基于Johnson接触模型的内啮合直齿轮系统多状态啮合动力学建模与分析

Abstract
Figure/Table
References (19)
Related Citation (15)

Download: PDF (1711 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The accurate explanation of the tooth deregulation or back meshing induced by the backlash can provide theoretical guidance for the optimal design of the gear structure. Based on the Johnson contact force model, the dynamic meshing force calculation model of involute internal meshing spur gear transmission system is constructed, which takes into account the time-varying backlash and energy dissipation in the meshing process, according to the meshing principle of internal meshing spur gear and the force of gear teeth, the meshing process is decomposed, and the nonlinear dynamic model of involute internal meshing spur gear system with five meshing states under time-varying backlash is established. Five different Poincaré maps are constructed to clarify the characteristics of five-state meshing behavior, and the generation mechanism of multi-state meshing behavior of the system is revealed by phase diagram and dynamic meshing force time history diagram. The results show that with the gradual increase of the meshing frequency, the single-tooth and double-tooth surface meshing occurs in the system, and the sudden change of the dynamic meshing force in the direction leads to the meshing between the gear teeth and the back of the single-tooth and double-tooth, resulting in the impact vibration behavior between the gear teeth. Even if the system shows a stable meshing state, the single and double teeth dismeshing still occurs. The previous dynamic model of internal meshing gear system can not reveal its multi-state meshing characteristics. Aiming at the multi-state meshing behavior, this paper analyzes the nonlinear vibration characteristics of internal meshing gear transmission cycle.

Key words： internal meshing spur gear multi-state meshing behavior dynamic meshing force nonlinear vibration

Received: 09 October 2022 Published: 28 September 2023

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	MA Xiaojing1
	SHI Jianfei1
	ZHANG Tianlin2
	DANG Xingwu1
	ZHANG Li1

Cite this article:

MA Xiaojing1,SHI Jianfei1,ZHANG Tianlin2, et al. Multi-state meshing dynamics modeling and analysis of an internal meshing spur gear system based on the Johnson contact model[J]. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(18): 54-62.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2023/V42/I18/54

[1] 张展. 渐开线内啮合圆柱齿轮传动[M]. 国防工业出版社, 1991.
Zhang zhan.Involute cylindrical gear transmission[M].Nationaldefense industry press,1991.
[2] Xiang D,Shen Y,Wei Y. A Contact Force Model Considering Meshing and Collision States for Dynamic Analysisin Helical Gear System[J]. Chinese Journal of Mechanical Engineering, 2019, 32(3):12-15.
[3] K H Hunt, F R E Crossley. Coefficient of restitution interpreted as damping in vibroimpact.Journal of Applied Mechanics, 1975, 42(2): 440-445.
[4] Lankarani, H.M., Nikravesh, P .E.: Continuous contact force models for impact analysis in multibodysystems[J]. Nonlinear Dynamics,1994, 5(3):193–207.
[5] Kahraman A , Singh R.Interactions between time-varying mesh stiffness and clearance non-linearities in a geared system[J]. Journal of Sound and Vibration, 1991, 146(1):135-156.
[6] Nevzat Özgüven N, Houser DR. Mathematical models used in geardynamics. Journal of Sound and Vibration,1988, 121(3): 383-411.
[7] F H Liu,S Theodossiades,L A Bergman,et al. Analytical charate
-rization of damping in gear teeth dynamics under hydrodynamic conditions. Mechanism and Machine Theory, 2015, 94: 141-147.
[8] Chen C Z,Zhang L,Liu J,et al. Dynamic model of wind turbine planetary gear set with mixed elastohydrodynamic lubrication friction force[J]. Actaenergiae solaris sinica,2016,37(7):1695-1701.
[9] Huang Xing-bao, Yang Bin-tang. A nano lubrication solution for high-speed heavy-loaded spur gears and stiffness modelling [J]. Applied Mathematical Moedlling, 2019,5(6): 262−272.
[10] 苑士华,董辉立,李雪原. 基于MEPE和EHL理论的渐开线斜齿轮啮合特性分析[J].机械工程学报, 2012, 48(19): 10-16.
YUAN Shihua,DONG Huili,LI Xueyuan. Contact analysis of helical gears based on MEPE and EHL theories[J]. Journal of Mechanical Engineering,2012,48 (19): 10-16
[11] 向玲,贾轶,高雪媛.间隙对齿轮－转子－轴承系统弯扭耦合振动的影响分析[J].振动与冲击,2016,35(21) : 1-9.
Xiang Ling,Jia Yi,Gao Xueyuan. Analysis of the influence on the coupled vibration of the clearance gear-rotor-bearing system [J]. journal of Vibration and shock, 2016,35(21) : 1-9.
[12] 石建飞,苟向锋,朱凌云.计及摩擦的多状态啮合渐开线直齿轮系统动力学建模分析[J].西北工业大学学报, 2020, 38(2):401-410.
Shi Jianfei,Gou Xiangfeng,Zhu Lingyun. Dynamic modeling analysis of multi-state meshing involute spur gear system cons-idering friction[J]. journal of northwestern polytechnical uni
-versity,2020, 38(2):401-410.
[13] Shi, J., Gou, X., Zhu, L.: Calculation of time-varying backlash for an involute spur gear pair. Mechanism and Machine Theory,2020,142,103-107.
[14] Li, Z., Zhu, C., Liu, H., et al.: Mesh stiffness and nonlinear dynamic response of a spur gear pair considering tribo-dynamic effect. Mechanism and Machine Theory,2020, 153, 103-106.
[15] Wang, G., Chen, L., Yu, L., et al.: Research on the dynamic transmission error of a spur gear pair with eccentricities by finite element method. Mechanism and Machine Theory,2017, 109: 1–13.
[16] Hertz, H.: On the contact of solids-on the contact of rigid el-astic solids and on hardness[J]. Miscel-laneous Papers,189 6,2(3),146–183.
[17] Johnson, K.L.: One hundred years of Hertz contact. Proc[J]. Proceedings of the Institution of Mechanical Engineers, 1982, 196(1):363–378.
[18] HE S,CHO S,INGHＲ.Prediction of Dynamic Friction Force in Spur Gears Using Alternate Sliding Friction Formulation[J]. Journal of Sound and Vibration,2008,309: 843-851.
[19] Pedrero, J.I., Pleguezuelos, M., Arte´s, M., et al.: Load distribution model along the line of contact for involute external gears. Mechanism and Machine Theory,2010, 45(5), 780–794 .