|
|
|
| Impact resistance mechanical properties of orthogonal trapezoidal honeycomb aluminum and protective application of nuclear equipment under simulation |
| XING Youdong,WANG Lihu,LU Shiqing,YANG Siyi |
| School of Mechanical Engineering， Shandong University of Technology, Zibo 255000, China |
|
|
|
|
Abstract In order to ensure the safety of the nuclear spent fuel transportation cask, impact limiters will be installed at both ends of the transportation cask, and inners are filled with filling materials to prevent from being punctured. In this paper, an orthogonal trapezoidal honeycomb aluminum material was prepared, and three different structural materials were loaded at different speeds. The relevant parameters obtained by the test are used for dynamic simulation using the finite element method, and the results of the test and simulation are compared, and it is found that they are consistent. To explore the influence of size on material properties, the mechanical properties of orthogonal trapezoidal honeycomb aluminum with different sizes (large size 500*500*500mm, small size 50*50*50mm) were compared by simulation, and it was found that the energy absorption between them has a functional relationship. In order to further reduce the simulation time, it is proposed to simulate the impact process with an equivalent model. Finally, the puncture process of the impact limiter of the transport cask is simulated, and the feasibility of the orthogonal trapezoidal honeycomb aluminum as the impact limiter filling material is characterized.
|
|
Received: 18 August 2022
Published: 28 August 2023
|
|
|
|
| Cite this article: |
|
XING Youdong,WANG Lihu,LU Shiqing, et al. Impact resistance mechanical properties of orthogonal trapezoidal honeycomb aluminum and protective application of nuclear equipment under simulation[J]. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(16): 166-174.
|
|
|
|
| URL: |
| http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2023/V42/I16/166 |
[1]Jiang H , Wang J A J . Spent nuclear fuel system dynamic stability under normal conditions of transportation [J]. Nuclear Engineering and Design, 2016, 310:1-14.
[2]Silverio L B , Lamas W D Q .An analysis of development and research on spent nuclear fuel reprocessing[J]. Energy Policy, 2011, 39(1):281-289.
[3]Xing Y , Yang S , Li Z , et al. Simulation and application of Bi-directional corrugated honeycomb aluminum as filling material for impact limiter of nuclear spent fuel transport cask[J]. Nuclear Engineering and Design, 2020, 361:110502.1-110502.13.
[4]Musolff A, Quercetti T, K. Müller, et al. Experimental testing of impact limiters for RAM packages under drop test conditions[J]. Packaging Transport Storage &Security of Radioactive Material, 2014, 25(3):133-138.
[5]Silva A D , Kyriakides S . Compressive response and failure of balsa wood[J]. International Journal of Solids and Structures, 2007, 44(25-26):8685-8717.
[6]汪佳明. 《放射性物质安全运输条例》(2009版) 对其 1996 版 (2003修订版) 的变更[J]. 辐射防护, 2011, 31(1): 57-61.
Wang Jiaming. Regulations for the Safe Transport of Radioactive Material”（2009 edition）relative to its1996 edition（as amended 2003）[J]. Radiation Protection, 2011, 31(1): 57-61.
[7] 汪佳明. 解读《放射性物质安全运输规程》GB 11806-2004中的货包试验[J]. 辐射防护, 2009(5):346-351.
Wang Jiaming. Summing-up and explanation of package tests in GB 11806-2004 “Regulations for the Safe Transport of Radioactive Material” [J]. Radiation Protection, 2009(5):346-351.
[8]中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会.放射性物质安全运输规程:GB 11806-2004[S]. 2004.
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration. Code for Safe Transport of Radioactive Materials: GB 11806-2004 [S] .2004
[9] LAN T B, REN Q, LIU X. Design and application of impact limiter for a spent fuel transport cask[J]. Nuclear Engineering and Design,2023,45:112207.
[10]陶俊林,蒋平,余作生.一种描述材料动态缓冲特性的新参数[J].振动与冲击,2001(04):14-17+96-97.
Tao Junlin, Jiang Ping, Yu Zuosheng. A new parameter of the dynamic buffer capability of material [J].Journal of Vibration and Shock, 2001(04):14-17+96-97.
[11]刘云川,窦金龙,汪旭光.冲击压缩载荷作用下杨木的力学性能研究[J]. 振动与冲击, 2009, 28(04):93-96+205-206.
Liu Yunchuan, Dou Jinlong, Wang Xuguang. Response of a Chinese white poplar under impact compressive load: experiment and analysis[J].Journal of Vibration and Shock, 2009, 2 8(04):93-96+205-206.
[12]WS Choi, KS Seo. A simple sizing optimization technique for an impact limiter based on dynamic material properties[J]. Nuclear Engineering and Design, 2010, 240(4): 925-932.
[13]Butler N. Computer modeling of wood-filled impact limiters[J].Nuclear Engineering & Design, 1994, 150(2-3): 417-424.
[14]Diersch R,Weiss M ,Dreier G . Investigation of the impact behavior of wooden impact limiters[J]. Nuclear Engineering & Design, 1994, 150(2-3): 341-348.
[15]白临奇,史小全,刘宏瑞,等.冲击载荷下箭头型负泊松比蜂窝结构动态吸能性能研究[J].振动与冲击,2021,40(11):70-77.
Bai Linqi, Shi Xiaoquan, Liu Hongrui, et al. Dynamic energy absorption performance of arrow type honeycomb structure with negative Poisson’s ratio under impact load[J]. JOURNAL OF VIBRATION AND SHOCK, 2021, 40(11): 70-77.
[16]杨辉,刘亚红,侯秀慧,等.铝蜂窝在压-剪组合荷载作用下的力学特性研究[J].振动与冲击,2020,39(12):121-128.
Yang Hui, Liu Yahong, Hou Xiuhui, etal. A study on the mechanical properties of aluminum honeycomb under
combined shear-compression loading[J]. Journal of Vibration and Shock, 2020, 39(12):121-128.
[17]邓小林,刘旺玉.一种负泊松比正弦曲线蜂窝结构的面内冲击动力学分析[J].振动与冲击,2017,36(13):103-109+154.
Deng Xiaolin, Liu Wangyu. In-plane impact dynamic analysis for a sinusoidal curved honeycomb structure with negative poisson’s ratio [J]. Journal of Vibration and Shock, 2017,36(13):103-109+154.
[18]李萌,刘荣强,郭宏伟,等.腿式着陆器用不同拓扑结构金属蜂窝吸能特性优化设计[J].振动与冲击, 2013, 32(21):7-14.
Li Meng, Liu Rongqiang, Guo Hongwei, etal. Crashworthiness optimization of different topological structures of metal honeycomb used in a legged-typed lander[J].Journal of Vibration and Shock, 2013, 32(21):7-14.
[19] HARRIGAN J J, REID S R, PENG C. Inertia effects in impact energy absorbing materials and structures[J]. International Journal of Impact Engineering, 1999, 22(9/10):955-979.
[20] 罗伟铭,石少卿,廖瑜,等. 成层式铝蜂窝夹芯结构冲击响应试验研究[J]. 材料导报, 2018, 32(008):1328-1332.
Luo Weiming, Shi Shaoqing, Liao Yu, etal. An Experimental Investigation upon the Impact Response of the Layered Aluminum Honeycomb Sandwich Structure [J]. Materials Reports, 2018, 32 (008): 1328-1332.
[21]J.J. HARRIGAN, S.R. REID, C. PENG. Inertia effects in impact energy absorbing materials and structures[J]. International journal of impact engineering, 1999, 22(9/10):955-979.
[22] SELIVANOV V V, SILNIKOV M V, MARKOV V A, et al. Using highly porous aluminum alloys and honeycomb structures in spacecraft landing gear[J]. Acta Astronautica, 2021, 180:105-109.
[23]Li Z , Yang S , Xu H , et al. Study on the two-way corrugated aluminum honeycomb as a filler material in impact limiters for spent fuel transport casks[J]. Journal of Nuclear Science & Technology, 2019:1-7.
[24]李忠芳. 核乏燃料运输容器减震器填充材料的研究[D]. 山东:山东理工大学,2019.
Li Zhongfang. Study on the filler material in impact limiters for nuclear spent fuel transport cask [D]. Shandong: Shandong University of Technology, 2019.
[25]高家禄. 抗穿刺B型"软"容器研究[J]. 国外核新闻, 1983(02):24+32.
Gao Jialu. Research on puncture-resistant B-type "soft" container[J]. Foreign Nuclear News, 1983(02):24+32.
[26]徐超. 基于安全分析的乏燃料运输容器关键技术研究[D]. 杭州: 浙江大学, 2012
XU Chao. Research on Key Technologies of Safety Design for Spent Fuel Transportation Cask[D]. Hangzhou: Zhejiang University, 2012.
[27]蓝霄. 放射性物质运输容器缩比模型跌落试验的数值模拟[D]. 太原理工大学,2018.
Lan Xiao. Numerical simulation of drop test of scale model for radioactive material transport container[D]. Taiyuan University of Technology.
[28]许艳涛, 马渊睿, 李晨,等. 燃料运输容器跌落姿态分析技术[J]. 包装工程, 2017, 38(21):20-24.
Xu Yantao, Ma Yuanrui, Li Chen, et al. Drop gesture analysis of the fuel transport cask [J]. Packaging Engineering, 2017, 38(21):20-24.
[29]刘广东, 吴维亮, 朱贺,等. 事故工况下乏燃料运输容器跌落分析[J]. 包装工程, 2017, 38(21):31-34.
Liu Guangdong, Wu Weiliang, Zhu He, et al. Drop analysis of the spent nuclear fuel transport cask under accident conditions [J]. Packaging Engineering, 2017, 38(21):31-34.
[30]汪军, 王志豪, 衣大勇,等. YG-1型运输容器跌落分析与结构优化[J]. 原子能科学技术, 2016, 10:1853-1858.
Wang Jun, Wang Zhihao, Yi Dayong, et al. Dropping analysis and structure optimization of YG-1 Cask[J]. Atomic Energy Science and Technology, 2016, 10:1853-1858.
[31]陈志华, 聂羽飞. 基于ANSYS/LS-DYNA的运输容器跌落分析[J]. 包装与食品机械, 2016, 34(6):35-38.
Chen Zhihua, Nie Yufei. Dropping analysis of shipping container based on ANSYS /LS-DYNA[J]. Packaging and Food Machinery, 2016, 34(6):35-38.
[32]李海龙, 孙造占, 孙树海,等. 放射性物质运输容器的跌落冲击分析方法[J]. 核技术, 2013(4):340-343.
Li Hailong, Sun Zaozhan, Sun Shuhai, et al. Drop impact analysis method for radioactive material transport containers [J]. NUCLEAR TECHNIQUES , 2013(4):340-343.
[33]苏子星,何继业.基于Cowper-Symonds方程的相似理论修正方法[J].爆炸与冲击,2018,38(03):654-658.
Su Zixing, He Jiye. Modified method for scaling law based on Cowper-Symonds equation [J]. Explosion and Shock Waves, 2018,38(03):654-658.
[34]WU X, Y H, GUO L, et al. Experimental and numerical investigation of static and fatigue behaviors of composites honeycomb sandwich structure[J]. Composite Structures, 2019, 213:165-172.
[35]陈升辉,郭彦峰,付云岗,等.一种横截面为正五/六边形的四层复合材料管轴向冲击吸能研究[J].兵工学报，2022：1-9.
Chen Shenghui, Guo Yanfeng, Fu Yungang, et al. Cushioning energy absorption of four-layered composite tubes with regular pentagon and hexagon cross-sections under axial drop impact[J].Acta Armamentarii, 2022: 1-9.
[36]周金翠,盛美萍,张安付.基于有限元模型的蜂窝芯层面内等效弹性模量仿真[J].机械强度,2015,37(03):488-492.
Zhou Jincui, Sheng Meiping, Zhang Anfu. Equivalent elastic modulus of the honeycomb core based on fem model[J]. Journal of Mechanical Strength, 2015,37(03):488-492.
[37]陈平.燃料电池插电式混合动力轿车关键技术研究[D].清华大学, 2017:108-110.
Chen Ping. Research on key technologies of fuel cell plug-in hybrid electric passenger cars [D]. Tsinghua University, 2017: 108-110.
[38]欧阳昊.蜂窝铝压缩侵彻力学行为的数值模拟研究[D].中国工程物理研究院, 2015:44-51.
Ouyang Hao. Numerical Simulation of Compression Penetration Mechanical Behavior of Honeycomb Aluminum [D]. China Academy of Engineering Physics, 2015: 44-51.
[39] Youdong Xing, Siyi Yang, Shiqing Lu, etal. Energy absorption and optimization of Bi-directional corrugated honeycomb aluminum[J]. Composites Part B: Engineering, 2021(219),108914.
[40]Diersch R , Weiss M , Dreier G . Investigation of the impact behaviour of wooden impact limiters[J]. Nuclear Engineering & Design, 1994, 150(2-3):341-348.
[41]刘新华.放射性物品安全运输概论[M].科学出版社,2015:2-3.
Liu Xinhua. An Introduction to the Safe Transport of Radioactive Materials [M]. Science Press, 2015: 2-3.
[42]邢攸冬,杨思一,安钰坤,等.核乏燃料运输容器减震器填充材料 研究进展[J].包装工程, 2019,40(21):111-117.
Xing Youdong, Yang Siyi, An Yukun, et al. Research progress in impact limiter filling materials for nuclear spent fuel transport casks [J]. Packaging Engineering, 2019, 40(21): 111-117. |
|
|
|
