|
|
|
| Modal Analysis of Marine Compound NC Machine Combined with Guide-slider Viscous Damping |
| SUN Ye-wang1, 2, ZHANG Zhi-jing1, JIN Xin1, ZHANG Jia-ying2, XU Bin-shi2, DENG Yong-jun1 |
| 1. School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China; 2. National Key Laboratory for Remanufacturing, Academy of Armored Forces Engineering, Beijing 100072, China |
|
|
|
Abstract To study the dynamic characteristics of marine NC compound machine, the machine motion coordinate and layout scheme were analyzed based on the analysis of the ship sway characteristics under wave loads, and the 5-DOF load of the machine key guide-slider motion was studied. Then, the guide-slider viscous damping vibration model and its finite element method (FEM) machine model were created based on machine vibration theory, and the machine hammering experimental modal method and FEM modal method were used to study the machine modal. The results show that the guide-slider vibration model and the FEM machine model are correct, and there are 6 modal shapes of the machine within 110Hz.
|
|
Received: 17 December 2013
|
|
|
|
[1] 徐滨士.徐滨士院士教学、科研文选[M].北京：化学工业出版社，2010.
XU Bin-shi. Selections from academician XU Bin-shi’s achievements [M]. Beijing: Chemical Industry Press, 2010.
[2] Daniele D. Slamming clustering on fast ships: from impact dynamics to global response analysis [J]. Ocean Engineering, 2013, 62:110-122.
[3] 盛振邦，刘应中. 船舶原理[M].上海：上海交 通大学出版社，2004.
SHENG Zhen-bang, LIU Ying-zhong. Ship theory [M].Shanghai: Shanghai Jiao Tong University Press, 2004.
[4] 邵开文, 马运义.舰船技术与设计概论[M].北京：国防工业出版社，2005.
SHAO Kai-wen, MA Yun-yi. Ship technology and design [M].Beijing: National Defense Industry Press, 2005.
[5] 李积德. 船舶耐波性[M].哈尔滨：哈尔滨工程大学出版社，2007.
LI Ji-de. Ship seakeeping performance [M]. Harbin: Harbin Engineering University Press, 2007.
[6] Junker J J. Stochastic procedures for extreme wave load predictions-wave bending moment in ships [J]. Marine Structures, 2009, 22: 194-198.
[7] HIWIN集团，线性滑轨技术手册[EB/OL]. www.hiwinlc.com.cn, 2013.
HIWIN Group, linear guideway technical information [EB/OL]. www.hiwinlc.com.cn, 2013.
[8] 杨橚，唐恒龄，廖伯瑜. 机床动力学[M]. 北京: 机械工业出版社, 1983.
YANG Su, TANG Heng-ling, LIAO Bo-yu. Machine Dynamics [M].Beijing: China Machine Press, 1983.
[9] 诸乃雄.机床动态设计原理与应用 [M].上海：同济大学出版社，1987.
ZHU Nai-xiong. Machine dynamic design theory and application [M]. Shanghai: Tongji University Press, 1987.
[10] 刘称意. 考虑导轨结合面影响的数控机床动态特性分析及结构优化 [D].沈阳：东北大学, 2010.
LIU Chen-yi. Study on Dynamic Characteristics and Structural Optimization of CNC Machine Tool Considering Influence of Rolling Guide Joint [D]. Shenyang: Northeartern University Press, 2010.
[11] 应怀樵. 现代振动与噪声技术 [M]. 北京：航空工业出版社，2011.
YING Huai-jiao. Modern Vibration and Noise Technology [M]. Beijing: Aviation Idustry Press, 2011.
[12] Michael Z Q, HU Y L, HUANG L X. Influence of inerter on natural frequencies of vibration systems [J]. Journal of Sound and Vibration, 2014, 333: 1874-1887.
[13] Li Y, Lin M. Regular and irregular wave impacts on floating body [J]. Ocean Engineering, 2012, 42:93-101.
|
|
|
|
