基于IAS信号自适应窄带解调的RV减速器摆线轮故障特征提取

Abstract
Figure/Table
References (15)
Related Citation (9)

Download: PDF (2046 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The RV reducer is widely used in industrial robots, and it has great significance to research the fault detection method of its key components. Due to the complex structure of the RV reducer, low rotating speed of the cycloidal gear, and weak fault impact etc, it is difficult to extract the fault features of the cycloidal gear using conventional vibration analysis methods. To solve above problems, a method based on encoder signals for extracting the fault features of the cycloidal gear in RV reducer is proposed. Firstly, the encoder angle signals are collected, and then the instantaneous angular velocity signals are obtained using the forward difference method. Based on this, the angular domain synchronous averaging is used to extract the cycloidal gear period-related synchronous components, eliminate asynchronous interference, and select the gear harmonics frequency bands with rich fault information by constructing a sideband signal-to-noise ratio index for bandpass filtering. Finally, the filtered signal is narrowband demodulated to achieve fault feature extraction of the cycloidal gear in the RV reducer. Experimental results show that this method can effectively extract the fault features of the cycloidal gear in the RV reducer, and achieve adaptive optimization of bandwidth selection.

Key words： RV reducer cycloidal gear instantaneous angular speed Sideband signal-to-noise ratio index narrow-band demodulation

Received: 31 July 2023 Published: 15 May 2024

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Jiayuan
	GUO Yu

Cite this article:

ZHANG Jiayuan,GUO Yu. Fault feature extraction of RV reducer cycloidal gear based on adaptive narrowband demodulation of IAS signals[J]. JOURNAL OF VIBRATION AND SHOCK, 2024, 43(9): 261-266.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2024/V43/I9/261

[1] 宿月文,郭彩霞,王参军等.传动可靠度约束下RV减速器加工精度等级优选方法[J].振动与冲击,2023,42(02):7-15.2023.02.002. SU Yuewen, GUO Caixia, WANG Canjun, et al. Selection of optimal manufacuturing tollerance level for a RV reducer under the contrasint of transmission reliability[J]. Journal of Vibration and Shock, 2023,42(02):7-15.2023.02.002. [2] 焦博森，蔺梦雄，张益农等. RV减速器故障诊断方法研究现状[J]. 现代制造工程, 2023(06): 150-159. 2023. 06. 024. JIAO Bosen, LIN Mengxiong, ZHANG Yinong,et al. Research status of RV reducer fault diagnosis method[J]. Modern Manufacturing Engineering,2023(06): 150-159. 2023. 06. 024. [3] KLAUSEN A, ROBBERSMYR K G. Cross-correlation of whitened vibration signals for low-speed bearing diagnostics[J]. Mechanical Systems and Signal Processing,2019, 118: 226-244． [4] 欧曙东，赵明，周涛等.基于编码器信号的低转速行星齿轮箱故障诊断技术[J].中国电机工程学报,2021, 41(05): 1885-1894. OU Shudong, ZHAO Ming, ZHOU Tao, FAN Hongwei. Fault Diagnosis Technology for Low-speed Planetary Gearbox Based on Encoder Signals[J]. Proceedings of the CSEE, 2021, 41(05): 1885-1894. [5] GUO Yu, ZHAO Lei, WU Xing, et al. Tooth Root Crack Detection of Planet and Sun Gears Based on Resonance De-modulation and Vibration Separation[J]. IEEE Transactionson Instrumentation and Measurement, 2020, 69. [6] MCFADDEN P D. A technique for calculating the time domain averages of the vibration of the individual planet gears and the sun gear in an epicyclic gearbox[J]. Journal of Sound and Vibration, 1991, 144 ( 1 ) : 163-172． [7] 华健翔,郭瑜,陈鑫等.基于局部同步拟合和窄带解调的行星传动齿根裂纹故障检测[J].（2022-06-10）. https://kns.cnki.net/kcms/detail/11.2297.V.20220609.2219.002.html. [8] Ming Zhao, Xiaodong Jia, Jing Lin, et al. Instantaneous speed jitter detection via encoder signal and its application for the diagnosis of planetary gearbox,Mechanical Systems and Signal Processing,2018，98：16-31 [9] MCFADDEN P D. Detecting fatigue cracks in gears by am-plitude and phase demodulation of the meshing vibration[J]. Journal of Vibration and Acoustics. 1986, 10(2): 165-170. [10] 刘倩楠，郭瑜，伍星. 基于频移及谱线编辑的齿轮故障窄带解调分析方法[J]. 振动与冲击, 2015, 34(16): 38-42. LIU Qiannan, GUO Yu, WU Xing. Gear fault analysis based on narrowband demodulation with frequency shift and spectrum edit[J]. Journal of Vibration and Shock, 2015, 34(16):38-42. [11] GUO Yu, ZHAO Lei, XIN Wu, et al. Vibration separation technique based localized tooth fault detection of planetary gear sets: a tutorial[J]. Mechanical Systems and Signal Processing, 2019, 129( 8) : 130-147. [12] WANG B，DING C. Transient feature identification from internal encoder signal for fault detection of planetary gearboxes under variable speed conditions[J]. Measurement, 2021, 171: 108761． [13] 尹兴超，郭瑜，李震焘等. 基于瞬时角速度信号窄带解调的太阳轮故障检测[J]. 振动与冲击, 2023, 42(05): 263-268+278. YIN Xingchao, GUO Yu, LI Zhentao, et al. Fault detection of sun gear based on narrowband demodulation of IAS signals[J]. Journal of Vibration and Shock, 2023, 42(05):263-268+278. [14] LI B, ZHANG X, WU T. Measurement of instantaneous angular displacement fluctuation and its applications on gearbox fault detection[J]. ISA Transactions, 2018, 74: 245 -260． [15] 徐宏海, 王文涛, 刘学翱等. RV减速器工作频率理论计算与ADAMS仿真[J]. 机械传动, 2015, 39(07):38-41+46. XU Honghai, WANG Wentao, LIU Xueao, et al. Theoretical Calculation and ADAMS Simulation of RV Reducer Operating Frequency[J]. Journal of Mechanical Transmission, 2015, 39(07): 38-41+46.