主轴-刀柄-刀具系统刀尖频响函数的预测方法研究

Abstract
Figure/Table
References (16)
Related Citation (15)

Download: PDF (1252 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Tool point frequency response function (FRF) is a prim need for constructing the stability lobe diagrams. Based on Timoshenko beam theory considering rotary inertia and shear deformation, all components of the spindle-holder-tool assembly are modeled as multi-segment Timoshenko beams. This study proposed an analytical method for obtaining the tool point FRF of a given combination by using transfer matrix and receptance coupling approaches. Compared with the calculation results of mode superposition method, the algorithm proposed is verified. The new prediction method can help to obtain the tool point FRFs of machine tools more precisely and quickly, so more accurate stability lobe diagrams can be achieved, and it can lay a foundation for ensuring the stability of high speed cutting processes.

Key words： tool point FRF Timoshenko beam RCSA transfer matrix

Received: 28 January 2014 Published: 15 July 2015

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Erhua 1 WU Bo2 HU Youmin2 WANGJun 2 YANG Shuzi 2

Cite this article:

WANG Erhua 1 WU Bo2 HU Youmin2 WANGJun 2 YANG Shuzi 2. Tool point FRF prediction researches of spindle-holder-tool system[J]. JOURNAL OF VIBRATION AND SHOCK, 2015, 34(13): 83-88.

URL:

http://jvs.sjtu.edu.cn/EN/ OR http://jvs.sjtu.edu.cn/EN/Y2015/V34/I13/83

[1] E. Budak, Y. Altintas. Analytical prediction of chatter stability in milling-Part I: general formulation; Part II: application to common milling systems [J]. Transactions of ASME, Journal of Dynamic Systems, Measurement, and Control, 1998, 120: 22-36.
[2] E.B. Kivanc, E. Budak, et al. Structural modeling of end mills for form error and stability analysis [J]. International Journal of Machine Tools and Manufacture, 2004, 44 (11): 1151-1161
[3] T. Schmitz. Predicting high-speed machining dynamics by substructure analysis [J]. CIRP Ann., 2000, 49 (1): 303-308.
[4] T. Schmitz, M. Davies, M. Kennedy. Tool point frequency response prediction for high-speed machining by RCSA [J]. Journal of Manufacturing Science and Engineering, 2001, 123: 700-707.
[5] Simon S. Park, Yusuf Altintas, Mohammad Movahhedy. Receptance coupling for end mills [J]. International Journal of Machine Tools & Manufacture, 2003, 43: 889-896.
[6] T. Schmitz，G. Scott Duncan. Three-component receptance coupling substructure analysis for tool point dynamics prediction [J]. Journal of Manufacturing Science and Engineering, 2005, 127: 781-790.
[7] A. Ertürk, H.N. Özgüven, E. Budak. Analytical modeling of spindle–tool dynamics on machine tools using Timoshenko beam model and receptance coupling for the prediction of tool point FRF [J]. International Journal of Machine Tools & Manufacture, 2006, 46: 1901-1912.
[8] 胡峰，吴波，胡友民，史铁林. 基于概率神经网络和KS检验的机械状态监测.振动与冲击，2008，4: 56-62.
[8] Feng Hu, Bo Wu, Youmin Hu, Tielin Shi. Machine condition monitoring based on probabilistic neural network and KS inspection [J]. Vibration and Shock, 2008, 4:56-62.
[9] 胡峰，吴波，胡友民，史铁林. 利用粒子群优化算法实现阻尼和频率的精确识别. 振动与冲击，2009, 7: 8-11.
[9] Feng Hu, Bo Wu, Youmin Hu, Tielin Shi. Precise identification of damping and frequency by using particle swarm optimization [J]. Vibration and Shock, 2009, 7:8-11.
[10] S.P. Timoshenko. On the correction for shear of the differential equation for transverse vibrations of prismatic bars [J]. Philosophical Magazine, 1921, 41: 744-746.
[11] 包世华. 结构动力学[M]. 武汉: 武汉理工大学出版社, 2005.
[11] Shihua Bao, 2005, Structural Dynamics, Wuhan: Wuhan University of Technology Press, 93-105
[12] 杨肃，唐恒龄，廖伯瑜等. 机床动力学（Ⅱ）[M]. 北京：机械工业出版社，1983.
[12] Su Yang, Hengling Tang, Boyu Liao, 1983, Machine tool dynamics, Beijing: China Machine Press, 261-298.
[13] 楼顺天，刘小东，李博菡. 基于MATLAB 7.X的系统分析与设计[M]. 西安：西安电子科技大学出版社，2005.
[13] Shuntian Lou, Xiaodong Liu, Bohan Li, 2005, System Analysis and Design based on MATLAB 7.X, Xi’an: Xidian University Press.
[14] Cook, Robert D. Concepts and Applications of Finite Element Analysis [M]. Newyork: Wiley, 2001.
[15] 薛风先，胡仁喜，康士廷等. 机械与结构有限元分析[M]. 北京：机械工业出版社，2010.
[15] Fengxian Xue, Renxi Hu, Shiting Kang, 2010, Finite Element Analysis of Mechanics and Structure, Beijing: China Machine Press.
[16] 王二化，吴波，胡友民，等. 主轴-刀柄和刀柄-刀具结合面参数辨识研究. 振动与冲击，2014，33(10): 50-54.
[16] Wang Er-hua, Wu Bo, Hu You-min, et al. Parameter identification of spindle-holder and holder-tool interfaces. 2014, 33(10):50-54.