两级直齿轮传动系统有限元建模方法研究[D].新疆大学,2020.
Qiao Zi-zhen.Research on Finite Element Modeling Method of Two-stage Supr Gear Transmission System under Multi-source Time-varying Excitation[D].Xin jiang University, 2020
[13] 万志国,訾艳阳,曹宏瑞,何正嘉,王帅.时变啮合刚度算法修正与齿根裂纹动力学建模[J].机械工程学报,2013,49(11)：153-160.
Wan Zhi-guo,Zi Yan-yang,Cao Hong-rui,He Zheng-jia,Wang Shuai. Time-varying Mesh Stiffness Algorithm Correction and Tooth Crack Dynamic Modeling [J].Journal of Mechanical Engineering, 2013,49(11)：153-160.
[14] 王胜男,阿达依•谢尔亚孜旦，章翔峰,周建星.考虑轴柔性的二级齿轮减速器振动噪声研究[J/OL].西安交通大学学报, 2020(09)： 1-9 [2020- 08-12].
Wang Sheng-nan,Adayi Xieeryazidan,Zhang Xiangfeng, Zhou Jian-xing.Vibration and Noise Analysis for Two-stage Gear Reducer Considering Shaft Flexibility[J/OL]. Journal of Xi’an Jiaotong University, 2020(09)：1-9 [2020-08-12].
[15] 王胜男,周建星,阿达依•谢尔亚孜旦.两级齿轮减速器级间耦合振动噪声特性分析[J].新疆大学学报(自然科学版)(中英文),2020,37(04)：551-561.
Wang Sheng-nan,Zhou Jian-xing,Adayi Xieeryazidan. Cou-pling Vibration and Noise Characteristics Analysis of Two-Stage Gear Reducer[J].Journal of Xinjiang Univer-sity(Natural Science Edition in Chinese and Engl-ish),2020.37(04)：551-561.
[16] 李润方,王建军.齿轮系统动力学[M].北京：科学教育出版社, 1997.
[17] FORRESTER A, KEANE A. Recent advances in surrogate-based optimization[J]. Progress in Aerospace Sciences, 2009.
[18] 王秋实.渐开线直齿轮接触动态特性有限元分析[D].浙江大学,2015.
Wang Qiu-shi.Finite Element Contact Dynamic Char-acreristics Analysis of Involute Spur Gears[D]. Zhejiang Univer-sity,2015.
[19] 韩琳,刘更,杨小辉,韩冰.多级圆柱齿轮系统重量优化及目标函数的形式对优化结果的影响研究[J].西北工业大学学报,2019,37(05)：886-896.
Han Lin,Liu Geng,Yang Xiao-hui,Han Bing. Research on Weight Optimization of Multi-Stage Cylindrical GearDrive and Effect of Objective Function Form on Optimization Results[J].Journal of Northwestern Polytechnical Uni-versity,2019.37(05)：886-896.
[20] Swersky K, Snoek J, Adams R P. Multi-task bayesian Optimization[C]//Advances in neural information proce-ssing system. 2013:2004-2012.
[21] Shahriari, Bobak,Swersky, Kevin,Wang, Ziyu,Adams, Ryan P.,de Freitas, Nando. Taking the Human Out of the Loop： A Review of Bayesian Optimization[J]. Procee-dings of the IEEE,2016,104(1)：
[22] Srinivas, N.. Information-Theoretic Regret Bounds for Gaussian Process Optimization in the Bandit Setting[J]. IEEE Transactions on Information Theory,2012,58(5)：

[1]	. [J]. JOURNAL OF VIBRATION AND SHOCK, 2024, 43(2): 19-.