考虑结合面接触刚度的机床床身动态特性分析

Abstract
Figure/Table
References (24)
Related Citation (15)

Download: PDF (2289 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The stiffness of the joint surface is an important factor that affects the dynamic characteristics and machining accuracy of a machine tool. To accurately determine the dynamic parameters of the machine tool, a prediction model is used to obtain the contact stiffness of the bed joint surface, and an equivalent dynamic model is established. Firstly, the contact stiffness prediction model is developed. Secondly, the prediction model is used to identify the contact stiffness of the joint surface between two materials (cast iron and mineral composite). Thirdly, using the contact characteristic parameters of the joint surface, a finite element model based on spring element constraint is created. Finally, comparing the finite element modal frequency with the experimental modal frequency reveals that the finite element modal frequency, based on the spring element constraint, aligns well with the experimental modal frequency. This indicates that the model is effective for both cast iron and mineral composites. The results demonstrate that incorporating the contact stiffness of the joint surface in the finite element model of the machine tool bed leads to a more reasonable representation. This provides a theoretical foundation for analyzing the dynamic characteristics of the machine tool and optimizing its structure.

Key words： joint surface contact stiffness dynamic characteristics modal test

Received: 31 October 2023 Published: 28 April 2024

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Shusheng1
	SHI Jun2
	SUN Jianhong2
	QIN Wenqiang3
	ZENG Yanhong3
	ZHANG Song1

Cite this article:

LIU Shusheng1,SHI Jun2,SUN Jianhong2, et al. Dynamic characteristic analysis of machine tool bed considering contact stiffness of joint surface[J]. JOURNAL OF VIBRATION AND SHOCK, 2024, 43(8): 310-318.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2024/V43/I8/310

[1] L Li, Q Q Yun, Z Q Li, et al. A new contact model of joint surfaces accounting for surface waviness and substrate deformation [J]. International Journal of Applied Mechanics, 2019, 11(8): 22.1950079. [2] 陈学前, 沈展鹏, 刘信恩,等. 典型螺栓连接界面轴向动态特性的不确定性研究 [J].振动与冲击, 2021, 40(10): 20-24+56. CHEN Xueqian, SHEN Zhanpeng, LIU Xinen, et al. Uncertainty analysis on the normal dynamic characteristics of bolted joint interfaces [J]. Journal of Vibration and Shock, 2021, 40(10): 20-24+56. [3] J A Greenwood, J B Williamson. Contact of nominally flat surfaces [J]. Proceedings of the Royal Society of London. Series A. Mathematical, Physical and Sciences, 1966, 295(1442): 300-319 [4] W R Chang, I Etsion, D B Bogy. An elastic-plastic model for the contact of rough surfaces [J]. Journal of Tribology-Transactions of the ASME , 1987, 109(2): 257-263 [5] L Kogut, I Etsion. Elastic-plastic contact analysis of a sphere and a rigid flat [J]. Journal of Applied Mechanics-Transactions of the ASME , 2002, 69(5): 657-662 [6] R L Jackson, I Green. A statistical model of elasto-plastic asperity contact between rough surfaces [J]. Tribology International, 2006, 39(9): 906-914 [7] M R Brake. An analytical elastic-perfectly plastic contact model [J]. International Journal of Solids and Structures, 2012, 49(22): 3129-3141 [8] L Gorbatikh, M Popova. Modeling of a locking mechanism between two rough surfaces under cyclic loading [J]. International Journal of Mechanical Sciences, 2006, 48(9): 1014-1020 [9] K Lida, K Ono. Design consideration of contact/near-contact sliders based on a rough surface contact model [J]. Journal of Tribology-Transactions of the ASME , 2003, 125(3): 562-570 [10] T Zhao, Y T Feng. Extended Greenwood-Williamson models for rough spheres [J]. Journal of Applied Mechanics-Transactions of the ASME, 2018, 85(10).101007. [11] M Ciavarella, J A Greenwood, M Paggi. Inclusion of "interaction" in the Greenwood and Williamson contact theory [J]. Wear, 2008, 265(5-6): 729-734 [12] Y W Zhao, L Chang. A model of asperity interactions in elastic-plastic contact of rough surfaces [J]. Journal of Tribology-Transactions of the ASME , 2001, 123(4): 857-864 [13] Z C Tang, Y Y Jiao, L N Y Wong. Theoretical model with multi-asperity interaction for the closure behavior of rock joint [J]. International Journal of Rock Mechanics and Mining Sciences, 2017, 97: 15-23 [14] MASATAKA, YOSHIMURA. Computer Aided Design of Machine Structures with respect to Static and Dynamic Characteristics by Synthesis of Dynamic Rigidity Program System Study for Analysis of Structural Dynamics of Machine Tools (3rd Report) [J]. Journal of the Japan Society of Precision Engineering, 1975, (5): 1060-1065 [15] 黄玉美, 傅卫平, 佟浚贤. 获取结合面实用切向阻尼参数的方法 [J].西安理工大学学报, 1996, (01): 1-5. HUANG Yumei, FU Weiping, TONG Junxian. A method of acquiring applied tangential damping parameters of joint surfaces [J]. Journal of Xi'an University of Technology, 1996, (01): 1-5. [16] 王立华, 罗建平, 刘泓滨,等. 铣床关键结合面动态特性研究 [J].振动与冲击, 2008, (08): 125-129+183. WANG Lihua, LUO Jianping, LIU Hongbin, et al. Research on dynamic charcteristics of key machine joint surfaces of the numerically controled milling machine [J]. Journal of Vibration and Shock, 2008, (08): 125-129+183. [17] 陈虹旭, 董冠华, 殷勤,等. 基于分形理论的结合面法向接触刚度模型 [J].振动与冲击, 2019, 38(08): 218-224. CHEN Hongxv, DONG Guanhua, YIN Qin, et al. A normal contact stiffness model of joint surface based on the fractal theory [J]. Journal of Vibration and Shock, 2019, 38(08): 218-224. [18] 付振彪, 王太勇, 张雷,等. 滚珠丝杠进给系统动力学建模与动态特性分析 [J].振动与冲击, 2019, 38(16): 56-63. FU Zhenbiao, WANG Taiyong, ZHANG Lei, et al. Dynamic modeling and vibration analysis of ball screw feed driving systems [J]. Journal of Vibration and Shock, 2019, 38(16): 56-63. [19] L S Fan, S J Wang, J W Wu, et al. Modeling of normal contact stiffness of joint considering the horizontal distance distribution and interaction between asperities [J]. Chinese Journal of Mechanical Engineering, 2022, 58(21): 201-214 [20] L Li, J J Wang, X H Shi, et al. A modified elastoplastic contact stiffness model considering continuous smooth contact characteristics and substrate deformation [J]. Acta Mechanica Solida Sinica, 2021, 34(5): 754-765 [21] P Bhattacharyya, B K Chakrabarti. The mean distance to the nth neighbour in a uniform distribution of random points: an application of probability theory [J]. The European Physical Journal A， 2008, 29(3): 639-645 [22] J A Greenwood. A simplified elliptic model of rough surface contact [J]. Wear, 2006, 261(2): 191-200 [23] ZOU Q, SUN T S, NASSAR S, et al. Contact mechanics approach to determine effective radius in bolted joints [J]. Journal of Tribology-Transactions of the ASME, 2005, 127(1): 30-36 [24] 魏莎, 郑冰月, 张忠,等. 基于模态试验的对接圆柱壳结构有限元模型修正 [J].振动与冲击, 2022, 41(17): 9-17. WEI Sha, ZHENG Bingyue, ZHANG Zhong, et al. Finite element model updating of butted cylindrical shell structure based on modal tests [J]. Journal of Vibaration and Shock, 2022, 41(17): 9-17.